Nice CO Alarm-Control
Carbon monoxide detector with Z-Wave
Product number:
301616430301
Product information "Nice CO Alarm-Control "
The Nice CO Alarm-Control is a compact carbon monoxide detector. Thanks to its stylish design, the CO Sensor can be mounted on the wall at the ideal height. Due to its high sensitivity, the sensor detects carbon monoxide (CO) gas at a minimum quantity. An alarm is signaled by the built-in siren, flashing LED and by sending Z-Wave commands.
Features
Can be used as a stand-alone carbon monoxide detector without intelligent functions
Mounting to the wall
Battery powered
Completely wireless
Acoustic signal and LED indicator
Built-in temperature sensor.
| Acoustic signal: | 85 dBA at 3 meters |
|---|---|
| Alarm Response time with standard settings: | 50ppm 60-90min 100ppm 10-40min 300ppm |
| Battery included: | Yes |
| Battery life: | 3 years with standard settings (tested with Panasonic Industrial Lithium) |
| Battery type: | CR123A |
| Communicatie & Protocol: | Z-Wave |
| Dimensions Product: | 65 x 28 mm |
| In accordance with guidelines: | RED 2014/53/EU RoHS 2011/65/EU EN 50291-1:2010 |
| Lifetime under typical circumstances: | 8 years |
| Measurable carbon monoxide range: | 0 – 450 ppm |
| Measurement accuracy: | ± 10ppm / ± 5% |
| Operating humidity: | 10-95% relative humidity without condensation |
| Operating temperature: | 0-50 °C |
| Power source: | 3V battery |
| Protocol: | Z-Wave, Z-Wave (500 series chip) |
| Radio frequency: | 868.0–868.6MHz 869.7–870.0MHz |
| Range: | outdoor up to 50m indoors up to 40m (Depending on terrain and building construction) |
| Sensors: | Carbon monoxide (CO) |
| Transmit power: | -5 dbm |
Downloads "Nice CO Alarm-Control "