Speciaal voor onze zakelijke klanten en partners: tijdelijk scherpere inkoopprijzen op Nice, frient, Aqara, Shelly, Govee en Sonos. Bekijk hieronder de Black Friday deals per merk en profiteer zolang de actie loopt.
Actieperiode: maandag 23 t/m maandag 30 november 2026. De Black Friday deals gelden zolang de voorraad strekt. Bestellingen kunnen we alleen uit bestaande voorraad leveren, nabestellen (backorders) is tijdens deze actie helaas niet mogelijk.
The long-awaited Sonos Ace is a high-end headset. Through collaboration with leading producers, technicians and artists, the Sonos Ace provides a great sound experience. The headphones have a battery life of 30 hours when Active Noise Cancellation is enabled and with fast charging technology you can use the Sonos Ace for another 3 hours in 3 minutes. You can fully charge it in 3 hours.The Sonos Ace can be connected to multiple audio sources, a maximum of 2 at the same time. You can also easily switch between these 2 sources, this is what you do with the built-in buttons. With the included cables you can easily connect the Sonos Ace to a USB-C and 3.5mm jack audio source.FeaturesActive Noise Cancellationto 30 hours of battery life (with Active Noise Cancellation enabled)Fast charging 3 minutes for 3 hours of battery life (empty to full in 3 hours)< /span>Lossless audioSpatial Audio (only with suitable audio source)Works with Apple and AndroidBluetoothMicrophone for callsBuilt-in buttons for volume, play/pause, skip, noise cancellation, voice assistant and calls recording.TV Audio swap (with a compatible Sonos Soundbar)Connection to wired audio sources possible
The long-awaited Sonos Ace is a high-end headset. Through collaboration with leading producers, technicians and artists, the Sonos Ace provides a great sound experience. The headphones have a battery life of 30 hours when Active Noise Cancellation is enabled and with fast charging technology you can use the Sonos Ace for another 3 hours in 3 minutes. You can fully charge it in 3 hours.The Sonos Ace can be connected to multiple audio sources, a maximum of 2 at the same time. You can also easily switch between these 2 sources, this is what you do with the built-in buttons. With the included cables you can easily connect the Sonos Ace to a USB-C and 3.5mm jack audio source.FeaturesActive Noise Cancellationto 30 hours of battery life (with Active Noise Cancellation enabled)Fast charging 3 minutes for 3 hours of battery life (empty to full in 3 hours)< /span>Lossless audioSpatial Audio (only with suitable audio source)Works with Apple and AndroidBluetoothMicrophone for callsBuilt-in buttons for volume, play/pause, skip, noise cancellation, voice assistant and calls recording.TV Audio swap (with a compatible Sonos Soundbar)Connection to wired audio sources possible
The Sonos Arc Ultra brings your entertainment to life. Experience deeper bass and more detailed sound. All this in a sleek modern design, made possible by the groundbreaking Motion™ technology.
Install the Arc Ultra with the included HDMI cable and enjoy easy control with the TV remote control. You can also use the Sonos app, the controls on top of the soundbar or with Sonos Voice Control and Amazon Alexa.
Easily stream your music via WiFi and Bluetooth. Add a Sonos Sub or Era speakers for the ultimate Dolby Atmos surround sound experience.Sonos Arc Ultra vs Sonos Arc
Arc Ultra features an all-new acoustic architecture with three more drivers than Arc, groundbreaking Sound Motion technology, updated touch controls, Bluetooth connectivity, more advanced voice enhancement, Trueplay tuning for Android and a sleeker, more modern design.
HDMI eARC
The Arc is equipped with HDMI eARC, which allows you to transmit the Dolby Atmos signal via the HDMI cable and get a 3D surround effect. In addition, with eARC you can control the volume of the ARC with the TV remote control.
Multiroom audio
Easily expand the sound system. You can connect more Sonos speakers wirelessly and play the sound in multiple rooms.
Voice control
The Arc Ultra is equipped with a microphone, which allows you to operate the soundbar directly via voice. Sonos is compatible with Amazon Alexa. You can play music, set your alarm, control other smart devices or start your scenes.True play
Trueplay is a unique technology from Sonos. You can optimize the sound with an iOS or Android device, such as a tablet or iPhone.
Works with various home automation systemsThe Sonos system is easy to integrate with various home automation systems. This allows you to record starts and stops of the music in the automation.Streaming services
Sonos supports several streaming services, including Spotify, Deezer, Tidal and Napster.
Sonos App
With the Sonos app you can control all your favorite music via iOS and Android. This applies to PC, Mac, NAS, internet radio and streaming services.
Features
• Impressively improved surround effect with Dolby Atmos.
• Easy installation via Sonos App and eArc.
• Combine with Sonos Era 100/300 & Sonos Sub for ultimate home theater experience• Easily expand the sound system into a multi-room setup
• Can be integrated with various home automation systems, including FIBARO, Homey, SmartThings
• Compatible with Amazon Alexa
• Equipped with microphones for direct control of the voice assistant
• Trueplay space correction via iOS and Android devices
• Local touch buttons for basic functions (play, pause, skip etc.)
• Available in white or black
• Suitable for a hanging system (available separately)
The Sonos Arc Ultra brings your entertainment to life. Experience deeper bass and more detailed sound. All this in a sleek modern design, made possible by the groundbreaking Motion™ technology.
Install the Arc Ultra with the included HDMI cable and enjoy easy control with the TV remote control. You can also use the Sonos app, the controls on top of the soundbar or with Sonos Voice Control and Amazon Alexa.
Easily stream your music via WiFi and Bluetooth. Add a Sonos Sub or Era speakers for the ultimate Dolby Atmos surround sound experience.Sonos Arc Ultra vs Sonos Arc
Arc Ultra features an all-new acoustic architecture with three more drivers than Arc, groundbreaking Sound Motion technology, updated touch controls, Bluetooth connectivity, more advanced voice enhancement, Trueplay tuning for Android and a sleeker, more modern design.
HDMI eARC
The Arc is equipped with HDMI eARC, which allows you to transmit the Dolby Atmos signal via the HDMI cable and get a 3D surround effect. In addition, with eARC you can control the volume of the ARC with the TV remote control.
Multiroom audio
Easily expand the sound system. You can connect more Sonos speakers wirelessly and play the sound in multiple rooms.
Voice control
The Arc Ultra is equipped with a microphone, which allows you to operate the soundbar directly via voice. Sonos is compatible with Amazon Alexa. You can play music, set your alarm, control other smart devices or start your scenes.True play
Trueplay is a unique technology from Sonos. You can optimize the sound with an iOS or Android device, such as a tablet or iPhone.
Works with various home automation systemsThe Sonos system is easy to integrate with various home automation systems. This allows you to record starts and stops of the music in the automation.Streaming services
Sonos supports several streaming services, including Spotify, Deezer, Tidal and Napster.
Sonos App
With the Sonos app you can control all your favorite music via iOS and Android. This applies to PC, Mac, NAS, internet radio and streaming services.
Features
• Impressively improved surround effect with Dolby Atmos.
• Easy installation via Sonos App and eArc.
• Combine with Sonos Era 100/300 & Sonos Sub for ultimate home theater experience• Easily expand the sound system into a multi-room setup
• Can be integrated with various home automation systems, including FIBARO, Homey, SmartThings
• Compatible with Amazon Alexa
• Equipped with microphones for direct control of the voice assistant
• Trueplay space correction via iOS and Android devices
• Local touch buttons for basic functions (play, pause, skip etc.)
• Available in white or black
• Suitable for a hanging system (available separately)
The Sonos Beam is the compact soundbar for good sound and many smart functions. The soundbar has Dolby Atmos, so you get an impressive 3D sound. The Sonos Beam has a modern and compact design (only 65.1 cm wide), so the soundbar does not block the view of the TV and does not protrude over the edge of your TV furniture. The Sonos Beam can be expanded to a 5.1 setup with wireless rear speakers and subwoofer from Sonos.HDMI eARC
The Beam is equipped with HDMI eARC, with which you can transmit the Dolby Atmos signal via the HDMI cable and you get a 3D surround effect. In addition, with eARC you can control the volume of the ARC with the TV remote control.
Multiroom audio
Easily expand the sound system. You can connect more Sonos speakers wirelessly and play the sound in multiple rooms.
Voice Control
Sonos is compatible with Google Assistant and Amazon Alexa.
Trueplay
Trueplay is a unique technology from Sonos. You can optimize the sound with an iPhone or iPad.
Works with FIBARO, Homey & SmartThings
The Sonos system is easy to integrate with various home automation systems. This allows you to start and stop recording music in the automation.
Streaming Services
Sonos supports several streaming services, including Spotify, Deezer, Tidal and Napster.
Sonos App
With the Sonos app you can control all your favorite music via iOS and Android. This applies to PC, Mac, NAS, internet radio and streaming services.
Features
Impressive 3D surround effect
Easy setup via Sonos App
Combine Sonos One (SL) & Sonos Sub for the ultimate home theater experience
Easily expand the sound system to a multi-room setup
Can be integrated with various home automation systems, including FIBARO, Homey, SmartThings
Compatible with Google Assistant and Amazon Alexa
Features microphones for direct voice assistant control
Trueplay space correction via iOS devices
Local touch buttons for basic functions (play, pause, skip etc.)
Available in white or black
Suitable for a suspension system (sold separately)
The Sonos Beam is the compact soundbar for good sound and many smart functions. The soundbar has Dolby Atmos, so you get an impressive 3D sound. The Sonos Beam has a modern and compact design (only 65.1 cm wide), so the soundbar does not block the view of the TV and does not protrude over the edge of your TV furniture. The Sonos Beam can be expanded to a 5.1 setup with wireless rear speakers and subwoofer from Sonos.HDMI eARC
The Beam is equipped with HDMI eARC, with which you can transmit the Dolby Atmos signal via the HDMI cable and you get a 3D surround effect. In addition, with eARC you can control the volume of the ARC with the TV remote control.
Multiroom audio
Easily expand the sound system. You can connect more Sonos speakers wirelessly and play the sound in multiple rooms.
Voice Control
Sonos is compatible with Google Assistant and Amazon Alexa.
Trueplay
Trueplay is a unique technology from Sonos. You can optimize the sound with an iPhone or iPad.
Works with FIBARO, Homey & SmartThings
The Sonos system is easy to integrate with various home automation systems. This allows you to start and stop recording music in the automation.
Streaming Services
Sonos supports several streaming services, including Spotify, Deezer, Tidal and Napster.
Sonos App
With the Sonos app you can control all your favorite music via iOS and Android. This applies to PC, Mac, NAS, internet radio and streaming services.
Features
Impressive 3D surround effect
Easy setup via Sonos App
Combine Sonos One (SL) & Sonos Sub for the ultimate home theater experience
Easily expand the sound system to a multi-room setup
Can be integrated with various home automation systems, including FIBARO, Homey, SmartThings
Compatible with Google Assistant and Amazon Alexa
Features microphones for direct voice assistant control
Trueplay space correction via iOS devices
Local touch buttons for basic functions (play, pause, skip etc.)
Available in white or black
Suitable for a suspension system (sold separately)
The Sonos Era 100 SL is a compact wireless speaker that delivers powerful stereo sound within the Sonos ecosystem. Thanks to the redesigned acoustic architecture with two angled tweeters and a larger midwoofer, the speaker fills the room with clear sound and deep bass.
The Sonos Era 100 SL is based on the Sonos Era 100 but without built-in microphones. This makes the speaker suitable for applications where voice control is not desired, such as commercial environments or installations where privacy plays an important role.
The speaker operates fully within the Sonos platform and can easily be integrated into an existing multiroom system. Music can be streamed wirelessly via WiFi or Apple AirPlay 2. Using the Sonos app, the speaker can be configured, grouped with other rooms and controlled from a smartphone, tablet or computer.
Works with FIBARO, Homey & SmartThings
The Sonos system can easily be integrated with various home automation systems. This allows starting and stopping music to be included in automations within the smart home system.
In addition to use as a standalone speaker, the Sonos Era 100 SL can also be used as a stereo pair or as a surround speaker in combination with a Sonos soundbar, such as the Sonos Arc or Sonos Beam. This makes the speaker a flexible building block within both music and home cinema installations.
Features
Compact wireless speaker with stereo sound
Two tweeters for clear channel separation
Larger midwoofer for deeper bass
Operates via WiFi within the Sonos ecosystem
Support for Apple AirPlay 2
No built-in microphones or voice control
Suitable for stereo pairing or surround setups
Integration with FIBARO, Homey and SmartThings
Control via the Sonos app
USB-C connection for optional line-in adapter
The Sonos Era 100 SL is a compact wireless speaker that delivers powerful stereo sound within the Sonos ecosystem. Thanks to the redesigned acoustic architecture with two angled tweeters and a larger midwoofer, the speaker fills the room with clear sound and deep bass.
The Sonos Era 100 SL is based on the Sonos Era 100 but without built-in microphones. This makes the speaker suitable for applications where voice control is not desired, such as commercial environments or installations where privacy plays an important role.
The speaker operates fully within the Sonos platform and can easily be integrated into an existing multiroom system. Music can be streamed wirelessly via WiFi or Apple AirPlay 2. Using the Sonos app, the speaker can be configured, grouped with other rooms and controlled from a smartphone, tablet or computer.
Works with FIBARO, Homey & SmartThings
The Sonos system can easily be integrated with various home automation systems. This allows starting and stopping music to be included in automations within the smart home system.
In addition to use as a standalone speaker, the Sonos Era 100 SL can also be used as a stereo pair or as a surround speaker in combination with a Sonos soundbar, such as the Sonos Arc or Sonos Beam. This makes the speaker a flexible building block within both music and home cinema installations.
Features
Compact wireless speaker with stereo sound
Two tweeters for clear channel separation
Larger midwoofer for deeper bass
Operates via WiFi within the Sonos ecosystem
Support for Apple AirPlay 2
No built-in microphones or voice control
Suitable for stereo pairing or surround setups
Integration with FIBARO, Homey and SmartThings
Control via the Sonos app
USB-C connection for optional line-in adapter
The Sonos Era 300 is the revolutionary Sonos stereo speaker with Dolby Atmos. The loudspeaker offers a new dimension to spatial audio. With next-level sound from all sides, Era 300 doesn't just surround you. It puts you in the middle of your music. Thanks to the six drivers positioned around the front, sides and top, the Era 300 has support for Dolby Atmos Music. The Era 300 has intuitive touch controls on the top. Start or pause the music with a tap and swipe to easily adjust the volume control. The Sonos Era 300 is moisture resistant and suitable for placement in the bathroom, for example.An acoustic and aesthetic masterpiece
The Era 300's listening experience is extraordinary. The unique design strikes the perfect balance between performance and beauty. Each driver is precisely aimed in a speaker that can be seen.
Play from any service or device
Thanks to the various options, Era 300 offers the best experience to play your favorite music. You can connect a Bluetooth device with one push of a button. You can use the line input to connect a record player, computer, or other sound source.
Touch & Go
The renewed touch control makes operation without the app even easier. Tap or swipe to play, pause, adjust volume, and group speakers.
Voice control “Hey Sonos” & Amazon Alexa
Enjoy optimal privacy and use Sonos Voice Control. Sonos is compatible with Sonos Voice Control and Amazon Alexa. You need another compatible Sonos speaker for Google Assistant.
One-tap privacy & secured with a switch
Deactivate all voice assistants by tapping the speech bubble on top of the speaker. The light also turns off. The microphone can still be used for other functions, including TruePlay. In addition, the microphone can be completely switched off for extra security. You activate this with the switch on the back.
True play
Trueplay is a unique technology from Sonos. With an iPhone or iPad you can optimize the sound. The EQ of the speaker adapts to the unique acoustics of the room.Works with FIBARO, Homey & SmartThings
The Sonos system is easy to integrate with various home automation systems. This allows you to start and stop recording music in the automation.
Streaming services
Sonos supports several streaming services, including Spotify, Deezer, Tidal, and Napster.
Sonos App
With the Sonos app you can control all your favorite music via iOS and Android. This applies to PC, Mac, NAS, internet radio and streaming services.
Attributes
Multiroom stereo speaker
To be used in a damp room
Easy setup via Sonos App
Combine two Era 300s and the Arc for the ultimate surround experience
Easily expand the sound system into a multi-room setup
To be integrated with various home automation systems, including FIBARO, Homey, SmartThings
Compatible with Sonos Voice Control and Amazon Alexa
Equipped with microphones for direct voice assistant control
Privacy options to disable voice assistants and microphones
Trueplay space correction via iOS devices
Local touch and swipe buttons for basic functions (play, pause, volume, group)
Available in white or black
Sonos combo adapter for Ethernet and Aux connection is available separately.
Suitable for suspension system and speaker stands (sold separately)
The Sonos Era 300 is the revolutionary Sonos stereo speaker with Dolby Atmos. The loudspeaker offers a new dimension to spatial audio. With next-level sound from all sides, Era 300 doesn't just surround you. It puts you in the middle of your music. Thanks to the six drivers positioned around the front, sides and top, the Era 300 has support for Dolby Atmos Music. The Era 300 has intuitive touch controls on the top. Start or pause the music with a tap and swipe to easily adjust the volume control. The Sonos Era 300 is moisture resistant and suitable for placement in the bathroom, for example.An acoustic and aesthetic masterpiece
The Era 300's listening experience is extraordinary. The unique design strikes the perfect balance between performance and beauty. Each driver is precisely aimed in a speaker that can be seen.
Play from any service or device
Thanks to the various options, Era 300 offers the best experience to play your favorite music. You can connect a Bluetooth device with one push of a button. You can use the line input to connect a record player, computer, or other sound source.
Touch & Go
The renewed touch control makes operation without the app even easier. Tap or swipe to play, pause, adjust volume, and group speakers.
Voice control “Hey Sonos” & Amazon Alexa
Enjoy optimal privacy and use Sonos Voice Control. Sonos is compatible with Sonos Voice Control and Amazon Alexa. You need another compatible Sonos speaker for Google Assistant.
One-tap privacy & secured with a switch
Deactivate all voice assistants by tapping the speech bubble on top of the speaker. The light also turns off. The microphone can still be used for other functions, including TruePlay. In addition, the microphone can be completely switched off for extra security. You activate this with the switch on the back.
True play
Trueplay is a unique technology from Sonos. With an iPhone or iPad you can optimize the sound. The EQ of the speaker adapts to the unique acoustics of the room.Works with FIBARO, Homey & SmartThings
The Sonos system is easy to integrate with various home automation systems. This allows you to start and stop recording music in the automation.
Streaming services
Sonos supports several streaming services, including Spotify, Deezer, Tidal, and Napster.
Sonos App
With the Sonos app you can control all your favorite music via iOS and Android. This applies to PC, Mac, NAS, internet radio and streaming services.
Attributes
Multiroom stereo speaker
To be used in a damp room
Easy setup via Sonos App
Combine two Era 300s and the Arc for the ultimate surround experience
Easily expand the sound system into a multi-room setup
To be integrated with various home automation systems, including FIBARO, Homey, SmartThings
Compatible with Sonos Voice Control and Amazon Alexa
Equipped with microphones for direct voice assistant control
Privacy options to disable voice assistants and microphones
Trueplay space correction via iOS devices
Local touch and swipe buttons for basic functions (play, pause, volume, group)
Available in white or black
Sonos combo adapter for Ethernet and Aux connection is available separately.
Suitable for suspension system and speaker stands (sold separately)
The Sonos Five is a wireless multi-room speaker with a powerful amplifier and six speakers. This gives the Five the ability to fill a large room with music. Combine two Sonos Five's for stereo sound, or add the Sonos Sub for the ultimate stereo experience. The Sonos Five is suitable for damp rooms, such as a bathroom.
Multi-room audio
Easily expand the sound system. You can connect more Sonos speakers wirelessly and play the sound in multiple rooms.
Voice Control
Sonos is compatible with Google Assistant and Amazon Alexa.
True play
Trueplay is a unique technology from Sonos. You can optimize the sound with an iPhone or iPad.
Works with FIBARO, Homey & SmartThings
The Sonos system is easy to integrate with various home automation systems. This allows you to start and stop recording music in the automation.
Streaming Services
Sonos supports several streaming services, including Spotify, Deezer, Tidal and Napster.
Sonos App
With the Sonos app you can control all your favorite music via iOS and Android. This applies to PC, Mac, NAS, internet radio and streaming services.
Features
Multi-room speaker with a lot of power
To be used in a humid room
Easy setup via Sonos App
Combine two Five's and the Sub for the ultimate stereo experience
Easily expand the sound system to a multi-room setup
Can be integrated with various home automation systems, including FIBARO, Homey, SmartThings
Compatible with Google Assistant and Amazon Alexa
Features microphones for direct voice assistant control
Trueplay space correction via iOS devices
Local touch buttons for basic functions (play, pause, skip etc.)
Available in white or black
Suitable for a suspension system (sold separately)
The Sonos Five is a wireless multi-room speaker with a powerful amplifier and six speakers. This gives the Five the ability to fill a large room with music. Combine two Sonos Five's for stereo sound, or add the Sonos Sub for the ultimate stereo experience. The Sonos Five is suitable for damp rooms, such as a bathroom.
Multi-room audio
Easily expand the sound system. You can connect more Sonos speakers wirelessly and play the sound in multiple rooms.
Voice Control
Sonos is compatible with Google Assistant and Amazon Alexa.
True play
Trueplay is a unique technology from Sonos. You can optimize the sound with an iPhone or iPad.
Works with FIBARO, Homey & SmartThings
The Sonos system is easy to integrate with various home automation systems. This allows you to start and stop recording music in the automation.
Streaming Services
Sonos supports several streaming services, including Spotify, Deezer, Tidal and Napster.
Sonos App
With the Sonos app you can control all your favorite music via iOS and Android. This applies to PC, Mac, NAS, internet radio and streaming services.
Features
Multi-room speaker with a lot of power
To be used in a humid room
Easy setup via Sonos App
Combine two Five's and the Sub for the ultimate stereo experience
Easily expand the sound system to a multi-room setup
Can be integrated with various home automation systems, including FIBARO, Homey, SmartThings
Compatible with Google Assistant and Amazon Alexa
Features microphones for direct voice assistant control
Trueplay space correction via iOS devices
Local touch buttons for basic functions (play, pause, skip etc.)
Available in white or black
Suitable for a suspension system (sold separately)
The Sonos Move 2 is a versatile wireless stereo speaker. With the built-in battery and IP65 rating, the speaker can go anywhere and will continue to play for 22 hours in all weathers. The Move 2 is equipped with WiFi, Bluetooth and there is the option to connect an audio source with the optional Sonos line input adapter via a 3.5mm cable.
FeaturesPortable, powerful solid speaker  ;Stereo soundPerfect for the garden or in the bathroom with IP56 rating Up to 22 hours playing time with the built-in replaceable battery< li>Streaming via Bluetooth, AirPlay2, WiFiUSB-C output for the optional Sonos line-in adapterMove 2 improvementsAdditional tweeter for stereo soundIncreased capacity (replaceable) battery, 8 hours playing time to 22 hours playing time USB-C port through which an optional Sonos line-in adapter can be used to connect a 3.5mm audio source to the Move 2Improved control panel
The Sonos Move 2 is a versatile wireless stereo speaker. With the built-in battery and IP65 rating, the speaker can go anywhere and will continue to play for 22 hours in all weathers. The Move 2 is equipped with WiFi, Bluetooth and there is the option to connect an audio source with the optional Sonos line input adapter via a 3.5mm cable.
FeaturesPortable, powerful solid speaker  ;Stereo soundPerfect for the garden or in the bathroom with IP56 rating Up to 22 hours playing time with the built-in replaceable battery< li>Streaming via Bluetooth, AirPlay2, WiFiUSB-C output for the optional Sonos line-in adapterMove 2 improvementsAdditional tweeter for stereo soundIncreased capacity (replaceable) battery, 8 hours playing time to 22 hours playing time USB-C port through which an optional Sonos line-in adapter can be used to connect a 3.5mm audio source to the Move 2Improved control panel
The Sonos Play is a portable wireless speaker that combines powerful stereo sound with the flexibility of both WiFi and Bluetooth. Thanks to its compact design and durable housing, the speaker can easily be carried and used in different locations, both indoors and outdoors.
The Sonos Play delivers full stereo sound with deep bass in a portable format. With a battery life of up to 24 hours, music can be played for extended periods without recharging. The enclosure is water and dust resistant according to IP67 and designed to withstand bumps and drops, making the Sonos Play suitable for use in a variety of environments.
The Sonos Play can be used via WiFi as part of the Sonos multiroom system or via Bluetooth for direct use with a smartphone or tablet. The speaker also supports Apple AirPlay 2 and an external audio source can be connected via an optional line-in adapter. Control is possible through the Sonos app, the physical buttons on the speaker or via voice control when the speaker is connected via WiFi.
Works with FIBARO, Homey & SmartThings
The Sonos system can easily be integrated with various home automation systems. This allows starting and stopping music to be included in automations within the smart home system.
In addition to use as a standalone speaker, the Sonos Play can also be combined with other Sonos speakers to create an extensive multiroom audio system. Music can be played simultaneously in multiple rooms or controlled individually per room.
Features
Portable wireless speaker with stereo sound
Battery life up to 24 hours
Water and dust resistant design (IP67)
Durable and drop resistant housing
Works via WiFi within the Sonos ecosystem
Bluetooth support for direct playback
Support for Apple AirPlay 2
Voice control via Sonos Voice Control or Alexa
Line-in possible via optional USB-C adapter
Automatic Trueplay sound optimization
Integration with FIBARO, Homey and SmartThings
Control via the Sonos app or physical buttons
The Sonos Play is a portable wireless speaker that combines powerful stereo sound with the flexibility of both WiFi and Bluetooth. Thanks to its compact design and durable housing, the speaker can easily be carried and used in different locations, both indoors and outdoors.
The Sonos Play delivers full stereo sound with deep bass in a portable format. With a battery life of up to 24 hours, music can be played for extended periods without recharging. The enclosure is water and dust resistant according to IP67 and designed to withstand bumps and drops, making the Sonos Play suitable for use in a variety of environments.
The Sonos Play can be used via WiFi as part of the Sonos multiroom system or via Bluetooth for direct use with a smartphone or tablet. The speaker also supports Apple AirPlay 2 and an external audio source can be connected via an optional line-in adapter. Control is possible through the Sonos app, the physical buttons on the speaker or via voice control when the speaker is connected via WiFi.
Works with FIBARO, Homey & SmartThings
The Sonos system can easily be integrated with various home automation systems. This allows starting and stopping music to be included in automations within the smart home system.
In addition to use as a standalone speaker, the Sonos Play can also be combined with other Sonos speakers to create an extensive multiroom audio system. Music can be played simultaneously in multiple rooms or controlled individually per room.
Features
Portable wireless speaker with stereo sound
Battery life up to 24 hours
Water and dust resistant design (IP67)
Durable and drop resistant housing
Works via WiFi within the Sonos ecosystem
Bluetooth support for direct playback
Support for Apple AirPlay 2
Voice control via Sonos Voice Control or Alexa
Line-in possible via optional USB-C adapter
Automatic Trueplay sound optimization
Integration with FIBARO, Homey and SmartThings
Control via the Sonos app or physical buttons
The Sonos Ray is the compact all-in-one soundbar for upgrading your TV, gaming and music experience. The Sonos Ray is easy to set up and operate with the Sonos app. The Sonos app gives you access to your TV, Apple Airplay 2, music services and much more. Experience blockbuster sound with the Sonos Ray, the soundbar is equipped with four D-class digital amplifiers, two powerful tweeters and two centered midwoofers.
The Sonos Ray can be connected to the network via the Ethernet port (10/100 port) or via WiFi (2.4Ghz). The connection to the TV is via an optical port, the cable is supplied as standard. Finally, Sonos Ray has a built-in infrared (IR) receiver, so Ray syncs with the remote for streamlined volume control.
Amplifiers
Four Class D digital amplifiers are matched to the acoustic architecture of the soundbar.
Tweeter
Two powerful tweeters for clear highs. Split waveguides project sound from wall to wall.
Midwoofers
Two centered midwoofers faithfully reproduce mid-range frequencies and solid bass.
Bass Reflex System
Our proprietary low-speed port design minimizes distortion and makes low frequencies sound fuller.
Adjustable EQ
Adjust bass, treble and loudness with the Sonos app.
True play
This software measures the unique acoustics of your room and adjusts your soundbar accordingly. Supported iOS device required.
Speech amplification
Turn on this setting in the Sonos app to boost speech frequencies and make dialogue clearer.
Night sound
Turn on this setting in the Sonos app to decrease the intensity of loud sounds and increase the level of softer sounds.
Apple AirPlay 2
Works with Airplay 2 on Apple devices with iOS 11.4 or later.
Works with FIBARO, Homey & SmartThings
The Sonos system is easy to integrate with various home automation systemssystems. This allows you to start and stop recording music in the automation.
Features
Experience clear, full and balanced sound from the compact soundbar
Clear dialogues thanks to the speech amplification function
Easy operation via Sonos App
Easily expand the sound system to a multi-room or sound system setup
Can be integrated with various home automation systems, including FIBARO, Homey, SmartThings
Compatible with Google Assistant and Amazon Alexa
Trueplay space correction via iOS devices
Local touch buttons for basic functions (play, pause, skip etc.)
Available in white or black
Suitable for a suspension system (sold separately)
The Sonos Ray is the compact all-in-one soundbar for upgrading your TV, gaming and music experience. The Sonos Ray is easy to set up and operate with the Sonos app. The Sonos app gives you access to your TV, Apple Airplay 2, music services and much more. Experience blockbuster sound with the Sonos Ray, the soundbar is equipped with four D-class digital amplifiers, two powerful tweeters and two centered midwoofers.
The Sonos Ray can be connected to the network via the Ethernet port (10/100 port) or via WiFi (2.4Ghz). The connection to the TV is via an optical port, the cable is supplied as standard. Finally, Sonos Ray has a built-in infrared (IR) receiver, so Ray syncs with the remote for streamlined volume control.
Amplifiers
Four Class D digital amplifiers are matched to the acoustic architecture of the soundbar.
Tweeter
Two powerful tweeters for clear highs. Split waveguides project sound from wall to wall.
Midwoofers
Two centered midwoofers faithfully reproduce mid-range frequencies and solid bass.
Bass Reflex System
Our proprietary low-speed port design minimizes distortion and makes low frequencies sound fuller.
Adjustable EQ
Adjust bass, treble and loudness with the Sonos app.
True play
This software measures the unique acoustics of your room and adjusts your soundbar accordingly. Supported iOS device required.
Speech amplification
Turn on this setting in the Sonos app to boost speech frequencies and make dialogue clearer.
Night sound
Turn on this setting in the Sonos app to decrease the intensity of loud sounds and increase the level of softer sounds.
Apple AirPlay 2
Works with Airplay 2 on Apple devices with iOS 11.4 or later.
Works with FIBARO, Homey & SmartThings
The Sonos system is easy to integrate with various home automation systemssystems. This allows you to start and stop recording music in the automation.
Features
Experience clear, full and balanced sound from the compact soundbar
Clear dialogues thanks to the speech amplification function
Easy operation via Sonos App
Easily expand the sound system to a multi-room or sound system setup
Can be integrated with various home automation systems, including FIBARO, Homey, SmartThings
Compatible with Google Assistant and Amazon Alexa
Trueplay space correction via iOS devices
Local touch buttons for basic functions (play, pause, skip etc.)
Available in white or black
Suitable for a suspension system (sold separately)
The Sonos Roam 2 is a portable compact speaker with a built-in battery that lasts up to 10 hours. The Roam 2 is suitable for indoors and outdoors and is dust and waterproof. The mobile speaker is designed to be taken anywhere and has silicone sides. Thanks to the WiFi and Bluetooth functions, the Roam 2 can stream locally via your phone or add it to the other Sonos speakers via WiFi.FeaturesCompact, portable and solid speaker
Dust and waterproof with IP67 ratingUp to 10 hours of playing time with the built-in battery
Streaming via Bluetooth, AirPlay2, WiFi
Built-in microphone for voice control
Charging via USB-C cable (included) or wirelessly with Qi charger or magnetic charger from Sonos
The Sonos Roam 2 is a portable compact speaker with a built-in battery that lasts up to 10 hours. The Roam 2 is suitable for indoors and outdoors and is dust and waterproof. The mobile speaker is designed to be taken anywhere and has silicone sides. Thanks to the WiFi and Bluetooth functions, the Roam 2 can stream locally via your phone or add it to the other Sonos speakers via WiFi.FeaturesCompact, portable and solid speaker
Dust and waterproof with IP67 ratingUp to 10 hours of playing time with the built-in battery
Streaming via Bluetooth, AirPlay2, WiFi
Built-in microphone for voice control
Charging via USB-C cable (included) or wirelessly with Qi charger or magnetic charger from Sonos
The Sonos Sub 4 unlocks the full power of Sonos sound. Pair this subwoofer with your Sonos soundbar or speaker for bass that immerses you deeper in movies, TV and music.
The double force-cancelling woofers eliminate distortions in the sound. Even at loud volumes, you won't experience any buzzing or rattling noises. The iconic design has now been changed to a matte finish and fits into any interior. You can easily install the Sub by connecting the power cable and opening the Sonos app. It can be placed upright or on its side and mounting brackets are available. Combine the Sub with an Arc Ultra or an Arc for deep bass and cinematic sound. The Sub 4 is available in white and black.
Features
Modern design Double woofers for vibration-free sound.
Suitable for a hanging system (available separately).
Can be combined with the: Sonos Arc Ultra, Sonos Arc, Sonos Beam (Gen2), Sonos Beam, Sonos Ray, Sonos Five, Sonos Era 300, Sonos Era 100.
Not compatible with: Sonos One/ One SL.
Available in white or black.
The Sonos Sub 4 unlocks the full power of Sonos sound. Pair this subwoofer with your Sonos soundbar or speaker for bass that immerses you deeper in movies, TV and music.
The double force-cancelling woofers eliminate distortions in the sound. Even at loud volumes, you won't experience any buzzing or rattling noises. The iconic design has now been changed to a matte finish and fits into any interior. You can easily install the Sub by connecting the power cable and opening the Sonos app. It can be placed upright or on its side and mounting brackets are available. Combine the Sub with an Arc Ultra or an Arc for deep bass and cinematic sound. The Sub 4 is available in white and black.
Features
Modern design Double woofers for vibration-free sound.
Suitable for a hanging system (available separately).
Can be combined with the: Sonos Arc Ultra, Sonos Arc, Sonos Beam (Gen2), Sonos Beam, Sonos Ray, Sonos Five, Sonos Era 300, Sonos Era 100.
Not compatible with: Sonos One/ One SL.
Available in white or black.
The Sonos Sub Mini is the powerful compact subwoofer with big bass. Give a boost to the listening experience with TV, music, games with extra bass. Combine the Sonos Sub Mini with Beam, Ray, One or One SL and provide a home cinema with surprisingly rich, clear and balanced low frequencies. The Sub Mini's wireless 5 GHz WiFi connection increases the transmission speed of the sound and ensures high-quality sound that is perfectly synchronized with the TV. The Sonos Sub Mini connects to the network via a 2.4 GHz, 5 GHz or Ethernet connection.
Enjoy stereo sound
Pair the Sonos Sub Mini with the One or One SL for a more spacious sound. The Sub Mini can stereo pair with an amplified, non-portable Sonos product via the Sonos App. Sub Mini is recommended for the Beam*, Ray, One*, One SL or any IKEA SYMFONISK speaker. Sub Mini is also recommended for smaller bookshelf speakers boosted by Amp.
*Sub Mini can be paired with all generations.
Powerful surround sound
Create a Home theater setup by combining the Sub Mini with the Beam or Ray soundbars and two One's or One SL's.
Mix and match
Mix and match speakers to create your own perfect system. Listen anywhere in the house and adjust the system whenever you want.
No buzzing or vibrating
In the acoustically sealed housing, two special woofers generate the full and rich low frequencies of a much larger subwoofer. The woofers face inward to provide a powerful canceling effect that neutralizes distortion.
Quick and easy to install
Plug in the plug and open the Sonos app to wirelessly connect your soundbar or speaker and adjust the bass level. The volume changes automatically with the connected product.
Better bass for your space
The Trueplay™ tuning technology adapts the bass to the acoustics of the room so that it doesn't sound too loud, hum or flat. Even if you place Sub Mini next to a wall.
*Supported iOS device required.
Features
Wireless Compact Subwoofer
Support for Trueplay tuning technology
Recommended to combine with Beam, Ray, One or One SL
Available in matte white or matte black
The Sonos Sub Mini is the powerful compact subwoofer with big bass. Give a boost to the listening experience with TV, music, games with extra bass. Combine the Sonos Sub Mini with Beam, Ray, One or One SL and provide a home cinema with surprisingly rich, clear and balanced low frequencies. The Sub Mini's wireless 5 GHz WiFi connection increases the transmission speed of the sound and ensures high-quality sound that is perfectly synchronized with the TV. The Sonos Sub Mini connects to the network via a 2.4 GHz, 5 GHz or Ethernet connection.
Enjoy stereo sound
Pair the Sonos Sub Mini with the One or One SL for a more spacious sound. The Sub Mini can stereo pair with an amplified, non-portable Sonos product via the Sonos App. Sub Mini is recommended for the Beam*, Ray, One*, One SL or any IKEA SYMFONISK speaker. Sub Mini is also recommended for smaller bookshelf speakers boosted by Amp.
*Sub Mini can be paired with all generations.
Powerful surround sound
Create a Home theater setup by combining the Sub Mini with the Beam or Ray soundbars and two One's or One SL's.
Mix and match
Mix and match speakers to create your own perfect system. Listen anywhere in the house and adjust the system whenever you want.
No buzzing or vibrating
In the acoustically sealed housing, two special woofers generate the full and rich low frequencies of a much larger subwoofer. The woofers face inward to provide a powerful canceling effect that neutralizes distortion.
Quick and easy to install
Plug in the plug and open the Sonos app to wirelessly connect your soundbar or speaker and adjust the bass level. The volume changes automatically with the connected product.
Better bass for your space
The Trueplay™ tuning technology adapts the bass to the acoustics of the room so that it doesn't sound too loud, hum or flat. Even if you place Sub Mini next to a wall.
*Supported iOS device required.
Features
Wireless Compact Subwoofer
Support for Trueplay tuning technology
Recommended to combine with Beam, Ray, One or One SL
Available in matte white or matte black
* De Sonos-korting is zichtbaar in de winkelmand wanneer je bent ingelogd met je geautoriseerde account.
Nog geen geautoriseerd Sonos installateur?
Word geautoriseerd Sonos installateur en koop Sonos in tegen zakelijke inkoopcondities. Je krijgt bovendien toegang tot de Sonos Academy en digitale marketingmaterialen, en wij helpen je met advies over complete multiroom-oplossingen.
The Nice Roll-Control 2 is designed for controlling and precisely positioning AC-powered motors, including roller shutters, blinds, awnings, screens and gates. The Roll-Control 2 is equipped with a Z-Wave 800 chip. This makes the module much more energy-efficient in standby mode and provides a longer range, resulting in a more stable mesh network.The module supports motors without a built-in driver but with mechanical or electronic limit settings. This is the main difference compared to the Nice Roll-Control.Nice has developed a new inclusion procedure for integration with the Home Center 3, allowing you to select the correct settings right away.
Features
Z-Wave 800Compatible with AC motors with electronic or mechanical limit settings
Measures active energy consumption
Works with various types of switches, including push-buttons and toggle switches
Supports motors for opening, closing and tiltingNot compatible with motors with a built-in driver
BiDi-ZWave is a plug & play module designed for the integration of Nice Control Units through the IBT4 connector. It allows for easy integration with the FIBARO System. Thanks to the integration it is possible to control the position, check status and read diagnostic information.FeaturesCompatible with FIBARO Home CentersIntelligent algorithm automatically recognizes protocol and motor typeWorks with several Nice Control Units from last 10 years Uses the latest generation Z-Wave chip (700)
The Nice Clima-Control is the ideal solution for efficient and intuitive control of your air conditioning and heating system. This versatile device combines advanced technology with a user-friendly interface, allowing you to effortlessly adjust the temperature in your home to your preferences.
With the built-in infrared transmitter, you can easily control existing air conditioning units. Using the available app, you can teach the Clima-Control the correct infrared codes.
The Nice Clima-Control connects to your smart home via Z-Wave 800 and can both heat and cool. For heating, it can control a Z-Wave relay via association.
With the built-in battery and included bracket, the Nice Clima-Control can be placed anywhere.
Features
Compatible with Nice Yubii smart home
Infrared control of air conditioning devices
Heat / Cool mode
Z-Wave 800
Rechargeable battery
USB-C 5V 2A
The Nice CO Alarm-Control is a compact carbon monoxide detector. Thanks to its stylish design, the CO Sensor can be mounted on the wall at the ideal height. Due to its high sensitivity, the sensor detects carbon monoxide (CO) gas at a minimum quantity. An alarm is signaled by the built-in siren, flashing LED and by sending Z-Wave commands. FeaturesCan be used as a stand-alone carbon monoxide detector without intelligent functionsMounting to the wallBattery poweredCompletely wirelessAcoustic signal and LED indicatorBuilt-in temperature sensor.
The Nice Dimmer-Control has been developed for controlling different types of light sources. The Dimmer-Control supports two types of lighting dimming techniques, including trailing edge and leading edge. Thanks to the intelligent calibration, this is automatically detected. The Dimmer-Control can be used in 2- and 3-wire installations. The module measures the active power consumption of the connected lighting as standard.
This product is intended for connection to FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The device can be operated and automated via the Z-Wave network.
Features
Soft-start function
Built-in active power and energy measurement function
Intelligent light source detection via automatic calibration
Works with various types of switches, including pulse, toggle and toggle switch
The NICE Domi Climatic (WSC) is a stylish and wireless climate sensor for measuring light intensity (LUX), wind speed (m/s) and temperature (ºC).
This climate sensor has its own solar cell that provides the required energy. This makes the installation location more flexible because no power wires need to be installed.
The sensor is splash-proof (IP55) and made of weather-resistant materials, so it can be hung outside on the facade of a building. The sensor part is adjustable relative to the mounting base, allowing mounting on sloping or overhanging surfaces.
The Nice Domi Climatic uses the Nice BiDi protocol (on 433Mhz) and can therefore be linked to the Nice-FIBARO gateways with the Nice BiDi protocol.
Measured values:
Light intensity 0 - 83000 LUX
Wind speed 10 – 120 km/h
Temperature -20 to 60 ºC
Practical applications:
By connecting this Nice Dome Climatic sensor to a Nice-FIBARO gateway, several new and interesting usage options are created, such as:
Outdoor light measurement, this can be used to determine whether it is dim/dark, followed by starting specific atmospheric scenes.
Wind speed measurement, for closing skylights, retrieving drop-down awnings or sending interactive push messages to users.
Outside temperature measurement, in combination with the measured lux value, can be used to determine whether the awning can be lowered, if the wind is not too strong, of course, so that the inside temperature does not rises too high.
NOTE: The transmission range of the Nice BiDi protocol is more limited than Z-Wave. Place this climate sensor as close as possible to the Nice-FIBARO gateway and test the range before final installation.
Features
• Stylish outdoor sensor
• Wind speed, light intensity and temperature measurement
• Autonomous energy supply by solar cell
• Nice BiDi communication protocol
• Can also be directly connected to Nice sun protection motors
The NICE Domi Climatic (WSR) is a stylish and wireless climate sensor for measuring the outdoor light intensity (LUX) and wind speed (m/s) and whether there is rain (on/off)This climate sensor is supplied with 230V.
The sensor is splash-proof (IP55) and made of weather-resistant materials, so it can be hung outside on the facade of a building. The sensor part is adjustable relative to the mounting base, allowing mounting on sloping or overhanging surfaces.
The Nice Domi Climatic uses the Nice BiDi protocol (on 433Mhz) and can therefore be linked to the Nice-FIBARO gateways with the Nice BiDi protocol.
Measured values:
Light intensity 0 - 83000 LUX
Wind speed 10 – 120 km/hRain on/offPractical applications:By connecting this Nice Dome Climatic sensor to a Nice -FIBARO gateway creates several new and interesting usage options, such as:
Outdoor light measurement, this can be used to determine whether it is dim/dark, followed by starting specific atmospheric scenes.
Wind speed measurement, for closing skylights, retrieving drop-down awnings or sending interactive push messages to users.Rain,< /b> for closing skylights, retrieving drop-down awnings or sending interactive push messages to users.NOTE: The transmission range of the Nice BiDi protocol is more limited than Z-Wave. Place this climate sensor as close as possible to the Nice-FIBARO gateway and test the range before final installation.
Features
• Stylish outdoor sensor
• Wind speed and light intensity measurement
• 230 Volt• Nice BiDi communication protocol
• Can also be directly connected to Nice sun protection motors
The Nice D/W-Control is a wireless battery-powered magnetic contact sensor. The trigger is detected by separating the sensor and the magnet. The sensor is equipped with a built-in temperature sensor and tamper protection.
This product is intended for control and automation with FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The sensor triggers can be used for automation via the Z-Wave network.
Features
Works on a battery
Built-in temperature sensor
Sensor for mounting on doors and windows
Detection for tampering when removing or opening
Visual LED indicator for device status
The Nice D/W-Control is a wireless battery-powered magnetic contact sensor. The trigger is detected by separating the sensor and the magnet. The sensor is equipped with a built-in temperature sensor and tamper protection.
This product is intended for control and automation with FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The sensor triggers can be used for automation via the Z-Wave network.
Features
Works on a battery
Built-in temperature sensor
Sensor for mounting on doors and windows
Detection for tampering when removing or opening
Visual LED indicator for device status
The Nice D/W-Control is a wireless battery-powered magnetic contact sensor. The trigger is detected by separating the sensor and the magnet. The sensor is equipped with a built-in temperature sensor and tamper protection.
This product is intended for control and automation with FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The sensor triggers can be used for automation via the Z-Wave network.
Features
Works on a battery
Built-in temperature sensor
Sensor for mounting on doors and windows
Detection for tampering when removing or opening
Visual LED indicator for device status
The Nice DoubleDimmer-Control is a dual-channel module designed to adjust the light intensity of two separate lighting circuits. The module can operate as a dimmer or switch in three-wire systems and supports LED loads up to 2 x 70 W or 1 x 140 W when outputs are linked. The DoubleDimmer-Control is part of the Z-Wave 800 series and offers extended range, improved security, and lower power consumption. With automatic switch-type detection, manual calibration, and simplified configuration, installation is quick and easy. The module features power metering, protection against overheating, overload, and voltage drop, and is compatible with Yubii Home, Home Center 3, and Home Center 3 Lite. Features Two independent dimming channels (2 x 70 W LED or 1 x 140 W combined) Operates via Z-Wave 800 series – extended range and higher security Automatic detection of connected switch type Manual calibration for precise dimming adjustment Adjustable favorite light level per channel Real-time measurement of voltage, current, and energy consumption Protection against overheating, overload, and voltage drop Easy installation with spring terminals Compatible with Yubii Home, Home Center 3, and Home Center 3 Lite Dimensions: 45 × 37 × 20 mm
The Nice DoubleSmart-Control is an innovative solution for controlling two devices in your smart home. Designed with ease of use and versatility in mind: you can power the module with 100–240 V AC or with 24–30 V DC and use the potential-free relays to switch two different devices or circuits, including low voltage.
With support for Z-Wave 500, the DoubleSmart-Control offers improved performance, greater range and reliable communication. Thanks to its compact design and straightforward installation, the module integrates effortlessly into existing systems. Ideal for both new installations and upgrades of existing setups.
Features:
Dual device control: Controls two independent devices or circuits.
Potential-free relays: Switch 100–240 V AC as well as 24–30 V DC, for example for zone valves, boilers, garage doors or irrigation.
Flexible power supply: 100–240 V AC, 50/60 Hz or 24–30 V DC. A neutral conductor is required for mains supply.
Maximum load: 6 A per channel, 9.5 A total, for resistive and incandescent loads.
Z-Wave 500 compatibility: Increased reliability and improved network performance, works as a repeater.
Compact design: Suitable for installation in standard wall boxes.
The Nice Fan4-Control offers smart and precise control of your air-based heating system with 2 valves for heating and cooling, ensuring optimal comfort in your home. This innovative device combines ease of use with advanced technology for efficient heating regulation.
With convenient features such as control via Yubii Home and programmable schedules, you have full control over your heating and cooling, no matter where you are. The Fan4-Control integrates seamlessly into any smart home and provides flexibility for your specific needs.
Connection to your smart home is via Z-Wave.
Features
Smart control: Easily set the desired temperature via the screen.
Energy efficient: Save energy with smart heating schedules and automatic optimization.
Compatible with Yubii Home
Z-Wave
Heat / Cool mode
Fan speed (4 levels, 3 speeds)
Compatible with smart home: Support for various platforms.
The Nice Flood-Control is a multifunctional sensor and more than just a wireless water detector. The device detects the smallest floods and has a built-in temperature sensor. Water detection is signaled by the integrated LED and the acoustic alarm.
This product is intended for control and automation with FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The sensor triggers can be used for automation via the Z-Wave network.
Features
Detects flooding and leakage
Built-in LED and audible alarm
Compact and modern design
Works on a battery, or on a DC power supply
Floor or wall mounting with extended (wired) sensor probe
The Nice Heat-Control is a smart radiator thermostat knob with a built-in temperature sensor. The heat level is automatically controlled by the set schedules. Thanks to an innovative room analysis algorithm, the Heat-Control calculates the time it takes to reach the desired temperature based on room volume. Heat-Control can be adjusted manually at any time via the app and voice command. The Heat-Control has a built-in temperature sensor and can be connected to the separately available external temperature sensor.
This product is intended for connection to FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The device can be operated and automated via the Z-Wave network.
Features
Suitable for thermostatic valves: M30 x 1.5, Danfoss RTD-N and Danfoss RA-N
Easy to install without tools
Built-in battery and rechargeable via standard micro-USB port*
Visual LED ring for temperature display
Frost protection and descaling function
*No external USB power supply and cable included
*No external temperature sensor included
The Nice Heat-Control Kit contains the smart radiator thermostat knob and external temperature sensor. The external temperature sensor serves as a reference point for the Heat-Control. The heat level is automatically controlled by the set schedules. Thanks to an innovative room analysis algorithm, the Heat-Control calculates the time it takes to reach the desired temperature based on room volume. Heat-Control can be adjusted manually, via the app and voice command at any time.
This product is intended for connection to FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The device can be operated and automated via the Z-Wave network.
Features
Suitable for thermostatic valves: M30 x 1.5, Danfoss RTD-N and Danfoss RA-N
Easy to install without tools
Built-in battery and rechargeable via standard micro-USB port*
Visual LED ring for temperature display
Frost protection and descaling function
*No external USB power supply and cable included
The Nice HighLoad-Control is a compact flush-mounted module for switching a single electrical load of up to 16 A (3680 W at 230 V). The module is powered by 230 V AC, 50 Hz and is designed for resistive loads, such as electric underfloor heating, electric radiators and electric water heaters. It can be operated via the Z-Wave network or a connected momentary or toggle switch.
In addition to switching devices, the HighLoad-Control offers two thermostat modes. With an external NTC temperature sensor, the module can control heating based on the measured temperature. Temperature control via the Z-Wave controller is also possible, with the NTC sensor acting as an additional temperature input, for example to monitor the floor temperature. This allows you to use the same module for switching electrical devices and controlling electric heating.
The HighLoad-Control is equipped with a Z-Wave 800 chip and measures the active power and energy consumption of the connected device. The module also supports mains voltage measurement.
Features
Power supply 230 V AC / 50 Hz; switches a single resistive load of up to 16 A / 3680 W
Three operating modes: switch, thermostat with NTC sensor and thermostat with temperature control via the Z-Wave controller
Suitable for applications including electric underfloor heating, electric radiators and electric water heaters
Measures active power (W), energy consumption (kWh) and mains voltage (V)
Z-Wave 800 with support for S2 security and repeater functionality
Works with momentary and toggle switches
Configurable auto-off timer in switch mode
Built-in protection against overcurrent and internal overheating
Compact design measuring 45 × 36 × 23 mm; flush box at least 60 mm deep
A live and neutral wire are required for installation
Please note: The thermostat functions require an external NTC temperature sensor; it is not included. The NTC input is connected to mains voltage; treat the sensor and its wiring as live conductors. Temperature control via the controller also requires inclusion in a Z-Wave network. Mains voltage reporting is disabled by default and can be enabled in the settings.
The Nice HubPowerbank is a mobile WiFi access point with a built-in LTE / 3G modem and USB powerbank. The HubPowerbank is a complementary device for the FIBARO Home Center 3 Lite. The HubPowerbank makes it possible to connect the HC3L to a backup power supply. In addition, the installation of a SIM card provides an extra/emergency internet connection.
By default, the Home Center 3 Lite will use the main power source and main WiFi. In the event of a power failure, the HubPowerbank automatically switches on to the emergency source and the device can provide power and internet for up to 12 hours.
The combination of the Home Center 3 Lite and the HubPowerbank ensures that you always have access to the installation in the event of a power failure, internet failure or if there is no internet available yet. Think of new homes, environments with a security solution, wireless thermostatic valves and smoke detectors.
Features
Power bank with Wi-Fi access point
Display with LED indicators for status indication
Battery saving mechanism
Can connect up to 10 devices simultaneously
Mobile connection via 3G and LTE
5,000 mAh capacity, up to 12 hours of power and internet supply for the hub.
Micro SDHC slot with 2—32GB capacity
The Nice Motion-Control is an advanced compact multi-sensor. The eye-shaped design makes the Motion Sensor easy to mount on any surface. The Motion Sensor has a built-in motion sensor, temperature sensor, light sensor and accelerometer. When detecting motion or an alarm, the eye provides a visual color representation of the user-defined color or temperature. To prevent false alarms, the sensitivity can be adjusted to personal preference. The sensor is completely wireless and runs on a battery.A mounting bracket for mounting in a hollow wall or ceiling is available separately.FeaturesTemperature , alarm and motion detection are displayed via the LED indicatorDetects movement, measures temperature and light intensityUse the Motion Sensor to make the environment safer Measures the temperature in each room Battery-powered multi-sensorTamper protectionCustomizable sensitivity level
Complete video intercom kit with single-button outdoor station, indoor monitor and power supply. Suitable for residential and small apartment buildings. Can be used with existing 2-wire cabling. Directly connects to the Nice Yubii Home app for integration of intercom and smart home in a single app.
Note: the outdoor unit connects to the network via the indoor monitor.
This set includes:
Outdoor station (MB2-W1BSTAT)
2 MP camera, resolution 1080p
Viewing angle: 123° horizontal, 69° vertical
Built-in microphone and speaker
Night vision with white LED
RFID reader (13.56 MHz)
Relay output for door opener
Protection rating: IP65
Supports triggering webhook scenes/devices via e.g. Nice/FIBARO
Indoor monitor (MB2-WMONIT)
7" touchscreen LCD display, resolution 800x480 px
Network via Ethernet and Wi-Fi
Supports 2-wire connection
Built-in relay 1x
Not compatible with the Yubii Home app.
Power supply (MB2-WPOWER)24 V DCSuitable for powering the 2-wire system
Outdoor station with single push button, suitable for use within the Nice MyBell 2-wire system. The unit features a built-in camera, RFID reader and relay output for door release. Equipped with night vision (white LED) and suitable for wall mounting. Does not connect directly to the network, but receives both power and internet via the connected indoor monitor. Can trigger webhook scenes or devices within smart home systems such as Nice and FIBARO.
Key features:
Camera: 2 MP, resolution 1080p
Viewing angle: 123° horizontal, 69° vertical
Audio: built-in microphone and speaker
Night vision: white LED lighting
RFID reader: 13.56 MHz
Relay output: 1
Protection rating: IP65
Mounting: surface (wall)
Network: via indoor monitor (no direct connection)
Smart home integration: supports triggering webhook scenes/devices
Power supply unit for the MyBell 2-wire system. Provides a stable 24 V DC to power the indoor monitor, and indirectly the outdoor station.
Key features:
Input: 230 V AC
Output: 24 V DC
Application: power supply for 2-wire system
Installation: surface-mounted
Standard indoor monitor (for expansion) of IP intercom systems. Supports Power over Ethernet (PoE) for combined network and power connection. Features a touchscreen and is suitable for wall mounting.
Key features:
Display: 7" TFT LCD touchscreen
Resolution: 800×480 px
Network: RJ45 (with PoE), Wi-Fi
Power supply: PoE (802.3af) or 12 V DC
Mounting: wall
Functions: two-way audio, alarm notifications, SIP support
External camera support (RTSP)
The Nice On/Off-Control 2 is designed to switch up to two electrical devices. The devices can be controlled remotely via the Z-Wave network and integrated into automated scenes or groups. The module measures the active power and total energy consumption of the connected devices, helping to optimise energy usage.
The On/Off-Control 2 is compatible with Z-Wave and Z-Wave Plus controllers, including FIBARO gateways such as the Home Center 3 and Home Center 3 Lite. The module can be easily installed in standard wall boxes and is configured via the Yubii Home App.
Features
Z-Wave 800 (Z-Wave Plus)Load up to 2 x 80W for LED lightingLoad up to 2 x 5A (total 10A) for resistive loads
Built-in active power and energy metering
Works with various types of switches, including push-button, toggle and rocker switches
Easy installation in standard wall boxes
Requires both phase and neutral wires for operation
The Nice Plug-Control 2 F is a smart plug with built-in energy monitoring for switching and measuring connected electrical devices. With a maximum switching capacity of 12 A (2750 W), it is suitable for a wide range of residential and professional applications. The integrated LED ring provides a visual indication of the current power load and can also be used as a night light or Z-Wave range tester.
The Plug-Control 2 F features the latest Z-Wave 800 chipset. This provides improved wireless range, enhanced communication stability, faster performance and support for SmartStart, making installation and network inclusion faster and easier.
In addition to monitoring energy consumption, the Plug-Control 2 F also supports monitoring energy production from connected microinverters up to 12 A. This makes the device suitable not only for smart automation but also for modern home energy management.
This product is designed for use with Nice/FIBARO gateways, including Home Center 3 and Home Center 3 Lite. It communicates via Z-Wave and can be fully controlled and automated within a Z-Wave network.
Features
Switch and monitor electrical devices up to 12 A (2750 W)
Measures both energy consumption and energy production
Suitable for monitoring connected microinverters
Equipped with the latest Z-Wave 800 chipset
SmartStart support for fast and easy installation
LED ring with load indication, night light and Z-Wave range test
Communicates via the Z-Wave protocol
Type F (Schuko), suitable for the Netherlands and Germany
The Nice Push-Control is a practical wireless scene switch. The switch can be configured as a panic button and scene switch. As a panic button, each press of the button activates the same scene. As a scene switch, Push-Control can activate up to six different actions or scenes. Thanks to its compact design, the Push-Control can be easily placed and mounted on any surface.
This product is intended for operation with FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The triggers of this product can be used for automations via the Z-Wave network.
Features
Works on a battery
Can be placed on any surface
Use as panic button and scene switch
Six actions switch (click and hold one to five times)
The Nice Push-Control is a practical wireless scene switch. The switch can be configured as a panic button and scene switch. As a panic button, each press of the button activates the same scene. As a scene switch, Push-Control can activate up to six different actions or scenes. Thanks to its compact design, the Push-Control can be easily placed and mounted on any surface.
This product is intended for operation with FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The triggers of this product can be used for automations via the Z-Wave network.
Features
Works on a battery
Can be placed on any surface
Use as panic button and scene switch
Six actions switch (click and hold one to five times)
The Nice Push-Control is a practical wireless scene switch. The switch can be configured as a panic button and scene switch. As a panic button, each press of the button activates the same scene. As a scene switch, Push-Control can activate up to six different actions or scenes. Thanks to its compact design, the Push-Control can be easily placed and mounted on any surface.
This product is intended for operation with FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The triggers of this product can be used for automations via the Z-Wave network.
Features
Works on a battery
Can be placed on any surface
Use as panic button and scene switch
Six actions switch (click and hold one to five times)
The Nice RGBW-Control has been developed for the control of one-color LED strips, RGB(W) LED strips and other lighting that is controlled with 12/24V. With the module it is possible to control the light intensity and light color.
This product is intended for connection to FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The device can be operated and automated via the Z-Wave network.
Features
The inputs can be used for 0-10V sensors
Can be used as a dimmer with halogen lighting
Measure the power and energy consumption
All IN and OUT connections are configurable for LED control or 0-10V signal output.
The Nice SingleSmart-Control are designed for operating devices with potential-free contacts. The module can be operated wirelessly via Z-Wave or the switch. The Smart Modules Switch can switch potential-free and DC. The modules are available as a single switch (FGS-214) and as a double switch (FGS-224).Features Control any device via Z-Wave and the switchCan be used with different types of switchesDesigned for switching potential-free contactsThe Double Smart Module has a special parameter for switching entrance gates, garage doors and other motorized products.
The Nice Smart-Control extends the functionality of classic devices and wired sensors. These devices can be integrated into the Z-Wave network with the Smart-Control.
This product is intended for connection to FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The device can be operated and automated via the Z-Wave network.
Features
Integrated temperature sensor
Connect with up to six DS18B20 (temperature) sensors, one DHT (humidity and temperature) sensor, two-wire analog sensors, three-wire analog sensors and two binary sensors.
The Nice Smoke-Control is a compact sensor for detecting smoke at an early stage. The sensor is equipped with an optical sensor, temperature sensor, acoustic alarm and LED indicator. The temperature sensor is configurable via the gateway. The Smoke-Control can be mounted on a wall or ceiling. The LED indicator signals an alarm and the operating mode, for example as a range tester. This shows whether the device is in a Z-Wave network.
The module is intended for control and automation with FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The sensor triggers can be used for automation via the Z-Wave network.
Features
Works on a battery
Optical smoke detector for early fire detection
Integrated temperature sensor for signaling temperature thresholds
Three sensitivity levels of the sensors according to EN 14604:2005 standard
Built-in self-test function – can also be run manually to verify operation
Easy to attach to various surfaces, including ceilings and walls
LED indicator, operating mode, range tester and temperature level
Not suitable for installation near moisture and dust
With the Nice Warm-Control, you bring smart and efficient control of your heating system into your home. This modern device makes it easy to adjust the temperature and optimize your energy consumption while enjoying maximum comfort.
The Warm-Control is designed to seamlessly integrate with your smart home system via Z-Wave 800 to control your water-based underfloor heating system.
The Nice Warm-Control features a relay with an NO/NC output to control a 230V (maximum 5A) pump or valve.
Features
Smart control: Easily set the desired temperature via the screen.
Energy efficient: Save energy with smart heating schedules and automatic optimization.
230V
Maximum 5A relay
Compatible with Yubii Home
Z-Wave 800
Heat mode
The Yubii Home Pro is unique in its class thanks to its support for multiple smart home protocols, including Z-Wave, Zigbee (Beta), and 433 MHz (Nice). In addition to these built-in protocols, the software also enables control of third-party devices via network connection. This allows a wide range of devices and technologies from different manufacturers to connect.
This multi-protocol flexibility makes the Yubii Home Pro a future-proof solution for installers working with various systems and technologies.
Whether you want to automate lighting, security, climate control, or energy management, the Yubii Home Pro enables you to fully meet your customers' needs. Thanks to its powerful built-in processor, the hub offers faster response and better performance, even in complex scenarios with multiple automations.
Features
Multi-protocol support: Compatibility with Z-Wave, Zigbee 3.0, Wi-Fi 2.4 GHz, and 433 MHz devices. This allows you to integrate a wide range of technologies, regardless of brand or standard.
Advanced automations: Configure complex scenarios that respond not only to sensor triggers but also utilize external data such as weather forecasts, schedules, and location-based actions. Ideal for customers with high personalization demands.
Seamless integration: Easily add devices through automatic recognition, minimize configuration time, and ensure compatibility thanks to extensive support for popular smart home products and ecosystems.
User-friendly control: The Yubii app offers basic control for end-users and advanced settings for installers, including an intuitive interface to monitor network status and device performance.
Powerful security: Advanced AES-128 encryption secures all communication within the network, while notifications and camera footage are transmitted in real-time via the hub.
Voice control and interoperability: Full integration with Google Assistant, Amazon Alexa, and Siri enables hands-free operation and increases ease of use for end-users.
With the Yubii Home gateway you can manage and automate smart home devices in one system. Yubii Home is the gateway that connects a wide range of Nice, FIBARO and elero devices into one smart living experience in apartments and houses (up to 100m2). In addition, the hub is open for the integration of devices from other suppliers.Yubii Home supports, in addition to the Z-Wave products, various NICE and elero solutions, such as: - Nice MC424LR10 Gate controller- Nice DPRO924 Rolling door controller- Nice ERA tubular motors (various models)- elero RolTop tubular motors with fixed current and PL2 control (Bi-directional)- elero SunTop tubular motors with fixed current and with PL2 control (Bi-directional)For a complete list of supported NICE and elero products, click here < /div>The Yubii Home gateway also supports an IP camera, 5 plug-ins and is compatible with Z-Wave, 433/868Mhz for NICE/elero products and can be connected to a network via WiFi. With the Yubii Home you automate devices for controlling lighting, heating, blinds, shutters, gates, sun blinds and climate.Not sure if Yubii Home is the right NICE – FIBARO Gateway is for your Smart Home project? Compare the Yubii Home gateway with the other NICE – FIBARO Gateways in this overview or call us on 085 – 760 6162.To be used for:• Up to 40 Nice devices (recommended)• Up to 40 Z-Wave devices (recommended)• 1 IP camera• 20 scenes< div>• 10 Quick Apps• 5 PluginsFeatures• Wireless communication via Z-Wave 700 technology, Nice Flor/Opera/PLN2+ and Elero PLN2• Efficient hardware architecture• Designed for small installations in apartments and houses up to 100m2 • Easy and fast installation• Advanced automations via block scenes, LUA, panels and profiles• Highest level data security• Compatible with voice assistants ( Google Assistant, Amazon Alexa and Siri shortcuts)• Compatible with cloud services such as IFTTT, Facebook Messenger• Integrate Z-Wave devices and other smart IoT devices via the built-in plugins div>• Advanced backup and recovery system
The Shelly Pro Dimmer 1PM is a DIN rail mountable dimmer. The module supports active energy measurement and is designed for dimming 1 light source.
The smart dimmer works with WiFi, LAN and Bluetooth and is therefore compatible with Homey, Smartthings and Home Assistant, among others. Thanks to the WiFi protocol, you can also use it without a hub via the Shelly Smart Home App. You simply place the dimmer in your distribution box on a DIN rail, you can dim 1 light source with a maximum of 200 Watts.
Supported light sources
Light bulb
Dimmable LED and CFL
Dimmable electronic transformers
Features
Open source
ESP32 chip on board
Works stand-alone via LAN or WiFi 2.4 Ghz
Bluetooth for easy pairing
Built-in web server
Access Point and Client Mode
Supported HTTP and/or UDP
Supported mjS scripting
110-240VAC
Maximum 200 wattsLeading edge
Trailing edge
Current measurement
Protected against overload
Protected against overheating
Protected against voltage peaks
Free Android or IOS Shelly Cloud App
Works with MQTT
Easy to install
Built-in distribution box, DIN rail
Scene activation via App
The Shelly Wave Pro Dimmer 1PM is a DIN-rail-mounted dimmer. The module supports active energy measurement and is designed to dim a single light source. The Wave Pro Dimmer 1PM can be operated with 2 switches.
The smart dimmer works with Z-Wave, using a Z-Wave 800 chipset, and is compatible with Homey, Home Center 3, and other platforms such as Home Assistant and SmartThings. You can easily install the dimmer in your fuse box on a DIN rail, allowing you to dim one light source with a maximum of 200 watts.
Note! The dimmer does not yet have full support on the mentioned platforms. Check the current compatibility via the manual link below.
Based on our own tests on the HC3, it seems possible to add the unit after several attempts, resulting in a usable endpoint. Note that the unit needs to be added in Singlechannel mode (see associations) and corrected.
Supported Light Sources
Incandescent bulbs
Dimmable LED and CFL
Dimmable electronic transformers
Features
110-240VAC
Z-Wave 800 chipset
S2 security
Maximum 200 watts (1 channel)
2 switch contacts
Trailing edge
Power measurement
Overload protection
Overheat protection
Surge protection
Fuse box installation, DIN rail
19mm width
Manual
The Shelly 1 Gen3 is a smart switch in a small size with potential-free contacts, allowing electrical devices to be controlled remotely via a mobile phone, tablet, PC, or a home automation system. It can operate independently in a local Wi-Fi network or be controlled via cloud-based home automation services. The device has an improved processor and more memory compared to its predecessor.The Shelly 1 Gen3 can be accessed, controlled, and monitored remotely from any location where the user has internet access, as long as the device is connected to a Wi-Fi router and the internet.The device can be installed in standard mounting boxes, behind sockets and light switches, or in other places with limited space.The Shelly 1 Gen3 has a built-in web interface that allows the device to be monitored, controlled, and settings to be adjusted.FeaturesWi-Fi connectivityIntegration with Smart Home platforms: You can integrate the Shelly 1 Gen3 with popular smart home platforms, including Google, Alexa, and Samsung SmartThings. This enables voice control and automation through these platforms.Local and cloud controlBluetooth connectivityUser-friendly interfaceImproved processor and memoryWireless connectivityDry contact: Allows you to switch low-voltage devices on and off.BLE Gateway: A bridge between your Shelly BLU devices and the broader Shelly ecosystem. It receives Bluetooth signals and sends them to the cloud or locally to another non-Bluetooth device.Wi-Fi extender for IoT devices: A Wi-Fi extender is used to increase the range of your Wi-Fi network by receiving the current Wi-Fi signal, boosting its strength, and then spreading the enhanced signal over a larger area.Scripting: Shelly Scripting Language FeaturesWide integration capabilities: The device can be integrated with third-party home automation systems via a documented HTTP API, MQTT(s), Web Hooks via HTTP and HTTPS, UDP.Virtual components: Virtual Components
The Shelly 1 Gen4 is a compact smart switch with potential-free contacts that allows you to control electrical appliances remotely via your smartphone, tablet, PC or home automation system. The device works both standalone in a local Wi-Fi network and via cloud-based automation services.
This new generation is the improved successor of the Shelly 1 Gen3 and now includes Zigbee connectivity and is Matter certified.
Thanks to its compact design, the Shelly 1 Gen4 fits easily into standard electrical wall boxes, behind sockets or switches – ideal for installation in tight spaces.
The device has a built-in web interface to manage settings and control the device directly. The integrated wireless chip supports multiple protocols (Zigbee, Wi-Fi and Bluetooth), ensuring a stable and secure connection.
Shelly 1 Gen4 is compatible with Matter over Wi-Fi.
Supported load types
Resistive (Ohmic) – Incandescent bulbs, halogen lamps, heating appliances
Capacitive – Electronic equipment with capacitors
Inductive (with RC Snubber) – LED lighting, LED drivers, air conditioners and fans
Note! The inrush current of inductive loads such as LED lighting can damage the relay. Use an RC Snubber to absorb this inrush peak.
Features
Wi-Fi connectivity
Zigbee
Matter (over Wi-Fi)
Bluetooth (for connecting to Shelly devices)
Local and cloud control
Integration with Smart Home platforms: You can integrate the Shelly 1 Gen4 with popular platforms such as Home Assistant and Homey Pro.
Also easy to link with Google Home, Alexa, Apple Home, and Samsung SmartThings, enabling voice control and automation.
User-friendly interface
Relay 1x – Max. 16A at 230V AC or Max. 10A at 30V DC
Dry contact relay
Power supply: 12V DC, 24–48V DC, or 110–240V AC
37x42x16mm
BLE Gateway: Bridge between your Shelly BLU devices and the broader Shelly ecosystem. It receives Bluetooth signals and sends them to the cloud or locally to another non-Bluetooth device.
Wi-Fi range extender for Shelly IoT devices: Expands your Wi-Fi coverage by receiving and amplifying the signal, then redistributing it over a larger area.
Scripting: Shelly Script Language Features
Broad integration options: Integrate with third-party automation systems via documented HTTP API, MQTT(s), Web Hooks via HTTP and HTTPS, UDP.
Virtual Components: Virtual Components
The Shelly EM Mini Gen4 is a compact energy meter that accurately measures the consumption of a single electrical circuit or device. Its small size allows for easy installation behind outlets or inside distribution boxes with limited space. The EM Mini Gen4 supports Wi-Fi, Bluetooth and Zigbee, providing real-time monitoring of voltage, current and power consumption.
With the Gen4 architecture, you benefit from faster communication, enhanced security and lower energy consumption. The module can operate standalone or be integrated into existing smart home systems. Ideal for installers who want to combine energy management and automation within one reliable solution.
Features
Compact design – only 29 × 34 × 16 mm
Measures voltage, current and power (up to 16 A / 3840 W)
Works via Wi-Fi, Bluetooth and Zigbee (Gen4 series)
Real-time energy and power monitoring
Low power consumption (< 1 W)
Supports local control via web interface or MQTT
Integration with automation platforms such as Home Assistant and Shelly Cloud
Easy installation with screw terminals (0.2–2.5 mm²)
Designed for professional energy monitoring and home automation
The Shelly 1L Gen3 is a smart 1-channel switch that works without a neutral wire – perfect for upgrading existing installations. Thanks to support for both Wi-Fi and Bluetooth, the device can easily be added to your smart home system. The relay can be controlled flexibly, making the Shelly 1L Gen3 suitable for a wide range of applications such as switching lights.
The compact size allows the module to fit neatly behind an existing wall switch. Because it doesn't require a neutral wire, the Shelly 1L Gen3 is ideal for renovation projects or situations where only a phase wire is available. The smart switch operates locally and does not require a cloud connection.Features:
Works without a neutral wire (phase-only)
1 relay (up to 4 A)
O1 max. 200 watts
230 volts
For proper operation, the included bypass must be connected to the load on O1
Works via Wi-Fi and Bluetooth
Supports scripting and webhooks
Compatible with Alexa, Google Home, and SmartThings
Can be used standalone or via Shelly Cloud
Supports MQTT, CoAP, and REST API
The Shelly 1PM Gen3 is a smart switch in a small size with power metering, allowing electrical devices to be controlled remotely via a mobile phone, tablet, PC, or a home automation system. It can operate independently in a local Wi-Fi network or be controlled via cloud-based home automation services. The device also has an improved processor and more memory compared to its predecessor.The Shelly 1PM Gen3 can be accessed, controlled, and monitored remotely from any location where the user has internet access, as long as the device is connected to a Wi-Fi router and the internet.The device can be installed in standard mounting boxes, behind sockets and light switches, or in other places with limited space.The Shelly 1PM Gen3 has a built-in web interface that allows the device to be monitored, controlled, and settings to be adjusted.FeaturesWi-Fi connectivityIntegration with Smart Home platforms: You can integrate the Shelly 1PM Gen3 with popular smart home platforms, including Google, Alexa, and Samsung SmartThings. This enables voice control and automation through these platforms.Smart switch with power meteringCompact designRemote control: Provides the ability to control electrical devices remotely via a mobile phone, tablet, PC, or home automation system.Improved processor and memoryWireless connectivityBLE Gateway: A bridge between your Shelly BLU devices and the broader Shelly ecosystem. It receives Bluetooth signals and sends them to the cloud or locally to another non-Bluetooth device.Wi-Fi extender for IoT devicesScripting: Shelly Scripting Language FeaturesWide integration capabilities: The device can be integrated with third-party home automation systems via a documented HTTP API, MQTT(s), Web Hooks via HTTP and HTTPS, UDP.KNX: Supports KNXnet/IP communication.Virtual components: Virtual Components
The Shelly 1PM Gen4 is a compact smart switch with integrated power metering. It allows you to control electrical appliances remotely and monitor energy consumption in real time via your smartphone, tablet, PC or home automation system. The device works standalone in a local Wi-Fi network or through cloud-based automation services.
This new generation is the improved successor to the Shelly 1PM Gen3 and now features Zigbee connectivity and is Matter certified.
Thanks to its small form factor, the Shelly 1PM Gen4 is perfect for installation in standard wall boxes, behind power outlets or switches, and in other tight spaces.
The device has a built-in web interface for adjusting settings, monitoring power usage and direct control. The integrated wireless chip supports multiple protocols (Zigbee, Wi-Fi and Bluetooth) to ensure a stable and secure connection.
Shelly 1PM Gen4 is compatible with Matter over Wi-Fi.
Supported load types
Resistive (Ohmic) – Incandescent bulbs, halogen lamps, heating appliances
Capacitive – Electronic devices with capacitors
Inductive (with RC Snubber) – LED lighting, LED drivers, air conditioners and fans
Note! The inrush current of inductive loads like LED lighting can damage the relay. Use an RC Snubber to absorb the inrush current.
Features
Wi-Fi connectivity
Zigbee
Matter (over Wi-Fi)
Bluetooth (for connecting Shelly devices)
Local and cloud control
Integration with Smart Home platforms: Easily integrate with Home Assistant and Homey Pro
Also compatible with Google Home, Alexa, Apple Home and Samsung SmartThings for voice control and automation
User-friendly interface
Relay 1x – Max. 16A at 230V AC or Max. 10A at 30V DC
Power supply: 24–30V DC or 110–230V AC
Power metering
37x42x16mm
BLE Gateway: Bridge between your Shelly BLU devices and the wider Shelly ecosystem. Receives Bluetooth signals and sends them to the cloud or locally to a non-Bluetooth device
Wi-Fi extender for Shelly IoT devices: Expands your Wi-Fi range by boosting and redistributing your current signal
Scripting: Shelly Scripting Language Features
Broad integration options: Compatible with third-party systems via HTTP API, MQTT(s), Web Hooks (HTTP/HTTPS), UDP
KNX: Supports KNXnet/IP communication
Virtual Components: Virtual Components
The Shelly 1PM Mini Gen4 is an extra compact smart switch with integrated power metering. It allows you to control electrical appliances remotely and monitor real-time energy usage via your smartphone, tablet, PC or home automation system. The device operates independently within a local Wi-Fi network or through cloud-based automation services.
This new generation is the successor to the Shelly 1PM Mini Gen3 and now features Zigbee connectivity and is Matter certified.
Thanks to its small size, the Shelly 1PM Mini Gen4 is ideal for installation in standard wall boxes, behind sockets, switches, or in other tight spaces.
The built-in web interface allows you to manage settings, monitor usage and control the device directly. The integrated wireless chip supports multiple protocols (Zigbee, Wi-Fi and Bluetooth) for a stable and secure connection.
Shelly 1PM Mini Gen4 is compatible with Matter over Wi-Fi.
Supported load types
Resistive (Ohmic) – Incandescent bulbs, halogen lights, heating appliances
Capacitive – Electronic devices with capacitors
Inductive (with RC Snubber) – LED lighting, LED drivers, air conditioners, and fans
Note! The inrush current of inductive loads like LED lighting can damage the relay. Use an RC Snubber to absorb the inrush current.
Features
Wi-Fi connectivity
Zigbee
Matter (over Wi-Fi)
Bluetooth (for connecting to Shelly products)
Local and cloud control
Integration with Smart Home platforms: Integrate Shelly 1PM Mini Gen4 with popular platforms like Home Assistant and Homey Pro
Also easily linkable with Google Home, Alexa, Apple Home, and Samsung SmartThings – enabling voice control and automation
User-friendly interface
Relay 1x – Max. 8A
Power supply: 110–240VAC
29x34x16mm
BLE Gateway: Bridge between your Shelly BLU devices and the broader Shelly ecosystem. Receives Bluetooth signals and forwards them to the cloud or to another local non-Bluetooth device
Wi-Fi extender for Shelly IoT devices: Expands your Wi-Fi coverage by receiving, amplifying, and redistributing the signal
Scripting: Shelly Scripting Language Features
Wide integration options: Compatible with third-party home systems via documented HTTP API, MQTT(s), Web Hooks via HTTP and HTTPS, UDP
KNX: Supports KNXnet/IP communication
Virtual Components: Virtual Components
The Shelly 2L Gen3 is a smart 2-channel switch that works without a neutral wire – perfect for upgrading existing installations. With support for both Wi-Fi and Bluetooth, the device can easily be integrated into your smart home system. The two relays can be controlled independently or in sync, making the Shelly 2L Gen3 suitable for a wide range of applications, such as switching lights or small appliances.
The compact size allows the module to fit neatly behind an existing wall switch. Thanks to the phase-only wiring, the Shelly 2L Gen3 is ideal for renovation projects or situations where only a phase wire is available. The smart switch operates locally and does not require a cloud connection.
Features:
Works without a neutral wire (phase-only)
2 independent relays
O1 max. 200 watts
O2 max. 700 watts
230 volts
For proper operation, the included bypass must be connected to the load on O1
Size 37x42x16mm
Works via Wi-Fi and Bluetooth
Supports scripting and webhooks
Compatible with Alexa, Google Home, and SmartThings
Can be used standalone or via Shelly Cloud
Supports MQTT, CoAP, and REST API
The Shelly 2PM Gen4 is a smart 2-channel relay module with power monitoring, suitable for switching lights, blinds, and other electrical devices. Each channel supports a load of up to 10 A, with a total of 16 A for the entire device.Differences compared to the previous generation include an upgraded chipset, more memory, and added support for Zigbee and Matter (via WiFi).The module is designed for installation behind existing switches and operates fully standalone via WiFi, with no hub required. Thanks to the built-in power monitoring, you get precise insight into the consumption of both channels separately.The Shelly 2PM Gen4 features enhanced security options, scripting support, local and cloud control, direct MQTT integration, and Bluetooth provisioning for quick setup. The module is compatible with Shelly Smart Control, works locally via web interface, and supports integrations with Home Assistant, MQTT, and SmartThings.Features2 switches with separate energy monitoringUp to 10 A per channel (16 A total).ZigbeeMatter (via WiFi)Suitable for motor controlBlind control (reversible output)Energy monitoringWorks without a hub via WiFi and LAN.Supports scripting, TLS, and MQTT.Bluetooth provisioning for fast setup.
Measure and register energy consumption within your home easily and accurately with this Shelly 3-phase energy meter. The must-have for every installer, but of course also for anyone who wants real-time insight into their household's consumption. Even the yield of your solar panels is now easy to measure. 3 power clamps are included with a maximum capacity of 120 amps each.The product is also very useful for load balancing of electric cars. This way you can charge without fear of power outages due to overload. You can switch off per phase using the outputs on the Shelly 3EM devices when the load on that phase becomes too high.FeaturesOpen source Works stand-alone via WiFi 2.4 Ghz Built-in web server Access Point and Client Mode Supported HTTP and/or UDP Energy meter with Contactor Relay switch Power supply 110-230VAC Contactor Output Relay max. 230V/10A Works with MQTT Easy to install Installation, e.g. in meter cupboard Scene activation via App ESP8266 with 4MB flash/debug chip Current measurement, stored locally for up to 365 days 3x120A clamps included
The Shelly 3EM-63T Gen3 is a three-phase energy meter for accurate real-time monitoring of energy consumption and production. It measures three phases or three independent single-phase circuits up to 63A per phase and is suitable for both residential and commercial installations.This model features flat terminals for the phase connections (LA, LB, LC) and a neutral wire (N). The meter is mounted directly above or below DIN-rail mounted circuit breakers or RCDs; the phase conductors are routed through the integrated current transformers (Ø8 mm). This saves DIN-rail space and ensures a neat finish in the distribution board.FeaturesThree-phase measurement: three separate phases or three independent single-phase circuits up to 63A per phaseFlat terminals (LA, LB, LC) and neutral wire (N)Measures voltage, current, active and apparent power, energy and power factor per phaseMeasurement accuracy ±1% (2-63A)Suitable for monitoring consumption and feed-in, e.g. with solar panelsData storage: at least 7 days at 1-minute resolutionConnectivity: Wi-Fi and BluetoothIntegration via MQTT, HTTP, webhooks and scriptingPower supply: 220-240V AC, 50/60 Hz (between LA and N); self-consumption < 2WDimensions: 31 x 54 x 42 mm (without wire), weight 52 gExternal protection: max. 63A, characteristic B or C
The Shelly 3EM-63W Gen3 is an advanced three-phase energy meter, designed for precise real-time monitoring of energy consumption and production. With integrated Wi-Fi and Bluetooth connectivity, this device offers extensive energy management capabilities, both in residential and commercial environments.This model is equipped with color-coded wires for phase connections (LA, LB, LC) and a neutral input (N). This version is ideal for situations where wired connections are preferred or required.FeaturesThree-phase measurement: Monitors three separate phases or three independent single-phase circuits up to 63A per phase.Two-way energy measurement: Suitable for both consumption and energy feedback, ideal for solar systems.Wi-Fi and Bluetooth connectivity: Ensures a reliable connection for continuous monitoring and data transmission.Accurate measurements: Measures voltage, current, active and apparent power, and power factor per phase in real-time.Data storage: Stores measurement data for at least 7 days with a 1-minute resolution, allowing for historical analysis.Compatibility with smart home platforms: Supports integration with MQTT, Home Assistant, Node-RED, and other automation systems.Safe and easy installation: Designed for DIN-rail mounting with miniature circuit breakers (MCB) or residual current devices (RCD), featuring a compact form factor and simplified wiring.
The Shelly DALI Dimmer Gen3 enables smart control and management of DALI lighting, ideal for both residential and commercial use. This DALI dimmer functions as a single-master application controller for compatible LEDs with DALI control. With the ability to connect directly via Wi-Fi and Bluetooth, the Shelly DALI Dimmer Gen3 offers extensive integration options and unique features for advanced lighting experiences.FeaturesSingle-master DALI controllerDual input for switches: Flexible control with one or two buttons for dimming and on/off control.Night mode and precise brightness control: Set a lower brightness for nighttime and manage maximum and minimum brightness.Wi-Fi Range ExtenderScripting and webhooksNo hub required: Fully standalone via Shelly app or integration with 3rd-party systems like Alexa, Google Home, and Samsung SmartThings.Supports MQTT and KNX: Broad compatibility with smart home systems for seamless integration.
The Shelly Dimmer 0/1-10V PM Gen3 (the device) is a smart dimmer controller that allows you to dim drivers remotely via your mobile phone, tablet, PC, or a home automation system. The device can operate independently on a local Wi-Fi network or via cloud-based home automation services. The device is a current sourcing controller and supports both 0-10V and 1-10V drivers.FeaturesBluetooth: The device complies with the Bluetooth standard and can connect with other Bluetooth devices to exchange data over short distances.BLE GatewayWi-FiWi-Fi Range ExtenderScriptingBasic schedules: Supports weekly schedules and routines, including setting brightness, transition duration, and the flip value of the dim signal.Advanced schedules: Offers detailed schedules and routines for the entire year, with extended time settings from seconds to months, including brightness setting, transition duration, and flip value of the dim signal.Shelly Plus Add-On compatibleAuto on/off timersLocal actions: Allows you to create automation scenarios within the local Wi-Fi network, including setting brightness, transition duration, and the flip value of the dim signal.Webhooks: Supports automation through lightweight, event-driven communication with other devices.Compatibility: Highly compatible with third-party home automation systems.No hub required: Ready to use both locally and remotely via Shelly Smart Control or third-party systems.Activity log: Stores a detailed history of events.KVS (Key-value storage): The KVS service provides basic storage for key-value pairs.Customizable thresholds and offsets for temperature, humidity, and light when used with the Plus Add-on.Protection against overcurrent, overvoltage, and overpower.Power measurement: Accurate monitoring of energy consumption. Information on voltage (V), current (A), and consumption (W) is displayed.Diverse driver integrations: Supports 0-10V and 1-10V drivers (such as lights, motors, valves, etc.).Night mode: Allows setting a specific brightness level for the lights during the night.Power-on brightness: If the night mode brightness is lower than the minimum power-on brightness, the minimum power-on brightness will be applied.Switch/button input mode: Provides flexible input control via switches and/or buttons.Single-button dim controlDual-button dim controlTransition duration: Determines the time for dimming from 0 to 100% when turning on and from 100 to 0% when turning off.Minimum power-on brightness: Brightness level (in percentage) applied when powered on and the current brightness is lower than the 'minimum power-on brightness'. Default is 3%. This is not applied when an explicit (custom) transition is defined in schedules and actions.Min/Max brightness: Limits the range of the dim signal for more accurate brightness control at the output.Button fade speed: Determines how quickly the output brightness changes when holding the button(s). Default is 3x.Button presets: State applied upon a double-click event. Default value is 100%.Virtual components: A special set of components that are not initially present in the device and are dynamically created by the user.
With this module you can wirelessly switch and dim your lamps or devices on or off via your smartphone! Your physical wall switch will continue to work as usual. Set up some fun scenes (scenarios) in your smart-home system or use the free app. For example, with this module you can automatically turn on your lights when the sun sets. Or dim your lights a bit in the middle of the night. FeaturesOpen sourceWorks stand-alone via WiFi 2.4 GhzBuilt-in web serverAccess Point and Client ModeSupported HTTP and/or UDP110-240VAC;0-220W Halogen with blue neutral wire0-200W LED with blue neutral wireMin. 10W without blue neutral wire or otherwise with Bypass.Protected against overheating and overloadWorks with MQTT< li>Works with Google Home or AlexaEasy to installRecessed, behind (wall) switchWorks with switch, pulse switch, hotel switch< li>Pulse switch for dimmingScene activation via AppESP8266 with 4MB flash/debug chipMax. load to be setNo blue neutral wire required for connection
The Shelly Dimmer Gen4 is a versatile smart dimmer that allows you to easily dim and automate lighting. Thanks to its compact design, the dimmer fits neatly behind existing wall switches without requiring a neutral wire. With support for Wi-Fi, Bluetooth, Zigbee and Matter, the Shelly Dimmer Gen4 provides a reliable connection to your smart home network and can be easily controlled via the Shelly Smart Control app.
Features
Works without a neutral wire – Ideal for existing electrical installations.
Supports Wi-Fi and Bluetooth – Direct connection to your network without an additional hub.
Advanced dimming – Adjustable brightness levels for optimal lighting.
Energy monitoring – Monitor the power consumption of connected lighting in real time.
Compatible with voice assistants – Control via Google Assistant, Amazon Alexa and Home Assistant.
Suitable for various light sources – Supports incandescent lamps, dimmable LEDs and halogen lighting.
Accurately and wirelessly measure the energy consumption of your appliances and solar panels. You can switch off devices in the event of overload via the switchable relay. Or use time-bound schedules. Shelly works directly with your WiFi signal, so you don't need a controller.The Shelly EM Energy Meter with Contactor Relay Switch supports 110-230VAC, and has an ESP8266 with 4MB flash chip built-in. This makes it possible to flash your own or alternative firmware, such as Tasmota. This requires a USB-to-UART 3.3V and at least 350mA adapter, such as our FTDI adapter. And the great thing is, you don't even have to open the Shelly. Flashing is easy via the directly accessible pins on the outside.FeaturesOpen source Works stand-alone via WiFi 2.4 Ghz Built-in web server Access Point and Client Mode Supported HTTP and/or UDP Energy meter with Contactor Relay switch Power 110 -230VAC Contactor Output Relay max. 230V/2A Works with MQTT Easy to install  ;Installation, e.g. in meter cupboard Scene activation via App ESP8266 with 4MB flash/debug chipCurrent measurement, locally stored for up to 365 days
The Shelly EM Gen3 offers precise and wireless energy measurement for your devices and solar panels. With a switchable relay, you can easily turn off devices during overload or set up time-based schedules. The Shelly EM Gen3 works directly with your WiFi network, so no additional controller is needed. This new generation also provides numerous improvements and additional functionalities.New features and improvements of the Shelly EM Gen3:Bluetooth connectivity: In addition to WiFi, the Shelly EM Gen3 has Bluetooth, simplifying initial setup and configuration.Extended protocol support: The Gen3 supports additional protocols such as MQTT, HTTP, WebSocket, and RPC, allowing integration with various home automation systems and automation platforms.Enhanced internal storage: With 8 MB of memory, the Shelly EM Gen3 can store up to 10 days of energy data at one-minute intervals, enabling detailed energy analysis.Real-time clock: A built-in clock allows for precise time-based schedules and automations, even without a constant internet connection.Support for scripting and webhooks: Users can now set up custom scripts and webhooks for advanced automations and notifications.Compatibility with Matter: The new Shelly chipset is compatible with the Matter standard, enabling seamless integration with other smart home devices.Other features of the Shelly EM Gen3:Open sourceStandalone WiFi (2.4 GHz)Built-in web serverAccess Point and Client ModeEnergy management with Contactor Relay: switchable relay for 230V/2AEasy installationScene activation via the appESP8266 with 4MB flash chip
The Shelly EM Gen4 is a smart energy meter designed to accurately monitor the power consumption of one or two electrical circuits. Using the included 50A current transformer, energy consumption can be measured without interrupting the existing wiring. It is ideal for monitoring a distribution board, heat pump, EV charger or solar installation.
The energy meter supports two independent measurement channels. By adding an optional second current transformer, the energy consumption or production of a second circuit can be monitored simultaneously. Measured data is stored locally with a one-minute resolution, providing detailed insight into both current and historical energy usage.
The Shelly EM Gen4 supports Wi-Fi 6, Zigbee, Bluetooth and Matter, making it easy to integrate into a wide range of smart home systems. Configuration and monitoring can be carried out via the Shelly Smart Control app, the built-in web interface or platforms such as Home Assistant.
In addition to energy monitoring, the Shelly EM Gen4 features a dry contact relay that can be used to control, for example, a contactor. This allows electrical loads to be switched automatically based on measured energy consumption or user-defined automations.
Please note: One 50A current transformer is included as standard. An additional compatible current transformer is required to monitor a second circuit.
Features
Smart energy meter for single-phase installations
Two independent measurement channels
One 50A current transformer included
Supports an optional second current transformer
Compatible with 50A, 80A and 120A current transformers
Measures voltage, current, active power, apparent power and energy consumption
Local data storage with one-minute resolution for at least 30 days
16 MB flash memory
Supports Wi-Fi 6, Zigbee, Bluetooth 5 and Matter
Dry contact relay for controlling a contactor
Supports MQTT, webhooks, scripting and Modbus
Local configuration via the built-in web interface
Works with the Shelly Smart Control app and Home Assistant
Protection against overheating, overvoltage, overcurrent and overload
Compact design for installation in a distribution board
Shelly i4 Gen3 is a smart Wi-Fi switch input that allows you to manually activate or deactivate any created scene, execute synchronized actions, or implement complex trigger scenarios. With Shelly i4 Gen3, you can control other connected Shelly switches, sensors, or HTTP- and MQTT-driven devices. Due to its compact size, the Shelly i4 Gen3 fits behind almost any wall switch and can display the status and control the action of four inputs. The device also has an improved processor and more memory compared to its predecessor.You can access and monitor the Shelly i4 Gen3 remotely from any location with internet access, as long as the device is connected to a Wi-Fi router and the internet.The device can be easily installed in standard electrical wall boxes, behind sockets, light switches, or in other places with limited space.The Shelly i4 Gen3 features a built-in web interface that allows you to control and configure the device.FeaturesWi-Fi ConnectivityIntegration with Smart Home Platforms: The Shelly i4 Gen3 can be integrated with popular smart home platforms such as Google, Alexa, and Samsung SmartThings. This allows voice control and automation through these platforms.Local and Cloud Control: Operates independently within a local Wi-Fi network but can also be controlled via cloud home automation services.Bluetooth ConnectivityImproved Processor and MemoryBLE Gateway: Acts as a bridge between your Shelly BLU devices and the broader Shelly ecosystem. It receives Bluetooth signals and sends them to the cloud or locally to another non-Bluetooth device.Wi-Fi Range Extender for IoT devicesScripting: For advanced functionalities via ShellyScriptWide Integration Capabilities: The device can be integrated with external home automation systems via documented HTTP API, MQTT(s), Web Hooks via HTTP and HTTPS, UDP.Virtual Components: Learn more about virtual components
Shelly LAN Switch is a DIN-mountable Ethernet switch with 5 RJ45 ports. It provides a seamless solution to expand network capabilities without the hassle of extensive rewiring. It is designed for reliability and performance, ensuring a consistent and stable direct network connection to devices.FeaturesDIN mountable5 RJ45 ports10/100mbpsLED indicators110V - 230V power supply; No additional adapters are required
The Shelly LoRa Add-on is a powerful extension for Shelly Gen3 and Gen4 devices, designed to enable long-range communication via the LoRa protocol. Ideal for remote locations or environments where Wi-Fi or LAN is unreliable or unavailable. Thanks to its low frequency and energy-efficient operation, this add-on provides a stable connection with minimal power requirements.Features:Enables LoRa communication on Shelly Gen3 and Gen4 devicesSupports long-range communication (up to several kilometers in open field)Easy installation via the add-on header of supported Shelly devicesFrequency: LoRa 868 MHz (EU version)08-05-2025 – currently compatible with the following devices:Shelly Gen3 Devices:Shelly 1 Gen3Shelly 1PM Gen3Shelly 2PM Gen3Shelly EM Gen3Shelly Dimmer 0/1-10V PM Gen3Shelly DALI Dimmer Gen3Shelly Gen4 Devices:Shelly 1 Gen4Shelly 1PM Gen4Shelly 2PM Gen4
The Shelly Plus Dimmer 0-10V is designed to control 0-10V dimmable drivers wirelessly via WiFi. And the great thing is, you can also use the wall switch.Switch on/off and dim your lights wirelessly with your smartphone, from anywhere in the world. Easily create smart scenes (scenarios) and set timers in the free App for your home automation. For example, automatically turn on your lights at sunset or automatically dim your lights at night between 11:00 PM and 6:00 AM. Voice control with Siri, Google Assistant or Amazon Alexa is also possible.Features Open source, no hub required Works stand-alone via WiFi 2.4 Ghz Bluetooth for easy connection to your home WiFi< li> Built-in web server Access Point and Client Mode Supported HTTP and/or UDP 110-240VAC; Output max. 10VDC and 0.35W Protected against overheating and overload Works with MQTT Works with Google Home or Alexa Easy to install Recessed, behind (wall) switch Works with switch, pulse switch, hotel switch li> Pulse switch for dimming Scene activation via App ESP32 with 4MB flash/debug chip Wi-Fi Fi Range Extender & BLE GatewayScripting, webhooks, MQTT, WebSocket, HTTPS, UDP, TLS and custom certificates< div>
The Shelly Plus AddOn is the ideal module to connect up to five DS18B20 temperature sensors or one DHT22 temperature and humidity sensor to a Shelly Plus module.In this way you can have your Shelly Plus modules automatically switching based on the measured temperature or humidity. For example, measure the temperature of your aquarium with a DS18B20 sensor, so you ensure that the water always has the right temperature by starting or stopping heating on time.The Shelly Plus modules that the AddOnn works with are:- Shelly Plus 1- Shelly Plus 1PM- Shelly Plus 2PM- Shelly Plus i4/i4DCBesides With the previously mentioned sensors, almost every universal sensor can be connected to the Shelly Add-on. Below are some examples of sensors that can be used:- Read contact- Water/rain sensor- Wind sensor- Soil moisture sensor div>- PIR sensorThis is how you can use the Add-on to close your awning when the wind is blowing or it's raining, you can read the position of your garage door or, for example, operate your garden sprinklers when the ground is too dry.< /div>Features Add-on for all Shelly Plus actors Works in combination with the Shelly Plus via WiFi 2.4 Ghz Connect up to max. 5x DS18B20 sensors or 1x DHT22 sensor 1x analog and 1x digital input Galvanically isolated Easy to install Scene activation via App Temperature and/or Humidity history API support< /div>
The Shelly PM Mini is an energy meter actor with which you can easily measure the use of the connected lighting or other electrical device. This actor does not have a switching contact, so this prevents you from accidentally switching your device.The difference with the previous generation is that the Gen 3 has a faster processor and has more memory.Mini switchWith a size of only 29x34x16 mm, the Shelly PM Mini Gen 3 is one of the smallest actors on the market. This ensures that the energy meter fits in almost every flush-mounted box. Despite its small size, this energy meter can measure as much as 16A ampere at 230V.Supported load types
Resistive (Ohms) – Incandescent, halogen, heating devicesCapacitive – Electronic equipment with capacitors Inductive – LED lighting, LED drivers, air conditioning and fansFeaturesWorks stand-alone via WiFi 2.4 Ghz
Bluetooth 4.2 for WiFi
WiFi booster and Bluetooth Gateway
Built-in web server
Energy meterPower supply 110-240VAC Max. 16AScene activation via App
The Shelly Pro 1 is a 1-channel potential-free relay with a maximum output of 16A. The smart switch has a design suitable for a DIN rail, so you can easily place it in your distribution box.The smart switch works with WiFi, LAN and Bluetooth and is therefore compatible with, among other things, the Homey, Smartthings and Home Assistant.Thanks to the WiFi protocol, you can also use it without a hub via the Shelly Smart Home App. You simply place the switch in your distribution box on a DIN rail, you can make a maximum of one group of 16A smart and switch it with the Shelly Pro 1.It has a Sunset/Sunrise schedule, but you You can set up to 50 actions for your daily or weekly schedules (even without a smart hub). The new Shelly pro series has had an upgrade based on safety, there is temperature, fire and overvoltage safety.It is also possible to use the switch for mjs -scripting. This means that it is possible to write scripts for the smart switch yourself to apply features and functionalities yourselfSupported load typesResistive (Ohmic) – Incandescent, halogen, heatersCapacitive – Electronic equipment with capacitorsInductive (with RC Snubber) – LED lighting, LED drivers, air conditioning and fansAttention! The switch-on peak of inductive loads such as LED lighting damages the relays. Use the RC Snubber to absorb this switch-on peak.FeaturesOpen sourceESP32 chip Works stand-alone via LAN or WiFi 2.4 Ghz Access Point and Client Mode Supported HTTP and/or UDP Supported mjS scripting 110-240VAC Output max. 16A/3680W Works with MQTT Easy to install< br>
Shelly smart WiFi switch with current measurement for switching and/or measuring, for example, the consumption of your lighting or washing machine. The design of the module makes it fit perfectly on a DIN rail in your distribution box.The Shelly Pro 1PM measures the energy consumption of the connected group so that you get a clear overview of this. This helps you save on your energy bill, for example switch off the group if too high a wattage is measured.You can even control this WiFi switch via voice. operate in combination with Google Home, Amazon Alexa or Home Assistant.The new safety features of the Shelly pro series ensure that the modules are protected against overvoltage, fire and overheating. The Shelly Pro 1PM can make a maximum of one 16A group in your distribution box smart and monitor its energy consumption.The module also support mjs-scripting which means you can create your own features and functionalities.Supported load types< /b>Resistive (Ohms) – Incandescent, Halogen, Heaters Capacitive – Electronic equipment with capacitorsInductive (with RC Snubber) – LED lighting, LED drivers, air conditioning and fans< span style="letter-spacing: 0px;">Attention! The switch-on peak of inductive loads such as LED lighting damages the relays. Use the RC Snubber to absorb this switch-on peak.Features Open source ESP32 chip on board Works stand-alone via LAN or WiFi 2, 4Ghz Bluetooth for easy pairing Built-in web server Access Point and Client Mode Supported HTTP and/or UDP Supported mjS scripting 110-240VAC Output max. 16A/3680W Current measurement Works with MQTT Easy to install
The Shelly Pro 2 is a potential-free WiFi switch that can operate 2 channels. Ideal to use for your lighting, garage door or doorbell. You can even operate it with a voice assistant. The switch has a unique design so that the switch fits on a Din rail in your distribution box.The Shelly Pro 2 has 2 outputs that together can switch a maximum of 25A, but be careful because the maximum per channel is 16A. The design of the Shelly Pro Series is made in such a way that you can easily mount the smart switches on a DIN rail in your distribution box.The switching relay works on WiFi, LAN and Bluetooth and can therefore be used with, among other things, the Homey and Smartthings. Do you want to control the switch using a voice assistant? This is possible in combination with Google Home, Amazon Alexa and Home Assistant. You can also use the module stand-alone via the Shelly Smart home app.There are new safety functions on the module that protect the module against overheating, fire and overvoltage. There is a Sunset/Sunrise schedule in the module, but you can add up to 50 actions of your own. You can also write your own script for the Shelly Pro 2 using mjS scripting, giving the module its own features and functionalities.Supported load typesResistive (Ohmic) – Incandescent, halogen, heatersCapacitive – Electronic equipment with capacitorsInductive (with RC Snubber) – LED lighting, LED drivers, air conditioning and fansAttention! The switch-on peak of inductive loads such as LED lighting damages the relays. Use the RC Snubber to absorb this switch-on peak.Features Open source ESP32 chip Works stand-alone via LAN or WiFi 2.4 GhzBluetooth for easy pairingAccess Point and Client Mode Supported HTTP and/ or UDP Supported mjS scripting 110-240VAC Output max. 2x16A/2x3680W, total max 25A. Easy to install
The Shelly Pro 2PM is a double switch with current measurement. It works on WiFi, LAN and Bluetooth and can be used both stand-alone and with a smart home hub. The design of the smart switch ensures that you can mount the switch in your distribution box on a DIN rail.The ideal product to switch and/or measure your lighting, washing machine or garage door. Thanks to the unique design of the WiFi switch, you can easily mount it on a DIN rail. It is a double switch, you can switch 25A with the switch, but a maximum of 16A per group.The Shelly Pro 2PM measures and monitors the energy consumption of the linked groups. This gives you a clear overview of where you use the most energy and therefore where you can save money. For example, create a scenario that automatically switches off a group if it has a certain wattage at night if you are not using it. This way you prevent unnecessary energy consumption and therefore save on your energy bill.The module supports mjS scripting so you can create your own features and functionalities with this module. The new Shelly Pro series has improved safety than previous Shelly products, as it has overvoltage, fire and temperature protection.This is the double WiFi switch with current measurement, but a single version is also available. Supported load typesResistive (Ohms) – Incandescent lamp, halogen, heating appliancesCapacitive – Electronic equipment with capacitorsInductive (with RC Snubber) – LED lighting, LED drivers, air conditioning and fansNote! The switch-on peak of inductive loads such as LED lighting damages the relays. Use the RC Snubber to absorb this switch-on peak.Features Open source ESP32 chip Works stand-alone via LAN or WiFi 2.4 Ghz Built-in web server Supports HTTP and/or UDP Supported mjS scripting 110-240VAC Output 2x16A/3680W on the same phase, max 25A totalRoller shutter functionCurrent measurement Works with MQTT Easy to install
With the Shelly Pro 3 WiFi switch you can easily automate or switch 3 different groups with your smartphone. The smart WiFi switch from Shelly has a design that fits perfectly on a DIN rail in your distribution box, so you can neatly conceal the module. Create and automate up to 3 groups with the Shelly Pro 3.The Shelly pro has 3 potential-free relays that you can switch from anywhere in the world with your smartphone. The 3 switchable outputs can each automate or switch their own group. A maximum of 16A can be switched per output and a maximum of 48A over the entire device.The switch works on WiFi and can therefore be used stand-alone via the Shelly app, but you can also add the smart switch to various smart home controllers such as the Homey or the Smartthings hub. Also control the smart switch with voice via Google Assistant, Amazon Alexa or Apple HomeKit.Supported load types< /span>Resistive (Ohms) – Incandescent, halogen, heatersCapacitive – Electronic equipment with capacitorsInductive (with RC Snubber) – LED lighting, LED drivers, air conditioning and fansAttention! The switch-on peak of inductive loads such as LED lighting damages the relays. Use the RC Snubber to absorb this switch-on peak.Features ESP32 chip Works stand-alone via LAN or WiFi 2.4 Ghz Bluetooth for easy pairing li> Supported HTTP and/or UDP Supported mjS scripting 110-240VAC Output max. 3x16A /3x3680W, total max 48A. Max. 240VAC and 30VDC relay switching Works with MQTT< br>
The Shelly Pro 3EM Switch Add-On ensures that you can also switch with the Shelly Pro 3EM in addition to the energy meter. The Shelly Pro 3EM is a 3-phase energy meter that can monitor all energy consumption in your home. The Shelly Pro 3EM Switch Add-On expands the functionalities of the Shelly Pro 3EM.Shelly Pro 3EMThe Shelly Pro 3EM is a 3-phase energy meter that monitors the energy consumption of the linked phases, but the Shelly Pro 3EM can also measure the yield that your solar panels produce, for example. The Shelly Pro 3EM in itself is only an energy meter, but this Switch Add-On module ensures that you can also switch the phases linked to Shelly Pro 3EM.The Shelly Pro 3EM in combination with the Switch Add-On you can use energy optimization based on the weather. For example, you can set your heating to switch off automatically on a hot day. But also consider switching off your solar panels when the energy rate is negative.It is also possible to automatically switch on your products if the Shelly Pro 3EM measures that your solar panels produce more energy than you consume. you are consuming. For example, you can automatically charge your electric carswitch on.Supported load typesResistive (Ohmic) – Incandescent, halogen, heating appliancesCapacitive – Electronic equipment with capacitorsInductive (with RC Snubber) – LED lighting, LED drivers, air conditioning and fansNote! The switch-on peak of inductive loads such as LED lighting damages the relays. Use the RC Snubber to absorb this switch-on peak.FeaturesOpen source Only works via the Shelly Pro 3EM via WiFi or LAN Bluetooth 4.2 for easy WiFi connection Built-in web server Access Point and Client Mode Supported HTTP and/or UDP Power supply via the Shelly Pro 3EM 3.3 and 12VDC Galvanically isolated relay max. 2A at 240VAC or 30VDC< /li> Works with MQTT mJs scripting WebHooks (URL actions), 20 with 5 URLs per hook Easy to install Installation DIN-Rail, e.g. in meter cupboard Scene activation via App
The Shelly Pro 3EM is a 3-phase energy meter that can be mounted on DIN rail. The smart energy meter measures the energy consumption in your home and reports the energy (cumulative), voltage, current and power factor per phase in real time. 3 CT clamps are included with a capacity of 120A.The Shelly energy meter has a measuring accuracy of 1% and stores all measured data for a period of 60 days and a progress per minute per phase.The Shelly Pro 3EM can be used to measure both sides, so on the one hand your consumption and on the other hand the generation of power through solar panels.The Pro 3EM can also be integrated into an existing MODBUS installation . The Shelly Add-on can also be physically attached to this product. For example, you can measure the humidity or temperature in your technical room.The Pro 3EM cannot switch itself, but you can of course use the measurements it makes as input for a scene in which another Shelly device turns something on or off.Features Open source Works stand-alone via WiFi 2.4 Ghz or LAN Bluetooth 4.2 for easy connection to WiFi Built-in web server Access Point and Client Mode Supported HTTP and/or UDP Power 110-240VAC Works with MQTT mJs scripting WebHooks (URL actions), 20 with 5 URLs per hook Easy to install 16MB flash/debug chip Internal temperature meter Voltage meter ±1% Ammeters 0-120A, ±1% (2 - 120 A), ±2 % (1 - 2 A), ±5 % (0 - 1 A) OTA firmware updates Current measurement, per minute, stored up to 60 days 3x120A clamps included
Shelly Pro 3EM-3CT63 is a DIN-rail mountable energy consumption monitor for both single-phase and three-phase systems. Enhanced with all the flexibility of Gen2 firmware and featuring LAN connectivity, the device provides professional integrators with additional options for end-user solutions. It can operate independently within a local LAN and/or Wi-Fi network, or be controlled via cloud home automation services using Modbus, MQTT, HTTP, and WebSocket. All incoming connections support TLS.The device reports both total energy consumption and the direct voltage, current, active and apparent power per phase/channel in real-time. Data is stored in non-volatile memory and can be retrieved for up to 60 days in one-minute intervals.The device features a real-time clock to maintain accurate time if the connection to an SNTP server is lost.Shelly Pro 3EM-3CT63 can be accessed, configured, and monitored remotely by the user as long as the device and the automation system are within the same network infrastructure.The device has a built-in web interface allowing you to monitor, control, and adjust settings.⚠ WARNING! The device does not have a built-in relay. Switch control is enabled by using a Shelly Pro 3EM Switch Add-on, which can be connected to the Shelly Pro 3EM-3CT63.FeaturesFour-quadrant measurementDIN-rail mountableVarious connection options: suitable for both single-phase and three-phase installationsCurrent transformer connection: non-contact measurementsPhase sequence fault detection* (optional)Channel-to-channel calibration**Low threshold for load detection***Optical pulse indication of energy consumptionReal-time clock: recorded data maintains accurate timestamps even if the internet connection is interrupted****Data log: up to 60 days of data stored on the device for later useExternal switch control: loads can be controlled based on device automation or scripts. Available with the addition of the Shelly 3EM Switch Add-onAccuracy class B (IEC 62053-21)Suitable for photovoltaic systems*The device features circuits for phase sequence fault detection. This detection works based on phase voltages and only considers the zero-crossings. The normal order of these crossings is Phase A, followed by Phase B, followed by Phase C. If the order is instead Phase A, followed by Phase C, followed by Phase B, a phase sequence fault will be reported when the fault detection option is enabled.**A minimum load of 500 W per channel is required.***If the total load for the three channels drops below 30 VA per channel, the measured power level will be displayed, but no consumed energy will be added to the statistics. A no-load threshold notification will appear in the device's web interface and mobile app.****Shelly devices rely on an internet connection for timekeeping. In case of network issues or service interruptions, the built-in clock ensures accurate timestamps for records.
With the Shelly PRO 3EM - 400 WiFi Energy Meter you can easily and accurately monitor and register energy consumption wirelessly or via Ethernet cable, for 3 phase or 3x 1 phase, such as your solar panels. What is new about this Shelly PRO 3EM is 400A CT clamps, a fast ESP32 chip, in addition to WiFi, LAN connection and Bluetooth, and of course the DIN-Rail version. The open source ensures that you can integrate Shelly 3EM with almost any home automation system. But Shelly also has its own free App with which you can easily and cheaply set up a Smart Home System without the costs of a Gateway/Hub.FeaturesOpen source Works stand-alone via WiFi 2.4 Ghz or LAN Bluetooth 4.2 for easy WiFi connection Built-in web server Access Point and Client Mode  ;Supported HTTP and/or UDP Supports MODBUS Power supply 110-240VAC Free Android or IOS App< li> Free Shelly cloud Works with MQTT mJs scripting WebHooks (URL actions), 20 with 5 URLs per hook Easy to install Installation DIN-Rail, e.g. in meter cupboard Scene activation via App ESP32 with 16MB flash/debug chip Internal temperature meter Voltage meter ±1 % Ammeters ±1 % (5 - 400 A), ±2 % (0- 5 A) OTA firmware updates Current measurement, per minute, stored up to 60 days 3x120A clamps included
This smart switch from Shelly has four switchable outputs with current measurement. The module is intended for mounting in the meter cupboard on a DIN rail. This way you can easily access it and save space in your flush-mounted boxes.The Shelly 4PM, like the other Shelly modules, can be accessed via Wi-Fi, but these modules also have a LAN input, so it can also be wired. can be connected and is therefore more stable in the network. These Shelly modules have a new way of connecting in the Shelly app, namely via Bluetooth! This makes the process of connecting in the Shelly app a lot easier and faster. The Shelly products work with WiFi and are therefore easy to integrate into other systems such as Google Home, SmartThings, Homey, but also in Home Assistant, for example. The Shelly 4PM can output 16A per channel with a maximum power. for the entire 40A module. The module has built-in protection against overheating of the module and overvoltage protection.Supported load types Resistive (Ohms) – Incandescent, halogen, heating devicesCapacitive – Electronic equipment with capacitorsInductive (with RC Snubber)– LED lighting, LED drivers, air conditioning and fansCaution! The switch-on peak of inductive loads such as LED lighting damages the relays. Use the RC Snubber to absorb this switch-on peak.FeaturesESP32 chipWorks stand-alone via LAN or WiFi 2.4 GhzBluetooth for easy pairingAccess Point and Client ModeSupported HTTP and/or UDPSupported mjS scripting110-240VACOutput max. 4x16A/3680W, 40A totalCurrent measurement, and 1.8 inch status color screenFire retardant (flame retardant V0)Free Android or IOS Shelly Cloud App < /div>
With this switch for in the meter cupboard you can switch 2 screens, roller shutters or other similar applications independently of each other. Both outputs can carry a load of up to 16 amps. You can also measure what both connected loads consume.Because the module calibrates itself you can see exactly what the position of your roller shutter is, so for example 0, 40 or 100%. In addition to the app, you can also read this physically on the screen of the module. In addition to WiFi, this double switch from Shelly can also be connected wired to the internet like all other Pro modules.Attention! The switch-on peak of inductive loads such as LED lighting damages the relays. Use the RC Snubber to absorb this switch-on peak.Features Open source ESP32 chip on board Works stand-alone via LAN or WiFi 2.4 Ghz Bluetooth for easy pairing Built-in web server Access Point and Client Mode Supported HTTP and/or UDP Supported mjS scripting 110-240VAC Output 2x16A/3680W on the same phase, max 32A total Roller shutter (open/close) function Current measurement Protected against overload Protected against overheating Protected against voltage peaks Free Android or IOS Shelly Cloud App Works with MQTT Easy to install Built-in distribution box, DIN-Rail Scene activation via App OTA firmware updates
Shelly Pro Dimmer 0/1-10V PM is a smart DIN-mountable dim controller that allows you to control dimmable drivers remotely via a mobile phone, tablet, PC, or home automation system. The device can operate independently within a local Wi-Fi network, but it can also be controlled via cloud home automation services. It is a current source controller and supports both 0-10V and 1-10V types of drivers.FeaturesDIN-rail mountingEnergy meteringBluetooth connectivityBLE gateway: Facilitates communication between BLE and Wi-Fi devices.Wi-FiWi-Fi Range ExtenderEthernet connectivityScripting: Ability to create automation scenarios via scripts.Advanced scheduling: Supports detailed schedules and routines throughout the year, with extensive time adjustments from seconds to months, including brightness settings, transition duration, and the flip value of the dim signal.Auto on/off timersWebhooks: Supports automation through lightweight, event-driven communication with other devices.Compatibility: Highly compatible with third-party home automation systems, including KNX.No hub requiredKVS (Key-value storage)Virtual and BTHome components: A special set of components that are not initially present in the device and can be dynamically created by the user.Diverse driver integration: Supports 0-10V and 1-10V drivers (lights, motors, valves, etc.).Night mode: Sets a specific brightness for lights during the night.Switch/button input mode: Flexible control inputs through switches and/or buttons:Single-button dim controlDual-button dim controlMinimum power-on brightness: Sets brightness to 3% (default value) when powered on if the current brightness is lower than the 'minimum power-on brightness'. This does not apply if a custom transition is set in schedules or actions.Min/max brightness: Refines the range of the dim signal for more precise brightness control at the output.Button fade rate: Controls how quickly the output brightness changes when the button(s) are held down. The default value is 3x.Button presets: State applied during a double-click event. The default value is 100%.
The Shelly Pro Dimmer 2PM is a DIN rail mountable dimmer. The module supports active energy measurement and is designed for dimming 2 light sources. The smart dimmer works with WiFi, LAN and Bluetooth and is therefore compatible with Homey, Smartthings and Home Assistant, among others. Thanks to the WiFi protocol, you can also use it without a hub via the Shelly Smart Home App. You simply place the dimmer in your distribution box on a DIN rail, you can dim 2 light sources with a maximum of 200 Watts per channel.Supported light sourcesIncandescent lampDimmable LED and CFLDimmable electronic transformersFeatures Open source
ESP32 chip on board
Works stand-alone via LAN or WiFi 2.4 Ghz
Bluetooth for easy pairing
Built-in web server
Access Point and Client Mode
Supported HTTP and/or UDP
Supported mjS scripting
110-240VAC
Maximum 200 watts per channelLeading edgeTrailing edge Current measurement
Protected against overload
Protected against overheating
Protected against voltage peaks
Free Android or IOS Shelly Cloud App
Works with MQTT
Easy to install
Built-in distribution box, DIN rail
Scene activation via App
Shelly Pro EM-50 is a single-phase energy meter with two channels for DIN rail mounting. It has an integrated switch with potential-free contacts for switching control.Easy operation via the Shelly Smart Control app, most platforms and protocols and via voice assistant . Use it with Alexa, Home Assistant or your favorite automation system.Shelly Pro EM-50A is a DIN-mountable 1-phase energy meter with integrated switch for switching control. With an accuracy of 1% when measuring active energy, the Shelly Pro can be used to monitor consumption and control any household appliances, power circuits and office equipment. The device has a 60-day data history at 1-minute intervals. In addition, the scripting features enable the execution of complex scenes and provide expanded monitoring capabilities.Features Open source Works stand-alone via WiFi 2.4 Ghz or LAN Bluetooth 4.2 for easy WiFi connection Built-in web server Access Point and Client Mode Supported HTTP and/or UDP Power supply 110-240VAC Free Android or IOS App< li> Works with MQTT mJs scripting WebHooks (URL actions), 20 with 5 URLs per hook Easy to install Installation DIN-Rail, e.g. in meter cupboard Scene activation via App ESP32 with 16MB flash/debug chip Internal temperature meter Voltage meter ±1% Ammeters 0-50A, ±1% (5 - 50 A), ±2% (0 - 5 A) Current measurement, per minute, stored up to 60 days 2x50A clamps included
The Shelly Pro LoRa Add-on is a professional expansion module for compatible Shelly Pro devices, designed for reliable long-range communication using LoRa technology. This solution is developed for installations where Wi-Fi, Ethernet or other wireless protocols do not provide sufficient range, such as larger buildings, technical rooms, outdoor locations, industrial environments or agricultural applications.
The module connects directly to a compatible Shelly Pro device via the Shelly serial interface and enables communication over distances up to 5 km, depending on the environment and installation conditions. Thanks to LoRa technology, communication remains stable even in environments with obstacles, walls or long distances between devices.
The Shelly Pro LoRa Add-on supports custom scripting, allowing installers to develop flexible solutions for monitoring, status notifications and remote control. This makes the module suitable for a wide range of professional automation projects where reliability and range are essential.
Features:
Professional LoRa expansion module for Shelly Pro devices
Communication range up to 5 km depending on local conditions
Operates on the EU868 LoRa frequency band
Suitable for industrial, commercial and large-scale installations
Reliable communication in environments with obstacles or limited network coverage
Easy connection via the Shelly Pro serial interface
Supports custom scripting and advanced automations
Suitable for one-to-one and multi-device communication
LED indication for transmitting and receiving LoRa data
Galvanically isolated design for stable communication
Powered directly via the connected Shelly Pro device
Compact design for DIN-rail installations
Note: At least two Shelly LoRa devices are required for LoRa communication. This can be a combination of two Shelly Pro devices with LoRa support or one compatible Shelly Pro device combined with a Shelly Pro LoRa Add-on.
Compatible devices: Shelly Pro RGBWW PM, Pro 1, Pro 2, Pro 1PM, Pro 2PM, Pro Dimmer 1PM, Pro Dimmer 2PM, Pro EM-50, Pro 3EM and Pro Dimmer 0/1–10V PM.
The Shelly Pro RGBWW PM is a five-channel smart LED controller for DIN rail mounting. Ideal for controlling RGB and white LED strips in various configurations. With five inputs (push button, switch, or analog signal) and five independently controllable outputs, this device is highly flexible for both residential and commercial applications.
The Shelly Pro RGBWW PM supports four profiles:
RGB + CCT (default)
CCT x 2
RGB + lights x 2
Lights x 5 (independent control of 5 LED groups)
In the Lights x 5 profile, five different LED strips or light groups can be controlled individually – ideal for zones or scenes.
In addition, the device includes integrated power metering to monitor voltage, current, and energy usage per channel in real time.
The Shelly Pro RGBWW PM works standalone in a local Wi-Fi network but is also fully compatible with cloud-based automation systems. Thanks to the built-in web interface, you can configure, operate, and monitor the device easily – locally or remotely over the internet.
Features:
DIN rail mounting
1DIN width – 19 mm
Power metering per channel
5 independent light channels (for RGB, CCT, or white LED strips)
5 inputs (push button, switch, or analog 0–10V)
Works without a gateway – standalone via Wi-Fi
Built-in web interface (accessible via IP)
Supports LAN (Ethernet), Wi-Fi, and Bluetooth
Supports scripting (Shelly scripting)
Supports MQTT, CoAP, REST API, and Webhooks
Supports KNXnet/IP
Works with Home Assistant, Homey Pro, Google Home, Alexa, and SmartThings
Built-in Wi-Fi range extender & Bluetooth Gateway for Shelly devices
Protected against overheating, overvoltage, and overcurrent
Dimensions: 94 x 19 x 69 mm
The Shelly Pro Sensor Add-On expands the functionality of a compatible Shelly Pro device with connections for external sensors. It allows you to monitor temperature, humidity and motion and use this information for automation. The galvanically isolated module is suitable for DIN rail mounting in an electrical distribution board or control cabinet.
The Shelly Pro Sensor Add-On lets you connect different sensors to your installation. The module features two independent 1-Wire channels, two 0–10 V analogue inputs and two ±15 V digital inputs. Each 1-Wire channel supports up to five DS18B20 temperature sensors. DHT22 temperature and humidity sensors are also supported.
Connected sensors allow you to control devices automatically based on sensor readings. For example, switch on ventilation when humidity rises or turn on lighting when motion is detected. The potential-free solid-state relay output can switch an external circuit up to a maximum of 30 V and 300 mA. Configure the sensors through the web interface of the connected Shelly Pro device.
The module works with Shelly Pro 1, Pro 1PM, Pro 2, Pro 2PM, Pro 3EM, Pro EM-50, Pro Dimmer 1PM, Pro Dimmer 2PM and Pro Dimmer 0/1–10V PM.
Please note: the Shelly Pro Sensor Add-On cannot operate independently. A compatible Shelly Pro device with firmware version 2.0 is required for power and operation.
Features
Expansion module for compatible Shelly Pro devices
Galvanically isolated sensor interface
Two independent 1-Wire channels
Up to five DS18B20 temperature sensors per channel
Support for DHT22 temperature and humidity sensors
Two 0–10 V analogue inputs
Two ±15 V digital inputs
Potential-free solid-state relay output, maximum 30 V and 300 mA
Configuration through the web interface of the connected Shelly Pro device
12 V power supplied by the connected Shelly Pro device
DIN rail mounting
Dimensions: 94 × 19 × 69 mm
The Shelly Qubino Wave 1 module is a Z-Wave 800 built-in switch with one potential-free output. The module is designed to control devices such as electric locks, garage doors, entrance gates, irrigation systems, electrical outlets and lighting. With a maximum load capacity of 16A, the module offers sufficient power for various applications. It is possible to control the module wirelessly via Z-Wave, as well as using a wall switch.
The module can be powered with a voltage of 110-240V AC, 24-48V DC or 12V DC, providing flexibility in power supply. In addition, the output is potential-free, which means that the input voltage can differ from the device you want to switch. This allows compatibility with various electrical devices. In addition, the module is equipped with protection against overheating.
Features
Z-Wave 800 series
Switch with potential-free output
Maximum load capacity: 16A
Protected against overheating
Supports over-the-air firmware updates (OTA)
Use with different types of switches
The Shelly Qubino Wave 1 mini module is a Z-Wave 800 built-in switch with one dry or potential-free contact and one switch. The module is designed to control devices such as gates, garage doors and other electrical appliances. It is possible to control the module wirelessly via Z-Wave, as well as using a single wall switch.
The module can be powered with a voltage of 110-240V AC. The potential-free contact has a maximum load capacity at 230v of 8A or 5A at 30V DC.Features
Z-Wave 800 series
Potential free switchMaximum load capacity at 230V AC - 8A / 30V DC 5ASupports over-the-air firmware updates (OTA)
Can be used with different types of switches
S2 security and SmartStart suitable
Format 29x35x16 mm
Wire 0.5 to 1.5 mm²
The Shelly Qubino Wave 1PM Mini module is a Z-Wave 800 built-in switch with one output and one switch. The module supports active energy metering and is designed to control devices such as lighting, sockets, heaters and other electrical appliances. It is possible to control the module wirelessly via Z-Wave, as well as using a single wall switch.
The module can be powered with a voltage of 110-240V AC. The maximum load capacity is 8A. In addition, the module is equipped with multiple protection functions, including protection against overheating, overvoltage and overcurrent.
Features
Z-Wave 800 series
Maximum load capacity at 8A
Protected against overheating
Supports over-the-air firmware updates (OTA)
Can be used with different types of switchesS2 security and SmartStart suitableFormat 29x35x16 mmWire 0.5 to 1.5 mm²
The Shelly Qubino Wave 2PM module is a Z-Wave 800 built-in switch with two outputs. The module supports active energy metering and is designed to control devices such as lighting, fans, infrared panels, heaters and other electrical appliances. It is possible to control the module wirelessly via Z-Wave, as well as using a wall switch.
The module can be powered with a voltage of 110-240V AC or 24DC, providing flexibility in the power supply. The maximum load capacity at AC is 16A and at DC it is 10A. The outputs of the Wave 2PM can switch 10A individually and 16A combined.
In addition, the module is equipped with multiple protection functions, including protection against overheating, overvoltage and overcurrent.
Features
Z-Wave 800 series
Maximum load capacity at AC: 16A, at DC: 10A
Protected against overheating
Supports over-the-air firmware updates (OTA)
Use with different types of switches
The Shelly Qubino Wave PM mini module is a Z-Wave 800 built-in module for current measurement. The module is designed for current measurement of devices such as lighting, sockets, heaters and other electrical appliances.
The module can be powered with a voltage of 110-240V AC. The maximum load capacity is 16A.
Features
Z-Wave 800 series
Maximum load capacity 16A
Supports over-the-air firmware updates (OTA)
S2 security and SmartStart suitableFormat 29x35x16 mmWire 0.5 to 1.5 mm²
The Shelly Qubino Wave Pro 1 is a Dinrail mountable Z-Wave 800 actor. The module is designed to operate 1 device such as lighting, fans, infrared panels, heaters and other electrical appliances. It is possible to operate the module wirelessly via Z-Wave, as well as using a (wall) switch.
The maximum load capacity is 16A.
Supported load types
Resistive (Ohms) – Incandescent, halogen, heaters
Capacitive – Electronic equipment with capacitors
Inductive (with RC Snubber) – LED lighting, LED drivers, air conditioning and fans
Attention! The switch-on peak of inductive loads such as LED lighting damages the relays. Use the RC Snubber to absorb this switch-on peak.
Features
Z-Wave 800
110-240VAC
Output 1x16ASwitch connection 2x
Protected against overload
Protected against overheating
Protected against voltage peaks
Built-in distribution box, DIN-RailManual
The Shelly Qubino Wave Pro 1PM is a Dinrail mountable Z-Wave 800 actor. The module supports active energy measurement and is designed to control 1 device such as lighting, fans, infrared panels, heaters and other electrical appliances. It is possible to operate the module wirelessly via Z-Wave, as well as using a (wall) switch.
The maximum load capacity is 16A.
Supported load types
Resistive (Ohms) – Incandescent, halogen, heaters
Capacitive – Electronic equipment with capacitors
Inductive (with RC Snubber) – LED lighting, LED drivers, air conditioning and fans
Caution! The switch-on peak of inductive loads such as LED lighting damages the relays. Use the RC Snubber to absorb this switch-on peak.
Features
Z-Wave 800
110-240VAC
Output 1x16ASwitch connection 2xCurrent measurement
Protected against overload
Protected against overheating
Protected against voltage peaks
Built-in distribution box, DIN rail
Manual
The Shelly Qubino Wave Pro 2 is a Dinrail mountable Z-Wave 800 actor. The module is designed to control 2 devices such as lighting, fans, infrared panels, heaters and other electrical appliances. It is possible to operate the module wirelessly via Z-Wave, as well as using a (wall) switch.
The maximum load capacity is 16A per channel and a combined maximum of 25A.
Supported load types
Resistive (Ohms) – Incandescent, halogen, heaters
Capacitive – Electronic equipment with capacitors
Inductive (with RC Snubber) – LED lighting, LED drivers, air conditioning and fans
Note! The switch-on peak of inductive loads such as LED lighting damages the relays. Use the RC Snubber to absorb this switch-on peak.
FeaturesZ- Wave800
110-240VAC
Output 2x16A, max 25A totalSwitch connection 2xProtected against overload
Protected against overheating
Protected against voltage peaks
Built-in distribution box, DIN-RailManual
The Shelly Qubino Wave Pro 2PM is a Dinrail mountable Z-Wave 800 actor. The module supports active energy metering and is designed to control 2 devices such as lighting, fans, infrared panels, heaters and other electrical appliances. It is possible to operate the module wirelessly via Z-Wave, as well as using a (wall) switch.The maximum load capacity is 16A per channel and a combined maximum of 25A.Supported load typesResistive (Ohmic) – Incandescent lamp, halogen, heating appliancesCapacitive – Electronic equipment with capacitorsInductive (with RC Snubber) – LED lighting, LED drivers, air conditioning and fansNote! The switch-on peak of inductive loads such as LED lighting damages the relays. Use the RC Snubber to absorb this switch-on peak.FeaturesZ-Wave 800110-240VACOutput 2x16A, max 25A totalSwitch connection 2xCurrent measurementProtected against overloadProtected against overheatingProtected against voltage peaks Built-in distribution box, DIN RailManual
The Shelly Qubino Wave Pro Shutter module is a Z-Wave 800 built-in module (DIN rail) for operating and accurately positioning 240VAC bi-directional motors. Ideal for control from central switch or distribution cabinets. The module supports active energy measurement and is designed for operating motorized curtains, blinds, screens, awnings and other motor-controlled solutions with electronic or mechanical limit switches. It is possible to control the module wirelessly via Z-Wave, as well as using a connected wall switch(es).
The module can be powered with a voltage of 110-240VAC. The maximum load capacity per output is a maximum of 16A. It can be operated with single or double wall switches.
In addition, the module is equipped with multiple protection functions, including protection against overheating, overvoltage and overcurrent.
Features
• Z-Wave 800 series
• Automatic calibration of endpoints
• Blind position support (tilt)
• Maximum load capacity: 16A
• Protected against overheating
• Supports over-the-air firmware updates (OTA)
• Can be used with different types of switches
The Shelly Qubino Wave Shutter module is a Z-Wave 800 built-in module for operating and accurately positioning 230VAC bi-directional motors. The module supports active energy measurement and is designed to operate motorized curtains, blinds, screens, awnings and other motor-controlled solutions with electronic or mechanical limit switches. It is possible to control the module wirelessly via Z-Wave, as well as using a connected wall switch(es).
The module can be powered with a voltage of 110-240VAC. The maximum load capacity per output is a maximum of 10A. It can be operated with single or double wall switches.
In addition, the module is equipped with multiple protection functions, including protection against overheating, overvoltage and overcurrent.
Features
• Z-Wave 800 series
• Automatic calibration of endpoints
• Blind position support (tilt)
• Maximum load capacity: 10A
• Protected against overheating
• Supports over-the-air firmware updates (OTA)
• Can be used with different types of switches
The Shelly Wave 1 LR is a Z-Wave 800 in-wall switch with one dry contact output. The module is designed for switching a wide range of electrical devices, such as lighting, electric locks, garage doors, gates, irrigation systems and other automation applications. Thanks to support for both traditional Z-Wave mesh and Z-Wave Long Range, the module is suitable for installations where extended wireless range is required.
The module can be powered with 110-240V AC, 24-48V DC or 12V DC and features a dry contact output. This allows the control voltage to differ from the voltage of the connected device, providing additional installation flexibility. The output supports loads up to 16A. In addition, the module is protected against overheating and supports secure communication via Z-Wave S2.
Features
Z-Wave 800 series with support for mesh and Long Range
Switch with dry contact output
Maximum load: 16A
Power supply: 110-240V AC, 24-48V DC or 12V DC
S2 Security (Authenticated/Unauthenticated)
SmartStart for quick and easy installation
Protected against overheating
Supports over-the-air firmware updates (OTA)
Can be used with different types of switches
Supports scenes and automations within Z-Wave systems
The Shelly Wave 1 Mini LR is a very compact Z-Wave 800 series module with a potential-free contact, designed to fit behind wall switches, power outlets, or in a surface-mount box. It can be used to control lighting, small appliances, garage doors, or security systems. Supports both classic Z-Wave mesh and Z-Wave Long Range for extended coverage. Features:
Potential-free contact (max. 8 A AC 230V / 5 A DC up to 30V)
Power supply 230V
Size 29 x 35 x 16 mm
Wire 0.5 to 1.5 mm²
Z-Wave 800 (mesh and Long Range) – selectable at inclusion
S2 security (Authenticated/Unauthenticated)
Low energy consumption (< 0.3 W)
Easy installation, compact size
SmartStart support for quick inclusion
The Shelly Wave 1PM LR is a compact Z-Wave 800 series switching module with integrated power metering, designed for installation behind wall switches, power outlets or inside electrical back boxes. The module enables smart control of lighting and other electrical loads up to 16A while accurately monitoring energy consumption. Thanks to support for both traditional Z-Wave mesh and Z-Wave Long Range, the module is suitable for standard installations as well as larger homes and buildings requiring extended coverage.Features Power supply 110-240V AC or 24-30V DCMaximum load 16AIntegrated power meteringZ-Wave 800 (mesh and Long Range) – selectable during inclusionSmartStart for quick and easy installationS2 Security (Authenticated/Unauthenticated)Protected against overheating and overloadSupports over-the-air firmware updates (OTA)Functions as a Z-Wave repeater in mesh networksDimensions 37x42x16 mmWire size 0.5 to 1.5 mm²
The Shelly Wave 1PM Mini LR is a very compact Z-Wave 800 series module with one switchable contact and power metering, designed to fit behind wall switches, power outlets or in a surface-mount box. It can be used to control lighting, small appliances, garage doors or security systems. Supports both classic Z-Wave mesh and Z-Wave Long Range for extended coverage.
Features
Power supply 230V
Maximum load 8A / 2000 watts
Protected against overheating
Z-Wave 800 (mesh and Long Range) – selectable at inclusion
S2 security (Authenticated/Unauthenticated)
Supports over-the-air firmware updates (OTA)
Size 29x35x16 mm
Wire 0.5 to 1.5 mm²
The Shelly Wave 2PM LR is a Z-Wave 800 in-wall switch with two independently controllable outputs and integrated power metering. The module is designed for controlling and monitoring devices such as lighting, fans, electric radiators, infrared panels and other electrical loads. Thanks to support for both traditional Z-Wave mesh and Z-Wave Long Range, the module is suitable for installations where extended wireless range is required.
The module can be powered with 110-240V AC or 24V DC, providing flexibility for various installations. Both outputs can switch loads up to 10A individually, with a maximum combined load of 16A. The integrated power metering allows accurate monitoring of the energy consumption of connected devices.
In addition, the module features several protection mechanisms, including overheating, overvoltage and overcurrent protection. The module also supports SmartStart for quick installation and secure communication via Z-Wave S2.
Features
Z-Wave 800 series with support for mesh and Long Range
Two independently controllable outputs with power metering
Maximum load per output: 10A
Maximum combined load: 16A
Power supply: 110-240V AC or 24V DC
S2 Security (Authenticated/Unauthenticated)
SmartStart for quick and easy installation
Protected against overheating, overvoltage and overcurrent
Supports over-the-air firmware updates (OTA)
Can be used with different types of switches
Supports scenes and automations within Z-Wave systems
The Shelly Wave Dimmer is a compact in-wall Z-Wave® dimmer for lighting, compatible with both mesh and Long Range topologies thanks to its Z-Wave 800 chipset. During inclusion, you can select either network type. You can connect 2 switches and control 1 output for dimmable lights up to 150 W (LED) / 200 W (halogen/incandescent). With a Shelly Bypass (sold separately), the Shelly Dimmer also supports 2-wire installations.
Key features:
Inputs: 2× switch/push-button via screw terminals
Outputs: 1× dimmable light output via screw terminals
Max load: LED up to 150 W, halogen/incandescent up to 200 W
Also suitable for 2-wire installations with Shelly Bypass (sold separately)
Network: Z-Wave mesh and Long Range – selectable during inclusion
Security: S2 (Authenticated/Unauthenticated), S0, Unsecure
Protection: internal protection against overheating (>95 °C), overcurrent (>0.9 A +15%) and overvoltage (>240 V +15%)
LED indicator: RGB LED for status and signals (includes LED mode for alarms)
OTA updates: supported via gateway
The Shelly Wave i4 DC LR is a Z-Wave 800 input module with four digital inputs, designed to trigger scenes and automations within a Z-Wave network. The module does not include relay outputs, but enables other Z-Wave devices to be controlled using conventional switches or push buttons. Thanks to support for both traditional Z-Wave mesh and Z-Wave Long Range, the module is suitable for installations where extended wireless range is required.
The Wave i4 DC LR can be powered with 5 to 24V DC and is suitable for low-voltage applications. The four inputs can be used to perform various actions, such as triggering scenes, controlling lighting or starting complex automations within a Z-Wave system. Multiple actions can be configured per input based on different button press patterns, such as single, double or long press.
The module supports SmartStart for quick installation and uses Z-Wave S2 security for secure communication within the network. Thanks to its compact size, the module can be installed behind existing switches or inside electrical back boxes.
Features
Z-Wave 800 series with support for mesh and Long Range
Four digital inputs for switches or push buttons
No relay outputs – designed exclusively for scene and automation control
Power supply: 5-24V DC
Supports single, double and long button presses
Supports multiple actions per input
SmartStart for quick and easy installation
S2 Security (Authenticated/Unauthenticated)
Supports over-the-air firmware updates (OTA)
Compact size for installation behind switches or in electrical back boxes
Low power consumption (< 0.3W)
The Shelly Wave i4 LR is a compact Z-Wave 800 series input module that can be installed behind an existing wall switch. The module has four digital inputs and is designed for activating scenes and automations via different click patterns. Supports both classic Z-Wave mesh and Z-Wave Long Range for extended coverage. Features:
4 digital inputs for control (single, double, long press and release)
Supports a total of 16 actions via multi-click
Z-Wave 800 (mesh and Long Range) – selectable at inclusion
S2 security (Authenticated/Unauthenticated)
Battery-free, low consumption (< 0.2 W)
Compact design, fits behind wall switch
Size: 37 x 42 x 16 mm
Power supply 230V
The Shelly Wave PM Mini LR is a very compact Z-Wave 800 series energy monitoring module, designed for measuring the energy consumption of electrical devices and circuits. Thanks to its compact size, the module can easily be installed behind wall switches, power outlets or inside electrical back boxes where installation space is limited. The module supports both traditional Z-Wave mesh and Z-Wave Long Range, making it suitable for installations where extended wireless range is required.
The Wave PM Mini LR does not feature a relay output and is intended exclusively for energy monitoring. This allows the energy consumption of connected devices or circuits to be accurately measured without switching the connected load. This makes the module suitable for applications where insight into energy usage is required, for example for energy management or detecting abnormal consumption.
The module is powered by 110-240V AC and supports loads up to 16A. In addition, the Wave PM Mini LR is equipped with several protection mechanisms, including overheating, overvoltage and overcurrent protection. SmartStart and Z-Wave S2 security ensure quick and secure integration within a Z-Wave network.
Features
Z-Wave 800 series with support for mesh and Long Range
Compact energy monitoring module without relay output
Suitable for accurate energy monitoring
Maximum measurement current: 16A
Power supply: 110-240V AC, 50/60Hz
Active energy monitoring
SmartStart for quick and easy installation
S2 Security (Authenticated/Unauthenticated)
Protected against overheating, overvoltage and overcurrent
Supports over-the-air firmware updates (OTA)
Low power consumption (< 0.3W)
Compact dimensions: 29 x 35 x 16 mm
The Shelly Wave Pro Dimmer 2PM is a DIN-rail-mounted dimmer. The module supports active energy measurement and is designed to dim 2 light sources. The Wave Pro Dimmer 2PM can be operated with 2 switches.
The smart dimmer works with Z-Wave, using a Z-Wave 800 chipset, and is compatible with Homey, Home Center 3, and other platforms such as Home Assistant and SmartThings. You can easily install the dimmer in your fuse box on a DIN rail, allowing you to dim 2 light sources with a maximum of 200 watts per channel.
Note! The dimmer does not yet have full support on the mentioned platforms. Check the current compatibility via the manual link below.Based on our own tests on the HC3, it seems possible to add the unit after several attempts, resulting in a usable endpoint for both channels. Note that the unit needs to be added in Singlechannel mode (see associations) and corrected.
Supported Light Sources
Incandescent bulbs
Dimmable LED and CFL
Dimmable electronic transformers
Features
110-240VAC
Z-Wave 800 chipset
Maximum 200 watts per channel (2 channels)
S2 security
Trailing edge
Power measurement
Overload protection
Overheat protection
Surge protection
Fuse box installation, DIN rail
19mm width
Manual
The Shelly Wave Pro 2PM LR is a professional DIN-rail module with two independent relays for switching and measuring power consumption per channel. The module supports a load of up to 16 A per channel (total 25 A) and enables precise power measurement for each circuit individually or combined. With Z-Wave Long Range support, it maintains a stable connection even over distances of up to 1 km (line of sight).
The Shelly Wave Pro 2PM LR features the latest Z-Wave 800 series chipset, making it energy-efficient and future-proof. Thanks to SmartStart inclusion and S2 Authenticated security, installation is quick and secure. Ideal for professional applications where reliability, monitoring and integration are key.
Features
Two independent relays (2 x 16 A, total 25 A)
DIN-rail mounting for distribution boxes
Supports Z-Wave Long Range up to 1 km (line of sight)
Dual frequency option: 864 MHz (Z-Wave LR) or 868.4 MHz (Z-Wave Plus)
Power metering per channel and combined
Latest Z-Wave 800 series technology
Easy installation with SmartStart
Secure communication via S2 Authenticated (AES-128)
Over-the-air firmware updates
Very low power consumption (< 0.3 W)
The Shelly Wave Pro Shutter is a professional DIN-rail module for automating roller shutters, blinds, curtains and other motorised shading systems. Integrated into the Z-Wave 800 platform, it provides reliable control, advanced power monitoring and enhanced security. The module supports precise positioning of shading (including slat angle control for blinds), works with both momentary and toggle switches, and remains operable locally even if the network is down. Thanks to SmartStart inclusion and S2 Authenticated security, installation is quick and secure. Features For DIN-rail mounting in distribution boxes (19 mm, 1 DIN module wide) Suitable for motors with bidirectional control (open/close) or slat adjustment Z-Wave 800 chipset – future-proof and energy-efficient Supports SmartStart inclusion and over-the-air firmware updates Power metering per channel – detailed insight into shading system consumption Protection against overheating, overcurrent and overvoltage Local control remains available via physical switch or push button Secure communication with S2 Authenticated (AES-128)
The Shelly Wave Shutter LR is a Z-Wave 800 in-wall module for controlling and accurately positioning motorized shading systems. The module is designed for applications such as roller shutters, blinds, screens, curtains and awnings with a 230V AC motor. Thanks to support for both traditional Z-Wave mesh and Z-Wave Long Range, the module is suitable for installations where extended wireless range is required.
The module supports precise positioning and allows connected shading systems to be automated and controlled remotely via a Z-Wave controller. In addition, the Wave Shutter LR features integrated power metering, providing insight into the energy consumption of the connected motor. For proper operation, it is recommended to use motors with electronic or mechanical limit switches.
The module can be powered with 110-240V AC or 24V DC and includes several protection mechanisms, including overheating, overvoltage and overcurrent protection. In addition, the module supports SmartStart for quick installation and secure communication via Z-Wave S2.
Features
Z-Wave 800 series with support for mesh and Long Range
Suitable for roller shutters, blinds, screens, curtains and awnings
Precise positioning control for motorized shading systems
Integrated power metering
Power supply: 110-240V AC or 24V DC
SmartStart for quick and easy installation
S2 Security (Authenticated/Unauthenticated)
Protected against overheating, overvoltage and overcurrent
Supports over-the-air firmware updates (OTA)
Can be used with different types of switches
Supports scenes and automations within Z-Wave systems
Please note: for proper operation, it is recommended to use motors with electronic or mechanical limit switches only.
The Aqara Camera Hub G350 Select is a 4K dual-lens smart camera with integrated Matter 1.5 controller and Zigbee hub. Thanks to the combined wide-angle and telephoto lens system, both complete rooms and specific details are captured with clarity. With 360° pan-tilt and 9x zoom, the camera provides full coverage and precise monitoring. The Aqara Camera Hub G350 features local AI detection for people, pets and other recognition functions, ensuring targeted and privacy-focused notifications. Footage can be stored locally on microSD or via NAS, with optional end-to-end encrypted cloud storage through HomeGuardian*. The camera integrates with Apple Home (HomeKit Secure Video), Google Home, Alexa, SmartThings and Home Assistant, making it suitable for professional and advanced smart home installations. * 3 months of HomeGuardian included with the Select version.Features
Dual-lens system with 4K wide-angle lens (3840 × 2160) and 2.5K telephoto lens (2560 × 1440) 9x zoom with smooth transition between wide-angle and telephoto 360° pan-tilt for full room coverage AI-powered auto-tracking of people and pets Local AI detection (people, animals, faces, sounds and gestures) Support for Apple Home (incl. HomeKit Secure Video), Google Home, Alexa, SmartThings and Home Assistant Matter 1.5 controller and integrated Aqara Zigbee hub Local storage via microSD (up to 512 GB) and NAS backup End-to-end encrypted cloud storage via HomeGuardian 940nm infrared night vision Dual-band Wi-Fi (2.4 GHz + 5 GHz) with WPA3
The Aqara Camera Hub G5 Pro (PoE) elevates outdoor cameras to a new level with advanced image quality, powerful AI recognition, and extensive smart home functionalities. This camera provides a solid and stable connection via Power over Ethernet (PoE), eliminating dependence on Wi-Fi and offering a reliable network for both data and power. With the built-in Zigbee hub, Matter Controller, and Thread Border Router, the G5 Pro is a versatile centerpiece for your smart home ecosystem.
Features
First Aqara Outdoor Camera Hub with Zigbee & Thread: Seamlessly integrate with the latest smart home ecosystems. The G5 Pro serves as a Matter Controller, Matter Bridge, and Thread Border Router, supporting both Aqara Zigbee and Thread devices as well as third-party Matter devices. Create local automations and easily connect with Apple Home, Alexa, and Google Home.
Advanced On-Device AI Recognition: With a built-in Neural Processing Unit (NPU), the camera recognizes faces, vehicles, people, and more. It also detects sounds like crying babies, barking dogs, and alarms. These features work locally, even without an internet connection, for reliable and smart automations.
True Full-Color Night Vision: The G5 Pro features an advanced 1/1.8” sensor and f/1.0 aperture for exceptional clarity in low-light conditions. With a built-in spotlight, this camera enhances visibility and deters intruders.
Maximum Privacy and Security: Enjoy full integration with HomeKit Secure Video and end-to-end encryption, ensuring your video streams are sent only where you want them to go. Additionally, the G5 Pro offers flexible storage options, including NAS, iCloud, and Aqara Cloud.
Exceptional PoE Connectivity: The Ethernet RJ45 port delivers data and power through a single cable, ideal for stable and extended connections. A USB-C port is also available for alternative power options.
Local Storage and RTSP Support: The 32 GB eMMC storage ensures reliable performance, while NAS and RTSP support enables seamless integration with NVRs, Home Assistant, and more.
Weatherproof Design: With an IP65 rating, the G5 Pro is suitable for use in extreme weather conditions ranging from -30°C to 50°C.
Note
This version does not support Wi-Fi and requires Ethernet cabling.
The G5 Pro does not support microSD cards.
The Aqara Camera Hub G5 Pro (Wi-Fi) combines advanced image quality, powerful AI recognition, and extensive smart home functionalities in one versatile camera. With wireless Wi-Fi connectivity and flexible installation options, this camera is perfect for anyone seeking convenience and reliability. The built-in Zigbee hub, Matter Controller, and Thread Border Router make it an ideal centerpiece for your smart home ecosystem.
Features
First Aqara Outdoor Camera Hub with Zigbee & Thread: Seamlessly integrate with the latest smart home ecosystems. The G5 Pro serves as a Matter Controller, Matter Bridge, and Thread Border Router, supporting both Aqara Zigbee and Thread devices as well as third-party Matter devices. Create local automations and easily connect with Apple Home, Alexa, and Google Home.
Advanced On-Device AI Recognition: With a built-in Neural Processing Unit (NPU), the camera recognizes faces, vehicles, people, and more. It also detects sounds like crying babies, barking dogs, and alarms. These features work locally, even without an internet connection, for reliable and smart automations.
True Full-Color Night Vision: The G5 Pro features an advanced 1/1.8” sensor and f/1.0 aperture for exceptional clarity in low-light conditions. With a built-in spotlight, this camera not only enhances visibility but also deters intruders.
Maximum Privacy and Security: Enjoy full integration with HomeKit Secure Video and end-to-end encryption, ensuring your video streams are sent only where you want. Additionally, the G5 Pro offers flexible storage options, including NAS, iCloud, and Aqara Cloud.
Powerful Dual-Band Wi-Fi Connectivity: The G5 Pro (Wi-Fi) supports both 2.4 GHz and 5 GHz Wi-Fi, ensuring better compatibility and less interference. The WPA3 standard provides extra security for your network. With the USB-C port (5V/2A), you can easily use a cable of the desired length for flexible and quick installation.
Local Storage and RTSP Support: The 32 GB eMMC storage ensures reliable performance, while support for NAS and RTSP enables seamless integration with NVRs, Home Assistant, and more.
Weatherproof Design: With an IP65 rating, the G5 Pro is suitable for use in extreme weather conditions, ranging from -30°C to 50°C.
Note
This version uses Wi-Fi and is not compatible with PoE (Power over Ethernet).
The G5 Pro does not support microSD cards.
The Aqara Curtain Driver E1 is a retrofit curtain controller with Zigbee 3.0. The device is easy to hang on the rail or the rod. Enjoy automatic control of the existing curtains based on the weather, time, temperature or other triggers. The Curtain Driver E1 has a powerful motor and can pull heavy curtains (up to 12kg). In addition, the device has an adjustable opening speed, so that the motor works more quietly or the curtain opens slowly. There is also support for device grouping, so you can open a window with two curtains at the same time with two Curtain Drivers. This is the official European version with CE approval and complies with the legal requirements.Two versions available: Track and Rod
The Curtain Driver E1 supports almost all curtain rails or rods.
Rod version: supports all types of rods
Track version: supports all U- and I-railsThe product has a built-in battery (6400 mAh) and can be charged via USB Type-C cable. The device can also be continuously supplied with power via this input. Note: For constant power supply, the cable must be placed freely to avoid tangling.
The battery life of the Curtain Driver E1 is on average 1 year. Actual life may vary depending on curtain weight, rail length and friction. Based on the following data, the Curtain Driver will work for about 9 – 10 months: a rail of 1.5 meters, a curtain with a weight of 12 kg, open and close once a day.
Compatible with popular smart home ecosystems through the Aqara Hubs, including HomeKit, Alexa, IFTTT and more. Matter support will be available via an OTA update via the Aqara Hubs.
Features
Zigbee 3.0
Maximum load of 12kg
Built-in rechargeable battery
USB Type-C for charging or constant power supply
Easy installation without additional tools
Support for adjustable opening speed and device grouping
Built-in light sensor for automatic control
All-round compatibility with all popular ecosystems via the Aqara hubs
The Aqara Curtain Driver E1 is a retrofit curtain controller with Zigbee 3.0. The device is easy to hang on the rail or the rod. Enjoy automatic control of the existing curtains based on the weather, time, temperature or other triggers. The Curtain Driver E1 has a powerful motor and can pull heavy curtains (up to 12kg). In addition, the device has an adjustable opening speed, so that the motor works more quietly or the curtain opens slowly. There is also support for device grouping, so you can open a window with two curtains at the same time with two Curtain Drivers. This is the official European version with CE approval and complies with the legal requirements.Two versions available: Track and Rod
The Curtain Driver E1 supports almost all curtain rails or rods.
Rod version: supports all types of rods
Track version: supports all U- and I-railsThe product has a built-in battery (6400 mAh) and can be charged via USB Type-C cable. The device can also be continuously supplied with power via this input. Note: For constant power supply, the cable must be placed freely to avoid tangling.
The battery life of the Curtain Driver E1 is on average 1 year. Actual life may vary depending on curtain weight, rail length and friction. Based on the following data, the Curtain Driver will work for about 9 – 10 months: a rail of 1.5 meters, a curtain with a weight of 12 kg, open and close once a day.
Compatible with popular smart home ecosystems through the Aqara Hubs, including HomeKit, Alexa, IFTTT and more. Matter support will be available via an OTA update via the Aqara Hubs.
Features
Zigbee 3.0
Maximum load of 12kg
Built-in rechargeable battery
USB Type-C for charging or constant power supply
Easy installation without additional tools
Support for adjustable opening speed and device grouping
Built-in light sensor for automatic control
All-round compatibility with all popular ecosystems via the Aqara hubs
A multifunctional dimmer switch with a rotary knob, designed for broad compatibility with both Zigbee and Matter over Thread support. Thanks to the Thread protocol, this dimmer seamlessly integrates with third-party ecosystems. It works with or without a neutral wire and is compatible with various lamp types, including incandescent, halogen, and dimmable LEDs and CFLs. Users can switch between dimmer modes based on different load types for optimal dimmer usage. Remote control, scheduling, power monitoring, and other features can be managed via the Aqara Home app.
Features
Thread & Zigbee support (Matter Controller, such as Hub M3, required for Matter over Thread support)
2-in-1 neutral for hassle-free installation
Multifunctional
Wide compatibility
System 55mm compatible
Energy monitoring
De Aqara Door and Window Sensor P2 is een sensor gebaseerd op Matter over Thread en detecteert openen en sluiten. Dankzij deze moderne communicatie standaard is de sensor direct compatibel met meerdere smart-home platformen en biedt hij een snelle en betrouwbare werking. De sensor wordt gevoed door een CR123A-batterij met een levensduur tot circa 2 jaar, waardoor onderhoud minimaal blijft. Met de meegeleverde plakstrips en magneetplaat kan de P2 eenvoudig en flexibel op vrijwel ieder kozijn worden bevestigd.
Kenmerken
Batterijgevoed (CR123A)
Controleer de open/dicht status
Matter over Thread
The Aqara Doorbell Camera G400 Select (Wired) is a continuously powered 2K video doorbell with support for PoE or 8–24V AC/DC power supply. Thanks to its fixed power connection, the camera operates 24/7 without battery replacement. With a vertical 3:4 aspect ratio and 165° viewing angle, both visitors and packages are fully captured. The Aqara Doorbell Camera G400 features local AI detection, intrusion zone detection and tamper protection. Footage can be stored locally on a microSD card or via NAS, with optional cloud storage through HomeGuardian*. The doorbell integrates with Apple Home, Google Home, Alexa, SmartThings and Home Assistant (RTSP/ONVIF), making it suitable for both residential and professional smart home installations. * 3 months of HomeGuardian included with the Select version.Main features:2K resolution (1536 × 2048) with 165° vertical viewing angle (3:4 aspect ratio) Choice of PoE (IEEE 802.3af) or 8–24V AC/DC power supply 940nm invisible infrared night vision Local AI detection (person, motion, configurable zones) Support for Apple Home (incl. HomeKit Secure Video), Google Home, Alexa, SmartThings RTSP and ONVIF support for integration with NVR or Home Assistant 24/7 continuous recording via microSD and NAS backup IP65 water and dust resistant Tamper alarm upon removal or manipulation Dual-band Wi-Fi 6 (2.4 GHz + 5 GHz)
The Aqara Doorbell Camera G410 combines a 2K video doorbell with smart detection and an integrated Zigbee and Thread/Matter hub. Thanks to mmWave radar, local face recognition, and end-to-end encrypted storage, this doorbell provides maximum security and privacy. Easily manage your lights, locks, and sensors via Aqara, Apple Home, Google Home, Alexa, SmartThings, or Home Assistant. With local storage, NAS support, and optional cloud storage via HomeGuardian*, your data is always protected.
* 3 months HomeGuardian cloud storage included with Select version.
Key features:
2K resolution with 175° wide-angle and f/1.8 lens
Built-in Zigbee and Matter hub for Aqara and third-party devices
Supports Apple Home (incl. HomeKit Secure Video), Google Home, Alexa, and more
Local storage (microSD/NAS) and encrypted cloud via HomeGuardian
mmWave radar and local face recognition with no subscription required
95 dB chime with customizable alerts and USB-C power
Operates on batteries or wired power (2-in-1)
Dual-band Wi-Fi (2.4 GHz + 5 GHz) with WPA3 security
Privacy masking, voice changing, and direct control from the doorbell interface
The Hub M3 is a versatile Hub that can be used in various ways. The following protocols are in place; Zigbee 3.0, Thread, Bluetooth, Infrared and Wifi 2.4 and 5Ghz.
As an Aqara Hub, it is suitable for connecting and automating Aqara Zigbee 3.0 and Aqara Thread products. Bluetooth is used to detect and easily connect products via Thread. The infrared blaster can be used for teaching and controlling devices and has a special infrared air conditioning integration and both can be used as a Matter device (a Matter profile must be available).
The Hub M3 also has a speaker with customizable ringtones and a maximum volume of 95dB. The perfect addition to your alarm system or Aqara G4 doorbell.The integration of Thread products from other manufacturers is possible. But a required profile may be missing.The Hub M3, like other Aqara products, can be linked to Google Home, Alexa and has a very extensive link to Homekit. As a Matter - Thread Border router, a link to a Matter network is also available. This makes it possible to connect Aqara Zigbee 3.0 devices to Matter.
Furthermore, Aqara focuses on local service with the Hub M3. Automations continue to function locally even if the internet is lost. Thanks to special ARK technology, when multiple Hub M3s are used, this Thread functionality will be taken over by another Hub M3 if the 'master' disappears.
Both 2.4 and 5GHz can be used for the installation. Furthermore, the Hub M3 has an RJ45 network port that is also POE suitable. This makes the Hub M3 easier to install in places where there is no immediate 230v supply. In addition to POE, the Hub M3 can be powered via a USB-C connector (5v 2A)
FeaturesZigbee 3.0 (Aqara) Thread Border routerMatterBluetooth (for connecting Thread devices)Wifi 2.4 and 5 GhzLAN RJ45 POE< /li>Power supply via POE or USB-C 5v 2AInfrared blaster 360 degrees (with learn-in function)Homekit suitable
The Aqara LED Lamp T2 E27 offers versatile lighting for any space in the home. This smart LED lamp combines functionality with style, making it suitable for various applications and connectable via both Thread and Zigbee.
Available in CCT and RGB CCT variants for high-quality white light with a RA >90. Ideal for work and productive moments, as well as customizable colors to easily create the perfect ambiance, from calming to festive.
Compatible with Apple HomeKit Adaptive Lighting.
CCT stands for Correlated Color Temperature, allowing the lamp to provide adjustable white light between 2700 and 6500K.
CCT&RGB can achieve a color temperature between 2000 and 9000K with 16 million colors.
Key Features:
Support for Zigbee and Thread
Supports up to 5 Matter ecosystems
Power-off memory
Compatible with Apple HomeKit Adaptive Lighting
CCT 2700-6500K
CCT&RGB 2000-9000K with 16 million colors
Energy-efficient design: Ultra-low power consumption in standby mode.
Smart home integration: Compatible with various smart platforms for seamless control.
Long-lasting durability: Designed for longevity and reliable performance.
Flexible usage: Adjust the lighting to your preferences via an app, voice control, or automated scenes.
The Aqara LED Lamp T2 GU10 offers versatile lighting for any space in the home. This smart LED lamp combines functionality with style, making it suitable for various applications and is connectable via both Thread and Zigbee.
Available in CCT and RGB CCT variants for high-quality white light with a RA >90. Ideal for work and productive moments, as well as customizable colors to easily create the perfect ambiance, from calming to festive.
Compatible with Apple HomeKit Adaptive Lighting.
CCT stands for Correlated Color Temperature, allowing the lamp to provide adjustable white light between 2700 and 6500K.
CCT&RGB can achieve a color temperature between 2000 and 9000K with 16 million colors.
Key Features:
Support for Zigbee and Thread
Supports up to 5 Matter ecosystems
Power-off memory
Compatible with Apple HomeKit Adaptive Lighting
CCT 2700-6500K
CCT&RGB 2000-9000K with 16 million colors
Energy-efficient design: Ultra-low power consumption in standby mode.
Smart home integration: Compatible with various smart platforms for seamless control.
Long-lasting durability: Designed for longevity and reliable performance.
Flexible usage: Adjust the lighting to your preferences via an app, voice control, or automated scenes.
The Aqara Light Switch H2 EU is a smart switch based on Matter over Thread and Zigbee, offering versatile control and extensive compatibility. This switch can control not only lighting but also other devices easily through automations. Available in 2-button (1 relay) and 4-button (2 relays) variants.
Key Features:
Compatible with 55 mm system frames: Easy to install in existing systems.
Flexible installation options: Supports wiring with or without a neutral wire.
For installations without a neutral wire, the light source must be at least 5 watts for proper operation.
Configurable buttons for switching internal relays and activating automations.
The 2-button variant can directly control 1 light source.
The 4-button variant can directly control 2 light sources.
Advanced Functionalities:
Remote control and scheduling: Control your lighting from anywhere and set schedules.
Energy monitoring: Keep track of the power consumption of connected devices.
Wireless switching function: Wirelessly switch between different modes.
Reliable smart connections: MARS-Tech technology significantly improves the reliability of connections with Aqara devices.
The Aqara Motion and Light Sensor P2 is a battery powered Thread & Matter sensor for detecting movement and measuring light intensity. It allows users to connect the sensor directly to a Thread Border router from other manufacturers.The Motion Sensor has a detection arc of 170 °. Moreover, thanks to the versatile 360-degree position, the sensor can be placed anywhere. Important: The Aqara Motion and Light Sensor P2 only works with a Thread Border Router. The P2 Sensor is not compatible with the current Aqara Zigbee hubs and Aqara Home App. The Aqara Border Router M3 is expected later in 2024.Matter supportWith Matter, users do not have to worry worry more about different ecosystems and technical protocols. All it takes is a Matter-compatible app and a Thread Border router that supports Matter, resulting in a simplified connection between ecosystems and platforms. Additional features in the Aqara Home AppThe P2 sensor has extensive local parameter settings that are available via the Hub M3. Users can, among other things, fine-tune the sensitivity and detection zone of the sensor.FeaturesBattery powered (CR2450 2x standard included)Motion sensorLight sensorConfigurable time-out detection (via M3 hub)Extra wide field of view< li>Customizable sensitivity (via M3 hub)All-round compatibility with all popular ecosystems
The Aqara Power Plug H2 EU is a smart plug designed to automate, monitor and upgrade traditional electrical devices within modern smart home installations. Thanks to support for both Thread and Zigbee, the plug offers flexibility for Matter ecosystems as well as access to advanced Aqara features.
In Thread mode, the plug can connect directly to Matter ecosystems such as Apple Home, Google Home, Alexa and SmartThings without requiring an Aqara hub. In Zigbee mode, additional Aqara features become available, including energy visualization, advanced automations, security functions and compatibility with existing Aqara Zigbee hubs.
With support for power monitoring, smart automations and automatic shut-off, the Aqara Power Plug H2 EU helps users gain insight into energy consumption and reduce standby power usage. Devices such as coffee machines, televisions, chargers and washing machines can be automated based on schedules, presence detection or realtime power consumption.
The compact housing is designed to avoid blocking adjacent wall outlets in most situations. In addition, the plug features multiple safety protections including overheating protection, overload protection and child lock functionality for added safety in homes and professional installations.
The integrated RGB LED indicator can be used within Aqara automations for visual energy feedback and can also be controlled independently via Matter as a smart ambient light.
Features:
Smart plug with Thread, Zigbee and Bluetooth support
Supports Matter integration via Thread without requiring an Aqara hub
Zigbee mode unlocks additional Aqara features and automations
Compatible with Apple Home, Google Home, Alexa, SmartThings and Home Assistant
Realtime power monitoring and energy usage insights
Supports automatic shut-off based on low power consumption
Suitable for automations based on schedules, presence and energy usage
RGB LED indicator for status display and energy visualization
RGB LED can be controlled independently via Matter
Compact design that generally keeps adjacent outlets accessible
Supports loads up to 3680W / 16A
Overload and overheating protection
Child lock functionality for additional safety
Supports local automations within Aqara ecosystems
Suitable for smart lighting, chargers, coffee machines, televisions and other devices
Note: A compatible Thread Border Router and Matter Controller are required for use within Matter ecosystems. A compatible Aqara hub is required for advanced Aqara and Zigbee functionalities.
The Aqara Presence Multi-Sensor FP300 is an advanced battery-powered presence sensor featuring dual detection technology based on PIR and mmWave radar. With built-in AI, the sensor recognizes subtle movements and prevents false absence reports. The FP300 supports both Thread and Zigbee and includes additional sensors for light, temperature and humidity, providing enhanced control, comfort and efficiency in any smart home installation.
The FP300 combines high detection accuracy with long battery life. Thanks to its energy-efficient dual-sensing technology, two CR2450 batteries can last up to 3 years in Zigbee mode and up to 2 years in Thread mode. The sensor can be easily mounted on walls, ceilings or metal surfaces using the included multi-axis bracket. Its compact and discreet design fits seamlessly into any environment, while intelligent software ensures reliable detection without interference from pets, curtains or fans.
Features
Accurate AI-powered detection using dual PIR and 60GHz mmWave technology
Detects even minor movements and prevents false absence reports
Five integrated sensors: PIR, mmWave, light, temperature and humidity
Wide 120° field of view with up to 6 meters detection range
Energy-efficient design with up to 3 years battery life (Zigbee) or 2 years (Thread)
Operates via Zigbee or Thread – compatible with Matter ecosystems and Aqara Hubs
Fully configurable in Zigbee mode via the Aqara Home app
Flexible mounting with the included multi-axis bracket (wall, ceiling, magnetic or corner installation)
Compact design that blends into any interior
Supports local automations and third-party Matter devices
Disclaimers
Battery life is based on tests conducted by the Aqara Laboratory. Actual results may vary depending on settings, connected ecosystems and environmental conditions.
Zigbee mode and an Aqara Hub are required to enable or disable individual sensors.
To use with a Matter ecosystem, a Thread-enabled Matter Controller of that ecosystem is required.
An Aqara Zigbee Hub is required for operation in Zigbee mode.
The Aqara Roller Shade Driver E1 is a retrofit roller blind controller. The device is easy to install and works with existing roller blinds via the beaded cord. The Roller Shade Driver must be mounted on the wall with 2 screws. The product has a built-in battery and can be charged via a USB Type-C cable. The device can also be continuously supplied with power via this input. This concerns the official European version with CE approval and meets the legal requirements. Features Accurately positionable with calibration method Stepless operationEasy installation for operating roller blinds via the bead cord4 adapters supplied as standard for different bead cordsTwo physical buttons for direct operation2-month battery lifeUSB Type-C for charging or constant power supplyAll-round compatibility with all popular ecosystemsVoice control via HomeKit, Alexa, Google Assistant and IFTTT
The Aqara U200 lock is a high-quality smart lock that comes with an outer panel (keypad). This means you can open the lock not only via an app, but also with a fingerprint, a (temporary) PIN code, NFC, Apple Home Key or via a voice assistant. Moreover, if necessary, you can always insert the key into the lock to open it. Aqara integrates the U200 lock with the Aqara G4 doorbell in the Aqara app for easy access control.Other features include a silent mode for silent closing, automatic closing and a function that helps turn the lock (turn the lock a little and it opens and closes automatically).The U200 can connect via Bluetooth or Thread (Matter). Remote control requires a Matter Hub (Thread). To use the Apple Home Key, a HomeKit Thread hub is required, such as an Apple HomePod or an Apple TV.The U200 is suitable for most Euro cylinders. Due to the dimensions of the lock, a distance from the edge of the door to the center of the Euro cylinder of 55mm is required for inward opening doors and 35mm for outward opening doors. When using a key, it may protrude a maximum of 39mm and have a maximum thickness of 5mm. The best connection method is with a protruding cylinder, so that you can clamp it with the screws of the mounting plate.Several adapters are supplied as standard for use with cylinders with a rotary knob. Please note that the protruding part can be a maximum of 20mm; otherwise the adapters will not fit. For more information about the mounting options, read
manual.Features
You can open the door via several methods: Fingerprint, (temporary) PIN code, NFC, Apple Home key, Voice assistant, Via hub (thread) remotely, Via app (Bluetooth) locally or old-fashioned with the Key (with a suitable cylinder).Battery (rechargeable) usage time of 6 months with a maximum of 8 movements per day.
Bluetooth and Matter (Thread)
Hub (Thread) required for remote control (Aqara Hub M3 or Homepod or Apple TV)
Various adapters included for use with knob cylinderFixing materials included
Lock has a size of 62.3 x 60.6 x 152.5mm
Includes keypad for fingerprint, NFC and PIN code.
Keypad can be up to 2 meters away from the lock
Keypad works on 4x AAA or 8-24V DC
Keypad has a size of 42.7 x 33 x 146 mm
Keypad has an IPX5 rating (suitable for outdoor use)
The Aqara U200 lock is a high-quality smart lock that comes with an outer panel (keypad). This means you can open the lock not only via an app, but also with a fingerprint, a (temporary) PIN code, NFC, Apple Home Key or via a voice assistant. Moreover, if necessary, you can always insert the key into the lock to open it. Aqara integrates the U200 lock with the Aqara G4 doorbell in the Aqara app for easy access control.Other features include a silent mode for silent closing, automatic closing and a function that helps turn the lock (turn the lock a little and it opens and closes automatically).The U200 can connect via Bluetooth or Thread (Matter). Remote control requires a Matter Hub (Thread). To use the Apple Home Key, a HomeKit Thread hub is required, such as an Apple HomePod or an Apple TV.The U200 is suitable for most Euro cylinders. Due to the dimensions of the lock, a distance from the edge of the door to the center of the Euro cylinder of 55mm is required for inward opening doors and 35mm for outward opening doors. When using a key, it may protrude a maximum of 39mm and have a maximum thickness of 5mm. The best connection method is with a protruding cylinder, so that you can clamp it with the screws of the mounting plate.Several adapters are supplied as standard for use with cylinders with a rotary knob. Please note that the protruding part can be a maximum of 20mm; otherwise the adapters will not fit. For more information about the mounting options, read
manual.Features
You can open the door via several methods: Fingerprint, (temporary) PIN code, NFC, Apple Home key, Voice assistant, Via hub (thread) remotely, Via app (Bluetooth) locally or old-fashioned with the Key (with a suitable cylinder).Battery (rechargeable) usage time of 6 months with a maximum of 8 movements per day.
Bluetooth and Matter (Thread)
Hub (Thread) required for remote control (Aqara Hub M3 or Homepod or Apple TV)
Various adapters included for use with knob cylinderFixing materials included
Lock has a size of 62.3 x 60.6 x 152.5mm
Includes keypad for fingerprint, NFC and PIN code.
Keypad can be up to 2 meters away from the lock
Keypad works on 4x AAA or 8-24V DC
Keypad has a size of 42.7 x 33 x 146 mm
Keypad has an IPX5 rating (suitable for outdoor use)
The Aqara Smart Plug has been developed for switching connected electrical devices. The Smart Plug works with Zigbee 3.0. The intermediate plug is suitable for switching max. 10A (2,300W) and is equipped with an active energy measurement function. This means that the device consumes more power from the connected device. The device is also equipped with protection against overheating and overload.
The Smart Plug has plug type F (grounded) and has an input for grounding pin at the rear.
The Smart Plug can be used with a timer (via a Zigbee Hub) to automatically switch devices.
Compatible with popular smart home ecosystems through the Aqara Hubs, including HomeKit, Alexa, IFTTT and more.
This is the official European version with CE approval and meets the legal requirements.
Features
Zigbee 3.0
Active energy metering
Physical button for local control
Protection against overload and overheating
All-round compatibility with all popular ecosystems through the Aqara hubs
Protect your home with the Aqara Smoke Detector, a smart smoke detector that combines safety and convenience.FeaturesZigbee 3.0Matter over bridge support (with a compatible Aqara Hub)Up to 10 years battery lifeReplaceable battery: DC 3V (CR17450)Size ⌀104.6 × 42 mmGrouping possible: if one detector triggers, others will respond as well
The Aqara Spatial Multi-Sensor FP400 is an advanced presence sensor with 60GHz mmWave radar for accurate detection in large spaces. The sensor can simultaneously track up to 10 people and divide the room into up to 8 separate detection zones. This allows lighting, climate control and other smart home devices to be controlled based on the location of people in the room.
Local AI filtering reduces false detections caused by pets, robot vacuum cleaners and moving objects. With a detection range of up to 8 × 10 metres, a wide field of view and flexible installation on a wall, in a corner or on the ceiling, the FP400 is suitable for homes, offices and other professional applications. The integrated light sensor also enables automations based on presence and ambient light.
The FP400 supports both Zigbee and Thread and can be integrated with Apple Home, Google Home, Amazon Alexa, SmartThings and Home Assistant via Matter. The sensor is continuously powered via USB-C and has an IPX5 rating for use in damp indoor areas.
Features
60GHz mmWave radar for accurate presence detection
Detects and tracks up to 10 people simultaneously
Divides the room into up to 8 separate detection zones
Accurate zone configuration with a 0.5-metre grid
Detection range of up to 8 × 10 metres
120° horizontal and 100° vertical field of view
Local AI filtering reduces false detections
Integrated ambient light sensor
Supports Zigbee and Thread
Matter integration via Thread
Compatible with Apple Home, Google Home, Alexa, SmartThings and Home Assistant
Flexible installation on a wall, in a corner or on the ceiling
Adjustable sensitivity and absence delay
Privacy-friendly detection without a camera
IPX5 water-resistant
Continuous power via USB-C
Dimensions: 64 × 64 × 29.5 mm
Power supply: 5 V/1 A
Disclaimers
A compatible Matter Controller and Thread Border Router are required for use within a Matter ecosystem. A compatible Aqara Zigbee hub is required for use in Zigbee mode. The availability of detection zones, people counting and other advanced functions may vary depending on the ecosystem. A USB-C cable is included. A power adapter is not included.
The Aqara Temperature and Humidity Sensor T1 is a compact sensor with a built-in temperature, air pressure and relative humidity sensor. The sensor runs on a CR2032 battery and communicates via Zigbee.
With the sensor you can monitor air quality, register data, receive notifications and create automations. The sensor records the temperature between -20℃ and +50℃ in steps of ±0.3℃. The humidity between 0% and 100% with an accuracy of ±3%. The air pressure between 30 kPa and 110 kPa with an accuracy of ±0.12 kPa.
The T1 version is the successor to the previous generation and has several improvements, including Zigbee 3.0 and OTA support. This is the official European version with CE approval and meets the legal requirements.
Compatible with popular smart home ecosystems through the Aqara Hubs, including Matter, HomeKit, Alexa, Google Home, IFTTT and more. In addition, the sensor is also directly compatible with SmartThings via the Aeotec Smart Home Hub.
Compared to the previous generation, the T1 version also has support for Over-The-Air (OTA) updates. This is only possible in combination with an Aqara hub.
Features
Communication via Zigbee 3.0
Works on a battery (CR2032)
Monitor air quality with the compact sensor
Compatible with popular smart home ecosystems via the Aqara Hubs, including Matter, HomeKit, Google Home, Alexa, Homey Pro and more.
Support for OTA updatesHomey Pro: Compatible from version 1.8.2
The Aqara Water Leak Sensor T1 is a compact water detector. The sensor runs on a battery (CR2032) and communicates via Zigbee 3.0. With the sensor you monitor a surface/space, the device detects water at a layer of 0.5mm (flat surface). In addition, the sensor has an IP67 rating, which means that the sensor is guaranteed to function in humid and dusty environments.
The T1 version is the successor to the previous generation and has several improvements, including Zigbee 3.0 and OTA support. This is the official European version with CE approval and meets the legal requirements.
Compatible with popular smart home ecosystems through the Aqara Hubs, including Matter, HomeKit, Alexa, Google Home, IFTTT and more. In addition, the sensor is also directly compatible with SmartThings via the Aeotec Smart Home Hub.
Compared to the previous generation, the T1 version also has support for Over-The-Air (OTA) updates. This is only possible in combination with an Aqara hub.
Features
Communication via Zigbee 3.0
Works on a battery (CR2032)
Monitor the room with the compact sensor
Compatible with popular smart home ecosystems via the Aqara Hubs, including Matter, HomeKit, Google Home, Alexa, Homey Pro and more.
Support for OTA updatesHomey Pro: Compatible from version 1.8.2
The frient keypad is a universal control for access to the home. Commonly used applications include switching the alarm on and off. But because the keypad can also be mounted outside, you can also use it, for example, to activate a smart lock to close/open. The keypad has a backlight and will light up when it is dark and the keypad is approached.Do you want to know whether your Hub is compatible with frient? Then click hereFeaturesZigbee 3.0RFID (ISO14443A and MIFARE classic)0-9 digits and 6 functions buttonsSuitable for outdoor and indoor useSetting via the Hub (see list of compatible hubs)4x AA batteriesLifespan batteries is 12 months with normal useDetection of people at a distance of 5-10 cmDetection interval 500msFormat 90 x 90 x 22 mmManual
With the frient IO module you can make wired devices an integral part of your smart home. Easily connect your devices to the inputs to trigger automated actions on specific events. Connect them to the outputs to make devices respond smartly to triggers in your home. Create a seamless, smart living experience by integrating traditional appliances with modern technology.Want to know if your Hub is compatible with frient? Then clickhereFeaturesZigbee 3.0Power supply 6-28 Volt DC (direct voltage)Input: 4x potential-free ( normally open or normally closed)Output: 2x contact for on/off/pulse Output maximum 30 Volt and maximum 1 Ampere for both outputsFormat 45 x 45 x 16 mmIP20Zigbee routerManual
The frient smart cable is an electricity meter and a remote on/off switch for mounting in the connection cable of your device. With the smart cable you can switch the device on and off via your smartphone or automate it in your home automation solution for more convenience.Do you want to know if your Hub is compatible with frient? Then click hereFeaturesZigbee 3.0IP30Maximum 16 Ampere Reporting per 1 watt230 voltFormat 36 x 108 x 24 mmManual
With the Smart Plug Mini 2 you can remotely control and automate your appliances and track their electricity consumption - all in one. It is a small but versatile Zigbee adapter that connects your devices to your smart home. All you have to do is plug it into a wall socket and connect your electrical appliance. Simple, right?
This product is type E with pin earth, mainly used in Belgium and FranceDo you want to know whether your Hub is compatible with frient? Then click hereFeaturesZigbee 3.0IP40Type E (FR)Current meter 207-253 volts with a resolution of 1 WattMaximum 10 Ampere continuous loadPeak load 16 AmpereFormat Ø41 X 45 mmManual
The wireless air quality sensor monitors the amount of organic chemicals (VOC) in the indoor air, the humidity level and the temperature in the room. The friendly Zigbee sensor runs on batteries and warns you if the indoor air quality becomes poor.
Do you want to know if your Hub is compatible with frient? Then click hereFeaturesZigbee 3.0VOC sensor 0 - 60,000 ppbVOC resolution 1-32 ppbTemperature sensor (0-50 degrees)Temperature resolution 0.2 degrees every 30 secondsHumidity (0-100% relative humidity) Humidity resolution 2%2x AA batteriesFormat 70 x 70 x 21 mmBattery life expectancy is 2 years (with notifications every 5 minutes)**lifetime depends on the mesh network, settings and the location where it is installed. Manual
Track your power consumption and discover when there are peaks, so you can reduce your consumption and become energy conscious. This frient LED meter is connected to your electricity meter by reading the flashing LED on the front of the meter and keeps you informed of your consumption on your smartphone via a compatible hub. You can easily install this electricity meter yourself.
Do you want to know if your Hub is compatible with frient? Then click hereFeatures
Zigbee 3.0
2x AA batteryFormat 65 x 95 x 24 mm
Sensor size 26 x 29 x 12 mmIP22Battery life expectancy is 2 years (with notifications every 5 minutes)*Reading meter via LED signal (adjustable for pulses of 50-10,000 per kWh)*lifespan depends on the mesh network, settings and the location where it is installed.Manual
The frient heat alarm monitors high heat levels and warns you if a fire is detected.In areas where particles are in the air such as a dusty storage room or in the kitchen where fumes can settle on normal smoke detectors, there is a chance of false alarms. The Heat Alarm does not respond to particles but will respond quickly to rising temperatures associated with fire and immediately warns the wireless alarm. You will hear loud beeps and receive a notification, so you can take immediate action. The heat alarm runs on batteries and is easy to install.Do you want to know if your Hub is compatible with frient? Then click hereFeaturesZigbee 3.0Battery CR123A
Battery life expectancy is 5 years (with notifications every 5 minutes)*
Format is Ø 65 mm and 40 mm high.
IP20
Alarm 85 dB/3m
Sensor for heatTemperature sensor works between 0 and 50 degrees Celsius.
Resolution temperature sensor is 0.1°C (margin ± 0.5°C)
*lifetime depends on the mesh network, settings and the location where it is installed. Manual
The frient smoke detector helps protect your home against fire, wherever you are. This Zigbee 3.0 smoke detector detects smoke and can measure temperature. The built-in siren has a volume of 85 dB/3m, so an alarm will not go unnoticed. Do you want to know whether your Hub is compatible with frient? Then click hereFeaturesZigbee 3.0Battery CR123A
Battery life expectancy is 3 years (with notifications every 5 minutes)*
Format is Ø 65 mm and 40 mm high.
IP20
Optical sensor for smokeAlarm 85 dB/3m
Sensor for temperatureTemperature sensor works between 0 and 50 degrees Celsius.
Resolution temperature sensor is 0.1°C (margin ± 0.5°C)
*lifetime depends on the mesh network, settings and the location where it is installed.
Manual
With the pet-friendly motion sensor Motion Sensor 2 Pet you can detect movement and use it for automations in your smart home. The motion sensor is also equipped with a Lux and temperature sensor.Do you want to know whether your Hub is compatible with frient? Then clickhereFeaturesZigbee 3.0Battery 2x AABattery life expectancy is 3 years (with notifications every 2 minutes)*
IP20Size 70 x 70 x 37 mmCan detect movement up to 9 meters awayViewing angle 45 degrees left and right, above and belowBlind time configurable via the hub (2s to 65,000s) Please note, check the list for a suitable hub.Light sensor reporting: dark, normal and bright< /li>Pet friendly: detects >50Kh and ignores <25Kg at floor level (<1m)*lifetime depends on the mesh network, settings and location it is installed.Manual
The Motion Sensor Pro is a smart device that can detect movement, light, and temperature. The detector is designed to help you get through the day, your way. When you are away, the sensor keeps an eye on your house. Use the friendly sensor to keep an eye on your loved ones – no matter where you are. At home, the Zigbee sensor helps you automate your daily routines and increase convenience in your daily life.
Do you want to know if your Hub is compatible with frient? Then click hereFeaturesZigbee 1.2Battery 2x AaFormat 70 x 70 x 21mmIP30Battery life expectancy is 3 years (with notifications every 2 minutes)*Can detect motion up to 9 meters away
Viewing angle 45 degrees left and right, top and bottom
Blind time configurable via the hub (2s to 65,000s) Please note, check the list for a suitable hub.
Light sensor reporting: dark, normal and brightTemperature sensor 0-50 degreesm (per 0.5 degrees)* lifespan depends on the mesh network, settings and the location where it is installed.Manual
The Zigbee Range Extender repeats the signal within your Zigbee network and allows you to add more Zigbee devices to your smart home. This device is easy to install. All you have to do is plug it in and connect the device to your smart home hub. With the included backup battery, you never have to worry about dropped connections.
Do you want to know if your Hub is compatible with frient? Then clickhereFeaturesZigbee 3.0Improve the coverage of your Zigbee mesh networkSize 46 x 119 x 23 mm IP20230V , 0.4WattCable for power supply connectionManual
With the frient Zigbee Smart Button you can control your home with one simple push of a button. Set up scenarios for your home and use the button to turn off all the lights from your bed or activate an "I'm home" program when you step through the door.
Do you want to know if your Hub is compatible with frient? Then clickhereFeaturesZigbee 3.0Format 40 x 53 x 10.8mmBattery CR2450 Battery life expectancy is 5 years (with notifications every 5 minutes)*1 push button*lifetime depends on the mesh network, settings and the location where it is installed.Manual
With the Smart DIN relay that can be mounted on a Dinrail, you can switch a group or device from a central point. You can monitor the consumption of this group or device with the built-in energy meter.Do you want to know whether your Hub is compatible with frient? Then click hereFeaturesZigbee 3.0Din rail mountable (1 width)Format 65 x 90 x 17.5 mm230VoltMaximum 16 AmpereIP30Current measurement (1 watt resolution)Manual
With the Smart Plug Mini 2 you can remotely control and automate your appliances and track their electricity consumption - all in one. It is a small but versatile Zigbee adapter that connects your devices to your smart home. All you have to do is plug it into a wall socket and connect your electrical appliance. Simple, right?This product is type F with protective earth, not for use in Belgium and FranceDo you want to know whether your Hub is compatible with frient? Then click hereFeaturesZigbee 3.0IP40 Type F (Earth)Current meter 207-253 volts with a resolution of 1 Watt Maximum 10 Ampere continuous loadPeak load 16 AmpereFormat Ø41 X 45 mm Manual
The Smart Siren is a mains powered device with a siren and range extender in one. The smart home siren makes loud sounds to deter intruders from entering your home. With range extender functionality, the Smart Siren allows your smart home system to cover a larger area so you can add more devices. Due to the built-in backup battery, this siren will still sound when the power supply is disconnected.Do you want to know whether your Hub is compatible with Frient? Then click hereFeatures Zigbee 3.0Loose cable for power supplyIP20 Power supply 230v, 0.4 wattSiren 90dBm @ 1meterBack-up battery (not replaceable)Manual
De Frient Vibration Sensor detecteert trillingen, schokken en kantelingen. Bevestig de sensor op een raam, deur of object en ontvang direct een melding bij activiteit.KenmerkenTrillings-, schok- en kanteldetectieDraadloos en eenvoudig te installerenBatterijgevoed met lange levensduurZigbee 3.0 compatibelOndersteunt real-time meldingenDe Frient Vibration Sensor werkt met Zigbee 3.0 en is compatibel met diverse smart home systemen. Koppel de sensor aan een hub en stel automatiseringen in, zoals het inschakelen van een alarm of verlichting bij detectie.Wil je weten of jouw Hub compatibel is met frient? Klik dan hier
Place the Frient water leak detector on the floor in any room where there is a risk of leakage or flooding, and you can be assured that it will respond immediately when detecting water. The Zigbee leak detector warns you with a loud alarm and sends a notification to your device. Feel peace of mind knowing that this reliable helper is always watching over your home, even when you're not there. The water leakage detector runs on batteries and is easy to install. In addition to detecting water, the sensor also has a temperature sensor.Do you want to know whether your Hub is compatible with frient? Then click hereFeaturesZigbee 3.0Battery CR123ABattery life expectancy is 5 years (with notifications every 5 minutes)*Format is Ø 60 mm and 37 mm high.IP20Alarm 85 dB/3mSensor for leaks and temperatureTemperature sensor works between 0 and 50 degrees Celsius.Resolution temperature sensor is 0.1°C (margin ± 0.5°C)*lifespan depends on the mesh network, settings and the location where it is installed.Manual
The frient Water Leak Detector Probe is an accessory for use together with the Water Leak Detector.Features Format is Ø 50 x 8.5 mmCable length is 900mm
Give any room a vibrant touch with the 4-metre Govee Neon Strip. Shape recognition technology makes adjustment easy, while improved clamps simplify bending and creating the desired shape. Illuminate your space with this versatile and dynamic lighting option.FeaturesNot for outdoor useThis new generation of Govee neon lighting features customizable lighting effects via the Govee Home app.The improved clamps can be bent in advance to the desired shape for a hassle-free installation.Easily manage the Neon Strip via the app, control box or voice control.This lighting is made of a softer material, with 14% more flexibility compared to the previous generation.RGBIC lighting effects.AI lighting bot: Powered by AIGC, this bot uses various advanced AI algorithms to analyze user input via text, voice and image data and generates compelling lighting effects through extensive data training.Easy setupAdjust your lighting effortlessly via the Govee Home app, Matter, Alexa or Google Assistant.
Add a colorful upgrade to your interior with the Govee Ceiling Light (Ø 30 cm). With a combination of RGBWW main light and RGBIC back light, you can enjoy vibrant and versatile lighting with fully adjustable brightness.
Features
RGBWW main light and RGBIC back light for dynamic lighting.
Adjustable brightness from 0% to 100% and color temperature from 2200K – 6500K.
Smart control via Alexa, the Govee Home App (individual or group), and Matter.
70+ scene and music modes with fully customizable light effects.
Circadian rhythm with automatic dimming and color adjustment for natural lighting throughout the day.
Meet the Govee Next-Gen COB (Chip on Board) LED strip lighting with 1260 LEDs per meter for smooth lighting and high brightness. This COB LED strip offers customizable segments, preset scenes, and smart control via the Govee Home app, Matter, Alexa, and Google Assistant.FeaturesNext-Gen COB Technology: With 1260 LEDs per meter closely packed thanks to COB technology, this strip delivers flawless lighting effects and higher lumen output.RGBIC+W for accent and multi-color lighting: Various preset scene modes with RGBIC+W colors for ambient lighting in the home.Stick, connect, and use: Equipped with a custom-made acrylic backing for extra strong adhesion. The COB LED strip is cuttable for easy length customization (not extendable).Convenient smart control: These COB LED strip lights are compatible with Matter, Alexa, and Google Assistant, and can be controlled via the Govee Home app.Personalized segment control: Easily create unique and personalized COB lighting effects with 12 segments per meter and a total of 16 million available colors.High bead durability: The beads have a lifespan of over 30,000 hours, ensuring long-term use.
Discover a stunning light show with the Govee RGBIC Curtain Lamps. With 520 LEDs you can create dynamic lighting effects and customize your own DIY light show. Add a special touch to any evening with these beautiful lamps. With DreamView and Music Mode, you can connect these curtain lights to multiple Govee smart lights for better immersive lighting.FeaturesFeatures b>Contains 520 drop-shaped light beads, which ensures a higher pixel density.More creativity with DIY mode.Your personal light show.Smart control.Extensive installation options: Includes hooks, tape and seamless nails for multiple installation options.Manage the Curtain Lights easily via the app, control box or voice control.IP65 (note: the adapter has an IP44 rating). Works with Alexa and Google Assistant.
The Govee Edison Bulb G80 E27 combines the iconic design of a classic globe filament bulb with modern smart lighting. Featuring a large G80 shape, visible filament and RGBWW lighting, this bulb is ideal for both ambient and decorative lighting in homes, hospitality and commercial environments.
With up to 500 lumens of brightness, the bulb provides both functional white light and millions of colors to create the perfect atmosphere. Using the Govee Home app, you can easily adjust colors, lighting scenes, timers and group control. The bulb also supports hands-free voice control.
With Matter support, the bulb integrates easily with multiple smart home platforms, including Apple Home, Google Home and SmartThings. This makes it a flexible solution for existing smart home installations without being tied to a single ecosystem.
Using WiFi and Bluetooth, the bulb connects directly without requiring an additional hub. This ensures easy installation for both new and existing setups. Group control allows multiple bulbs to be controlled simultaneously for a consistent lighting experience.
The Govee Edison Bulb G80 E27 is designed for users who want to combine the timeless appearance of a classic filament bulb with the convenience of modern smart lighting. The package includes two bulbs, making it ideal for fixtures that benefit from a symmetrical look.
Features
G80 globe design with visible RGBWW filament
E27 base for broad compatibility
Up to 500 lumens per bulb
Millions of colors and bright white light
Matter support for multi-platform integration
Works with Apple Home, Google Home and SmartThings
Control via the Govee Home app and voice assistants
WiFi and Bluetooth connectivity, no hub required
Group control and customizable lighting scenes
2-pack, ideal for decorative and ambient lighting
The Govee Edison Bulb G80 E27 combines the iconic design of a classic globe filament bulb with modern smart lighting. Featuring a large G80 shape, visible filament and RGBWW lighting, this bulb is ideal for both ambient and decorative lighting in homes, hospitality and commercial environments.
With up to 500 lumens of brightness, the bulb provides both functional white light and millions of colors to create the perfect atmosphere. Using the Govee Home app, you can easily adjust colors, lighting scenes, timers and group control. The bulb also supports hands-free voice control.
With Matter support, the bulb integrates easily with multiple smart home platforms, including Apple Home, Google Home and SmartThings. This makes it a flexible solution for existing smart home installations without being tied to a single ecosystem.
Using WiFi and Bluetooth, the bulb connects directly without requiring an additional hub. This ensures easy installation for both new and existing setups. Group control allows multiple bulbs to be controlled simultaneously for a consistent lighting experience.
The Govee Edison Bulb G80 E27 is designed for users who want to combine the timeless appearance of a classic filament bulb with the convenience of modern smart lighting. The package includes two bulbs, making it ideal for fixtures that benefit from a symmetrical look.
Features
G80 globe design with visible RGBWW filament
E27 base for broad compatibility
Up to 500 lumens per bulb
Millions of colors and bright white light
Matter support for multi-platform integration
Works with Apple Home, Google Home and SmartThings
Control via the Govee Home app and voice assistants
WiFi and Bluetooth connectivity, no hub required
Group control and customizable lighting scenes
2-pack, ideal for decorative and ambient lighting
Illuminate your home in a smart and colorful way with the Govee Smart Wifi & BLE Light Bulb 800lm. This advanced smart lamp offers you ultimate control over your lighting via both WiFi and Bluetooth, making it easy to create the perfect atmosphere for any occasion.FeaturesSmart ControlsCompatible with Amazon Alexa and Google AssistantBright and Efficient: With a light output of 800 lumens and a low energy consumption of only 9W, this lamp provides bright lighting without high energy costs. Ideal for living rooms, bedrooms, offices and more.Customizable Colors and ScenesEasy InstallationE27
Illuminate your home in a smart and colorful way with the Govee Smart Wifi & BLE Light Bulb 800lm. This advanced smart lamp offers you ultimate control over your lighting via both WiFi and Bluetooth, making it easy to create the perfect atmosphere for any occasion.FeaturesSmart ControlsCompatible with Amazon Alexa and Google AssistantBright and Efficient: With a light output of 800 lumens and a low energy consumption of only 9W, this lamp provides bright lighting without high energy costs. Ideal for living rooms, bedrooms, offices and more.Customizable Colors and ScenesEasy InstallationE27
With the Govee Floor Lamp 2 you give your space the ambiance it deserves. This Wi-Fi LED floor lamp is compatible with Matter for hands-free ease of use. Enjoy adjustable warm and cool white temperatures from 2200k-6500k, music modes, preset lighting scenes, DIY adjustments and smart group control via Govee DreamView.Features Progressive design.RGBICWW technology and clarity.Works with Alexa, Homekit and Google Assistant . Interactive music experienceExplore a range of lighting choices with 80+ preset scene modes and user-customizable DIY modes with the Govee Home App. Easily change the atmosphere of your space with effects such as Cherry Blossoms, Mother's Day and Fireworks.
The Govee Floor Lamp Lite is a slim and minimalist floor lamp that gives any living space a modern look. Thanks to RGBICW technology, you can create vibrant color combinations for the perfect atmosphere at home. With Matter support, the lamp integrates easily into various smart home systems.Features:Let your lighting sync to music with Music ModeHands-free control via voice commandsRGBICW technology for rich and dynamic color displayDIY mode with 14 individually adjustable color segmentsChoice of 58 pre-programmed scene modes
The Govee Galaxy Light Projector 2 Pro transforms any space into an impressive starry sky. With ultra-clear lenses and high brightness, it delivers a realistic projection with over 3,200 combinations of scenes and sounds. Ideal for themed settings, cozy movie nights or indoor camping experiences with the family.
Features
Projection area up to 28 m² with a 90° projection angle for wide and immersive starry sky coverage.
230 lux brightness – twice as bright as previous models, offering clear and detailed projections without blur.
Over 3,200 combinations with 8 interchangeable discs, 20+ scenes and 21+ white noise options for personalized experiences.
Fully adjustable 360° projection angle with quick and easy film disc swapping for fast scene transitions.
Supports Alexa, Google, Matter and Govee Home App – instantly switch between favorite scenes using voice or app control.
Want to create a more impressive gamer room? With mesmerizing lighting effects, a customizable layout and a sleek design (inspired by anime), the Govee Gaming wall light is exactly what you are looking for. The interchangeable front panels make this wall lighting even more versatile.The design of this wall lighting is based on your favorite Anime. With the EVA-01's purple-green armor color scheme, futuristic raised diffuse strips reminiscent of Tokyo-3, an angular hood in the shape of a protective A.T. field and a variety of hidden design elements you will make your Gaming room unique.
Features
Contents are 4 light elements and 1 square connectorBrings entertainment, films and games to life.
RGBIC lighting effects.
Easily manage the Wall Light via the app, control box or voice control.
40+ Beautiful scene and music modes.
Exclusive EVA light effectsWorks with Alexa and Google Assistant.
Customizable design layout.
Easy installation
Add a vibrant touch to any room with the Govee Neon Rope Light 2. Shape recognition technology makes adjustment easy, while improved clamps make it easier to bend and create the desired shape. Illuminate your space with this versatile and dynamic lighting option.FeaturesNot for outdoor useThis new generation of Govee neon lighting features customizable lighting effects via the Govee Home app.The improved clamps can be bent in advance to the desired shape for a hassle-free installation.Easily manage the Rope Light 2 via the app, control box or voice control. This lighting is made of a softer material, with 14 % more flexibility compared to the previous generation.RGBIC lighting effects.AI lighting bot: Powered by AIGC, this bot uses several advanced AI algorithms to analyze user input via text, voice and image data and generates captivating lighting effects through extensive data training.Easy setupAdjust your lighting effortlessly via the Govee Home app, Matter, Alexa or Google Assistant.
Give any room a vibrant touch with the 4-metre Govee Neon Strip. Shape recognition technology makes adjustment easy, while improved clamps simplify bending and creating the desired shape. Illuminate your space with this versatile and dynamic lighting option.FeaturesNot for outdoor useThis new generation of Govee neon lighting features customizable lighting effects via the Govee Home app.The improved clamps can be bent in advance to the desired shape for a hassle-free installation.Easily manage the Neon Strip via the app, control box or voice control.This lighting is made of a softer material, with 14% more flexibility compared to the previous generation.RGBIC lighting effects.AI lighting bot: Powered by AIGC, this bot uses various advanced AI algorithms to analyze user input via text, voice and image data and generates compelling lighting effects through extensive data training.Easy setupAdjust your lighting effortlessly via the Govee Home app, Matter, Alexa or Google Assistant.
Add warmth and ambiance to your garden or patio with the Govee Outdoor Clear Bulb String Lights. This smart string of lights with clear bulbs combines classic design with modern RGBICWW technology. Perfect for garden parties, cosy evenings, or festive decorations. Easily control them via the Govee Home app, voice assistants, or Matter.
Features:
RGBIC lighting with individually controllable LEDs
Clear, classic-style bulbs made from durable materials
Weather-resistant bulb design (IP67) for outdoor use
Control unit (IP65)
Power adapter (IP44)
80 lm per bulb
Control via Govee Home app, Google Assistant, Amazon Alexa, or via Matter
Built-in light scenes and music mode for extra ambiance
Safe and energy-efficient thanks to low-voltage power
Up to 20 metres in length with 20 bulbs per set
Matter compatible
Add color and atmosphere to your garden with the Govee Outdoor Garden Lights (2-pack). These smart outdoor lights combine a natural design with powerful 1100-lumen RGBWW lighting. Made from high-quality aluminum, they are designed for flexible placement — on a pole, mounted on a wall, or freestanding in the garden.
With advanced RGBWWIC technology and LuminBlend™ color mixing, you can create natural white tones and 16 million colors with high accuracy. Choose from 64 scene modes or create your own lighting effects via the Govee app. Thanks to the IP66 protection rating and temperature resistance down to -20°C, these lights are perfect for any season. Compatible with voice control and Matter integration.
Features:
RGBWWIC lighting with 1100 lumens and CRI 94 for true-to-life colors
Flexible placement: on pole, wall-mounted, or freestanding
Natural design made entirely of aluminum, inspired by organic shapes
IP66 waterproof (lights) and IP67 (control box)
Temperature resistant from -20°C to 45°C
64 scenes and music modes via the Govee app
Voice control and Matter-compatible (Alexa, Google Assistant)
The Govee Outdoor Flood Lights 2 offer enhanced brightness and multiple colors to make your outdoor activities a unique experience. These lights illuminate large areas with high reliability.
Features:
RGBWW Brightness Upgrade: The brightness of the white light is increased by 30%, with a color temperature of 2700K–6500K. Each lamp delivers more than 1000 lumens of light output.
Richer RGBIC Color Lighting: The brightness of the color light is increased by 80% to 100%. With 16 million colors, this ensures a rich and atmospheric lighting experience.
Improved Waterproofing: Thanks to the IP66 waterproof rating and enhanced structure, the lights operate reliably at temperatures from -20°C to 45°C and in adverse weather conditions.
Smart Control: Compatible with Matter, connectable via Bluetooth and Wi-Fi. Easy control via the app or voice commands with Alexa and Google Home.
Preset Scenes & DIY Mode: Choose from various preset scenes or design your own lighting effects to showcase your creativity and style.
Music Modes: Let the lights sync with the rhythm of the music to instantly create a festive atmosphere, bringing joy and energy.
Create an atmospheric garden with the Govee Outdoor Spotlights 2. These smart outdoor spotlights, with an IP67 rating, deliver powerful light in a wide range of colours and are perfect for illuminating facades, trees, or garden elements. Easily control them via the Govee Home app or with voice assistants like Google Assistant and Amazon Alexa.
Features:
Customizable RGBIC lighting with up to 16 million colours
Weather-resistant spotlight design (IP67) for outdoor use
Control unit (IP65)
Power adapter (IP44)
Control via Govee Home app, Google Assistant, Amazon Alexa or Matter on other platforms
Pre-set light scenes for every moment or season
Extendable up to 5 spotlights (2 extra spots sold separately)
Low voltage operation for added safety
Matter compatible
Bring new life into your home with the Govee Outdoor LED Strip. Measuring 10 meters in length and waterproof to the IP65 standard, this lighting is perfect for larger homes, sheds and more. Get creative for Halloween, Christmas or other special occasions with over 64 preset scenes and various customization options in the Govee Home app. Connect three 10 meter rolls into one long continuous line of 30 meters. Use the supplied clamps and sticker to attach the strip to a dry and clean surface. For safety reasons, the light strip may not be cut, extended or combined with different sets.LED on: this LED Strip cannot be are cutFeaturesUnique lighting effects by RGBICWW technology.Manage the outdoor strip easily via the app, control box or voice control. 64 scenes and endless colors.Synchronize the lighting with music.Easy installation.Wifi 2.4 GhzBluetoothIP65 Strip and controller IP44 AdapterWorks with Alexa and Google Assistant.
The Govee Pixel Light combines creativity and technology in one striking design. With advanced LED technology, the display delivers bright and uniform visuals, perfect for pixel art, animations, and personalized creations. Featuring AI-driven lighting, interactive functions, and a retro sound experience, it’s a unique addition to any gaming or workspace setup.
Features
Clear and consistent display quality with advanced LED technology for sharp pixel art rendering.
Dynamic animations up to 30fps, with the option to upload and display your own designs.
Industry’s first AI-powered Pixel Light with a self-learning model for precise and aesthetic lighting effects.
Interactive features including weather updates, countdowns, Bitcoin tracking, and NBA schedules, making it a smart daily assistant.
Game-inspired design with a sleek mechanical look that enhances any gaming or workspace environment.
Music mode with 10 built-in rhythm effects synchronizes lighting with your favorite songs.
Retro electronic speaker with built-in 8-bit music delivers lively sound effects and audio notifications.
Take your desk to the next level with the Govee RGBIC LED Neon Rope Lights. This lighting easily creates beautiful lighting effects for more advanced experiences during gaming, for example.Features Unique lighting effects through RGBIC technology.42 adjustable segments to adjust RGBIC lighting effects.Easily manage the RGBIC Neon Rope via the app, control box or voice control. 3 meters. 12 specific cutting points for a perfect fit.Synchronization with Gaming Sync Box and Razer Chroma.< li>Easy installationWorks with Alexa and Google Assistant.
Transform any outdoor space with the flexible outdoor neon Rope Light. With over 64 scene modes, IP67 waterproofing and seamless voice control, this lamp creates an inspiring atmosphere for your patio, backyard and more.Note: This RGBIC LED strip cannot be cut.FeaturesFestive RGBIC lightingWaterproof to the IP67 standard and an IP65 adapter.Use simple voice commands via Alexa, Google Assistant and the Govee Home app. Sync with music: A built-in microphone detects audio to sync lighting effects with the music in real time.
The Govee RGBICWW Light Bars are two compact light bars designed to create atmospheric lighting around a television, monitor or gaming setup. The combination of RGBIC colours and warm white light makes the Light Bars suitable for entertainment, gaming and decorative lighting in living and working spaces.
RGBICWW technology allows multiple colours to be displayed simultaneously across separate lighting segments. Additional warm white LEDs provide a natural white light colour. The Govee Home app can be used to adjust colours, brightness and dynamic lighting scenes.
The built-in microphone allows the lighting to react to music and ambient sound. Colours and lighting effects move with the rhythm of music, films and games to create a lively lighting experience.
Support for Matter allows the lighting to integrate with different smart home platforms, including Apple Home, Google Home, Amazon Alexa and Samsung SmartThings. The Light Bars connect directly via 2.4GHz Wi-Fi and Bluetooth without requiring an additional hub. Control is available through the Govee Home app, voice assistants and the included control box.
The Light Bars can be placed upright next to a television or monitor or attached to the back of a screen using the included brackets. The different mounting options allow the light to be directed towards a wall or into the room. The Light Bars are recommended for televisions and monitors smaller than 45 inches.
Features
Set of two smart RGBICWW Light Bars
Compact size of 27cm per Light Bar
RGBIC technology for displaying multiple colours simultaneously
Warm white LEDs for natural ambient lighting
Light output up to 300 lumens
Dynamic colours and adjustable lighting scenes
Music mode using the built-in microphone
Supports Matter
Works with Apple Home, Google Home, Amazon Alexa and Samsung SmartThings
Control via the Govee Home app, voice assistants and control box
Connects via 2.4GHz Wi-Fi and Bluetooth, no additional hub required
Can be placed upright or mounted behind a screen
Table stands and screen mounting brackets included
Recommended for televisions and monitors smaller than 45 inches
Power consumption of 18W
Operating temperature from -10 to 45°C
Discover the latest generation of LED wall panels, ideal for creating stunning light displays in any space. With endless DIY possibilities and smart control, you can easily transform the atmosphere in your home with this 10-pack.FeaturesUnlimited Design Options: Thanks to the flexible, square design, you can easily link the panels together via the connecting pieces on all four sides, opening up endless possibilities for unique, creative light installations.Smart Graphics Recognition: A built-in MCU chip allows the app to recognize and control the layout of the panels, ensuring your design always perfectly matches your style.RGBIC Color Brilliance: With a curved, transparent PC lampshade, these LED panels create a vibrant, three-dimensional appearance. The RGBIC technology brings each color to life, with a dedicated chip for bright and dynamic effects.Connectable and Expandable: A single power adapter can power up to 70 cube panels. Through the Govee Home App, you can personalize each panel for a unique pixel art experience.For Any Space and Occasion: With over 50 scene lighting effects and music sync modes, these LED panels are perfect for the bedroom, living room, children's room, or game room.Smart Voice Control: Compatible with Matter, Google Assistant, and Alexa, allowing you to effortlessly adjust the lighting atmosphere to suit your mood and activities.
With 16 million RGB colors and more than 60 scenes, enjoy dynamic lighting and the perfect ambiance, all in one stylish design that's ideal for decoration.FeaturesRGBIC & 16 Million Colors: With 16 million RGB colors and more than 60 scenes, this lamp offers dynamic lighting, controllable via 4 different methods.4 Control Options: Convenience via Touch Control, Remote Control, App Control, and Voice Control with the built-in smart speaker.Dimmable Lighting: Adjust brightness from 1%-100% and set the color temperature from 2700K (warm white) to 6500K (cool white) to meet your daily needs.Customizable DIY Mode: Create various stunning light patterns to craft the ideal color combinations.Voice and App Control: Compatible with Alexa, Google Assistant, and Matter. Easily control your night light with voice commands without getting out of bed.Timer Function: The built-in timer of this night light helps you fall asleep and wake up on time every day with a set schedule.
Govee Smart TV Backlight 3S (for 55-65 inch TVs) is a smart RGBICW LED strip for backlighting televisions from 55 to 65 inches. The 1080p camera is positioned at the top centre of the screen and uses ColorSense Technology to detect the displayed colours. The LED strip automatically reproduces these colours, extending films, series and games with matching ambient light.
RGBICW technology enables multiple colours and additional white light to be displayed simultaneously. Colour and brightness can be adjusted for each segment. Using the built-in microphone, Music Mode can synchronise the lighting effects with music and other sounds.
The lighting can be controlled using the control box, the Govee Home app or voice commands through Amazon Alexa and Google Assistant. It connects via Bluetooth and 2.4GHz Wi-Fi. Matter support also enables the lighting to be added to a compatible Matter platform.
The LED strip attaches to the rear of the television and has 1.96 ft sections for each side and 3.93 ft sections for the top and bottom. The set includes the LED strip, a power adapter, the control box, the camera and a user manual.
Features
Designed for televisions from 55 to 65 inches
1.96 ft sections for each side and 3.93 ft sections for the top and bottom
1080p camera with ColorSense Technology
RGBICW technology for multiple simultaneous colours and additional white light
Adjustable colour and brightness for each segment
Music Mode with built-in microphone
Control via the Govee Home app, control box and voice commands
Works with Amazon Alexa and Google Assistant
Matter-compatible for integration with compatible smart home platforms
Connects via 2.4GHz Wi-Fi and Bluetooth
Includes LED strip, power adapter, control box, camera and user manual
Please note: This version is intended for televisions from 55 to 65 inches. A 2.4GHz Wi-Fi network is required for the app connection; 5GHz Wi-Fi is not supported. Matter integration requires a compatible Matter controller. The camera must be mounted at the top centre of the television and calibrated using the Govee Home app.
Transform the visuals on your screen with Govee's advanced TV backlight, equipped with a single camera and Govee Envisual technology. Enjoy beautiful lighting effects while watching your favorite movies and TV shows.FeaturesProvides real-time color matching for an enhanced visual experience with Govee Envisual technology. single camera.30 LEDs per meter provide more vibrant and natural light.Choose from 4 modes to make your parties even more lively.Manage the Backlight easily via the app, control box or voice control.Works with Alexa and Google Assistant for easy voice control.2.4 GHz Wi-Fi & Bluetooth. Suitable for 55 - 65 inch TVs.
Become the chef in your own kitchen with the Govee Smart Wireless Meat Thermometer (2-Probe). Monitor and set functions via the Smart app and enjoy hassle-free wireless meat temperature measurement anytime, anywhere.
Features
Wi-Fi and Bluetooth for fast and stable connection.
LCD base or app for real-time temperature display.
Waterproof probe up to 300°C, accurate to ±1°C.
48-hour battery life, charges in 25 minutes (USB-C).
28 recommended temperatures in the app with smart cooking alerts.
Magnetic base, suitable for BBQ, grill, and smoker.
Note: supports 2.4GHz Wi-Fi only. Not suitable for direct contact with open flames.
Connect with other Govee products via DreamView for full synchronization throughout the house, bringing your movies and music to life. The RGBWW LED strip contains high-quality lamp beads for refined color blending. With the smart remote control or voice control, you can easily adjust the lighting effects, brightness, and more.Features5-in-1 RGBIC+ Technology: Independent IC chips allow multiple colors to be displayed simultaneously on one LED strip. Govee's upgraded 5-in-1 RGBWWIC lamp beads offer more natural colors with higher lumen brightness, achieving 2700-6500K true white light.DIY Features for Personalized Control: The customizable and cuttable LED strips have 10 segments per meter, with a total of 16 million adjustable colors for full personalization.A Range of Lighting Effects: More than 100 preset scenes for holidays, entertainment, and daily needs, so you can always create the perfect ambiance.Vivid Entertainment Features: Connect with other Govee products via DreamView for full synchronization throughout your home, making albums and concerts even more immersive.Smart Control: Easily adjust the lighting effects, brightness, and more with your voice for a seamless user experience.
Complete your interior with the Govee Table Lamp 2 Pro (Sound by JBL). This smart table lamp combines sharp lighting effects, JBL sound, and fast music sync for an immersive audiovisual experience. With 210 LEDs, voice control, and portable use up to 4.5 hours, it’s the perfect lamp for bedrooms, gaming setups, or modern living.
Features
Music sync in 32ms with 16 dynamic music modes.
210 LEDs for sharp visuals and endless color options.
Sound by JBL with stereo pairing for powerful sound.
Portable: up to 4.5 hours of light and sound via 5200mAh battery (at 50% volume and 50% brightness).
100+ scenes with adjustable brightness and color temperature.
Smart control via Alexa, Google Assistant, and Matter.
Music DreamView: sync up to 10 Govee lights.
Note: to reduce e-waste, no adapter is included. Charge via USB-C with a Power Delivery adapter (15V/35W or higher). Charge the product immediately upon receipt to avoid complete battery drain.
Smart RGBICWW table lamp with a built-in rechargeable battery. The Govee Table Lamp Classic S combines a timeless design with tunable white light, vivid colors and up to 500 lumens of brightness. The integrated 4800mAh rechargeable battery lets you place the lamp wherever you need it. Adjust the color temperature from 2700K to 6500K or choose from millions of colors and 72 dynamic scenes via the Govee Home app. Control is available via the app or voice commands. Supports Matter, Samsung SmartThings, Alexa and Google Assistant. Features:RGBICWW table lamp with tunable white light and millions of colors Built-in 4800mAh rechargeable battery for portable use Up to 500 lumens with adjustable color temperature from 2700K to 6500K 72 dynamic lighting scenes and music-reactive effects Control via app or voice (Matter, Samsung SmartThings, Alexa and Google Assistant) Classic design for living rooms, bedrooms or home offices
Smart RGBWW floor lamp with three individually adjustable lamp heads. The Govee Tree Floor Lamp combines powerful lighting (1500 lm) with flexible positioning and precise color settings.
Thanks to LuminBlend™ technology, colors are rendered smoothly and accurately. Use the app or voice control to easily set scenes, colors, and brightness. Supports Matter, Alexa, and Google Assistant.
Features:
RGBWW floor lamp with three individually adjustable light sources
Flexible positioning: lamp arms rotate 350° horizontally and 90° vertically
LuminBlend™ technology for smooth color transitions and high color accuracy
64+ preset scenes and music modes
Control via app, control box, or voice (Matter, Alexa, Google Assistant)
Suitable for both ambient and functional lighting in any interior
Upgrade your visuals with the Govee TV Backlight 3 Lite. This Back Light corrects the distortion with a wide-angle lens, expanding the effective color tuning range for more accurate edges. This set offers customization options for ultra-thin TVs and more!FeaturesProvides real-time color matching for an enhanced visual experience with Govee Envisual technology. camera.30 LEDs per meter provide more vibrant and natural light.Choose from 4 modes to make your parties even more lively.Manage the Backlight easily via the app, control box or voice control.Works with Alexa and Google Assistant for easy voice control.2.4 GHz Wi-Fi & Bluetooth. Suitable for 55-65 or 75-85 inch TVs.
Upgrade your visuals with the Govee TV Backlight 3 Lite. This Back Light corrects the distortion with a wide-angle lens, expanding the effective color tuning range for more accurate edges. This set offers customization options for ultra-thin TVs and more!FeaturesProvides real-time color matching for an enhanced visual experience with Govee Envisual technology. camera.30 LEDs per meter provide more vibrant and natural light.Choose from 4 modes to make your parties even more lively.Manage the Backlight easily via the app, control box or voice control.Works with Alexa and Google Assistant for easy voice control.2.4 GHz Wi-Fi & Bluetooth. Suitable for 55-65 or 75-85 inch TVs.
Upgrade your visuals with the Govee TV Backlight 3 Lite. This Back Light corrects the distortion with a wide-angle lens, expanding the effective color tuning range for more accurate edges. This set offers customization options for ultra-thin TVs and more!FeaturesProvides real-time color matching for an enhanced visual experience with Govee Envisual technology. camera.30 LEDs per meter provide more vibrant and natural light.Choose from 4 modes to make your parties even more lively.Manage the Backlight easily via the app, control box or voice control.Works with Alexa and Google Assistant for easy voice control.2.4 GHz Wi-Fi & Bluetooth. Suitable for 55-65 or 75-85 inch TVs.
Transform the images on your screen with Govee's advanced TV backlight, equipped with dual cameras and Govee Envisual technology. Enjoy beautiful lighting effects while watching your favorite movies and TV shows.FeaturesProvides real-time color tuning for an enhanced visual experience with Govee Envisual technology. Increases capture range by 50% and captures content 40% more accurately by innovative dual camera design.60 LEDs per meter provide more vibrant and natural light.Choose from 4 modes to make your parties even more lively. Easily manage the Backlight via the app, control box or voice control.Works with Alexa and Google Assistant for easy voice control.2.4 GHz Wi-Fi & Bluetooth. Suitable for 55 - 65 inch TVs.
The Govee TV Light Bars are two smart light bars designed to create atmospheric background lighting around a television. Measuring 38cm per light bar and providing a wide lighting effect, the Light Bars are suitable for televisions from 45 to 70 inches.
RGBWIC technology allows multiple colours to be displayed simultaneously across separate lighting segments. Integrated white LEDs also provide warm white light. The Govee Home app can be used to adjust colours, brightness and a range of dynamic lighting scenes.
The built-in microphone allows the lighting to react to music and ambient sound. Eight dynamic music modes make the colours and lighting effects move with the rhythm. This makes the Light Bars suitable for atmospheric lighting while watching films, gaming, listening to music or celebrating special occasions.
The Light Bars connect directly via 2.4GHz Wi-Fi and Bluetooth without requiring an additional hub. The lighting can be controlled through the Govee Home app, the included control box and voice commands using Amazon Alexa and Google Assistant.
The Govee TV Light Bars can be positioned next to the television or attached to the back using the included screen mounting brackets. The different mounting options allow the light to be directed towards the wall or into the room to create the desired lighting experience.
Features
Set of two smart TV Light Bars
Designed for televisions from 45 to 70 inches
Length of 38cm per Light Bar
RGBWIC technology for displaying multiple colours simultaneously
Warm white light through integrated white LEDs
30 lighting points for a wider lighting effect
Light output up to 170 lumens
Dynamic colours and adjustable lighting scenes
Eight music modes using the built-in microphone
Control via the Govee Home app and control box
Voice control through Amazon Alexa and Google Assistant
Connects via 2.4GHz Wi-Fi and Bluetooth, no hub required
Can be placed upright or mounted behind the television
Table stands and screen mounting brackets included
Power consumption of 24W
Operating temperature from 0 to 40°C