The Popp Z-Weather is a weather station with Z-Wave for measuring wind speed, humidity, light intensity, atmospheric pressure, outside temperature and dew point. The weather station is powered by a solar cell and operates on an internal capacitor. Important when using the Z-Weather for the first time Because the Z-Weather works on a solar cell and internal capacitor, the device must be fully charged. In direct sunlight it takes 4 – 6 hours and without direct sunlight it can take up to 12 hours to charge. Built-in energy manager Thanks to the intelligent energy management and the internal capacitor, the built-in energy manager automatically calculates the Wake Up interval. This is done between 5 minutes (on sunny days) and 1-2 hours on cloudy days, or at the beginning of the day. In addition, the energy manager protects the weather station against a complete discharge. It allows continuous operation for reporting gusts, storms or twilight in case of an emergency. In addition, the solar cell measures and calculates the energy supplied. The measurement is normalized to a 1 square meter solar panel and reported with 16% efficiency in kWh. To calculate the wind gain, every 8e rotation is counted and the total sum is reported as Impulse. Practical application of the Z-Weather By measuring the wind speed, your motorized outdoor sun protection can close automatically, for example drop-arm awnings, folding arm awnings, awnings, screens and shutters. By measuring the light intensity you can switch the outdoor lighting automatically. With the outside temperature you can automatically open the motorized outdoor blinds. Thanks to Z-Weather you can trigger the closing of the awning and blinds by directly linked devices or scenes. Measurements of ambient light and solar gain can be used to turn the outdoor lighting on at dusk and off in the morning. The Z-Weather registers the following values: Value Range Accuracy Wind speed 0 – 31 m/s ±1m/s Humidity 1 – 100% ±3% Light intensity 0 – 100% ±7% Atmospheric pressure 600 – 1200 mBar ± 1mBar Outside temperature -10 - +60ºC ±0.7ºC Features Z-Wave Plus Unique Z-Wave weather station Multisensor for measuring values ​​in an outdoor environment Measure, among other things, wind speed in m/s, light intensity in lux and outside temperature. Works on solar energy in combination with an internal capacitor

The NICE Domi Climatic (WSR) is a stylish and wireless climate sensor for measuring the outdoor light intensity (LUX) and wind speed (m/s) and whether there is rain (on/off)This climate sensor is supplied with 230V. The sensor is splash-proof (IP55) and made of weather-resistant materials, so it can be hung outside on the facade of a building. The sensor part is adjustable relative to the mounting base, allowing mounting on sloping or overhanging surfaces. The Nice Domi Climatic uses the Nice BiDi protocol (on 433Mhz) and can therefore be linked to the Nice-FIBARO gateways with the Nice BiDi protocol. Measured values: Light intensity 0 - 83000 LUX Wind speed 10 – 120 km/hRain on/offPractical applications:By connecting this Nice Dome Climatic sensor to a Nice -FIBARO gateway creates several new and interesting usage options, such as: Outdoor light measurement, this can be used to determine whether it is dim/dark, followed by starting specific atmospheric scenes. Wind speed measurement, for closing skylights, retrieving drop-down awnings or sending interactive push messages to users.Rain,< /b> for closing skylights, retrieving drop-down awnings or sending interactive push messages to users.NOTE: The transmission range of the Nice BiDi protocol is more limited than Z-Wave. Place this climate sensor as close as possible to the Nice-FIBARO gateway and test the range before final installation.   Features • Stylish outdoor sensor • Wind speed and light intensity measurement • 230 Volt• Nice BiDi communication protocol • Can also be directly connected to Nice sun protection motors

The NICE Domi Climatic (WS) is a stylish and wireless climate sensor for measuring outdoor light intensity (Lux) and wind speed (km/h). This climate sensor is powered by 230V. The sensor is splash-proof (IP55) and made of weather-resistant materials, making it suitable for mounting on an exterior wall. The sensing part is adjustable relative to the mounting base, allowing installation on sloped or overhanging surfaces. The Nice Domi Climatic uses the Nice BiDi protocol (at 433MHz) and can be connected to Nice-FIBARO gateways with the Nice BiDi protocol. Measured values: Light intensity: 0 - 83,000 Lux Wind speed: 10 – 120 km/h Practical applications: By connecting this Nice Domi Climatic sensor to a Nice-FIBARO gateway, various new and interesting use cases become available, such as: Outdoor light measurement: allows detection of dusk or darkness, triggering specific scenes. For example, closing blinds, awnings or starting lighting scenes. Wind speed measurement: for closing skylights, retracting awnings or sending interactive push notifications to users. Note: The transmission range of the Nice BiDi protocol is limited. Install this climate sensor as close as possible to the Nice-FIBARO gateway and test the range before final installation.   Features • Stylish outdoor sensor • Wind speed and light intensity measurement • 230V powered • Nice BiDi communication protocol • Can also be directly connected to Nice sunshade motors

The NICE Domi Climatic (WSC) is a stylish and wireless climate sensor for measuring light intensity (LUX), wind speed (m/s) and temperature (ºC). This climate sensor has its own solar cell that provides the required energy. This makes the installation location more flexible because no power wires need to be installed. The sensor is splash-proof (IP55) and made of weather-resistant materials, so it can be hung outside on the facade of a building. The sensor part is adjustable relative to the mounting base, allowing mounting on sloping or overhanging surfaces. The Nice Domi Climatic uses the Nice BiDi protocol (on 433Mhz) and can therefore be linked to the Nice-FIBARO gateways with the Nice BiDi protocol. Measured values: Light intensity 0 - 83000 LUX Wind speed 10 – 120 km/h Temperature -20 to 60 ºC Practical applications: By connecting this Nice Dome Climatic sensor to a Nice-FIBARO gateway, several new and interesting usage options are created, such as: Outdoor light measurement, this can be used to determine whether it is dim/dark, followed by starting specific atmospheric scenes. Wind speed measurement, for closing skylights, retrieving drop-down awnings or sending interactive push messages to users. Outside temperature measurement, in combination with the measured lux value, can be used to determine whether the awning can be lowered, if the wind is not too strong, of course, so that the inside temperature does not rises too high. NOTE: The transmission range of the Nice BiDi protocol is more limited than Z-Wave. Place this climate sensor as close as possible to the Nice-FIBARO gateway and test the range before final installation. Features • Stylish outdoor sensor • Wind speed, light intensity and temperature measurement • Autonomous energy supply by solar cell • Nice BiDi communication protocol • Can also be directly connected to Nice sun protection motors