Nice DoubleSmart-Control

Communicatie & Protocol:	Z-Wave
Installation method:	Flush mount
Operating humidity:	10-90% relative humidity without condensation
Operating temperature:	0-35°C
Power source:	100-240V AC, 50/60Hz
Protocol:	Z-Wave
Radio frequency:	868.0–868.6MHz 869.7–870.0MHz

Controller	Controller FW	Device FW	Compatibility Status	Note
FIBARO Home Center 3	5.110		Compatible
FIBARO Home Center 3 Lite	5.110		Compatible

Nice Plug-Control E

The Nice Plug-Control E is an intelligent compact plug & play plug. Designed for remotely switching on and off connected devices (up to 2.5 kW) and measuring active power consumption. Thanks to the LED ring, the current energy consumption is easy to read. The LED ring can also be used to test the Z-Wave range. The Wall Plug is available in the following variants type F (NL), type E (BE/FR).FeaturesEnergy consumption visible via the LED ring and the Z-Wave controller Control any connected device wirelessly via Z-Wave Built-in Z-Wave range tester Overload protectionLED ring can be used as a night and orientation lamp

Product number: 301616330301

€65.00*

FIBARO Home Center 3 Lite & Nice HubPowerbank Bundle

About the FIBARO Home Center 3 LiteThe FIBARO Home Center 3 Lite is the smaller basic version of the most advanced smart home system (Home Center 3). The device is designed on the software used in the Home Center 3. With the HC3L you can manage and automate other Z-Wave devices for the control of lighting, heating, blinds, shutters, climate and alarm solutions. The Home Center 3 Lite is recommended for small installations in apartments and houses (up to 100m2). About the Nice HubPowerbank The Nice HubPowerbank is a mobile WiFi access point with a built-in LTE / 3G modem and USB power bank. The HubPowerbank is a complementary device for the FIBARO Home Center 3 Lite. The HubPowerbank makes it possible to connect the HC3L to a backup power supply. In addition, the installation of a SIM card provides an extra/emergency internet connection. By default, the Home Center 3 Lite will use the main power source and main WiFi. In the event of a power failure, the HubPowerbank automatically switches on to the emergency source and the device can provide power and internet for up to 12 hours. The combination of the Home Center 3 Lite and the HubPowerbank ensures that you always have access to the installation in the event of a power failure, internet failure or if there is no internet available yet. Think of new homes, environments with a security solution, wireless thermostatic valves and smoke detectors.

Product number: HC3L with HubPowerbank

€179.00*

Nice Dimmer-Control

The Nice Dimmer-Control has been developed for controlling different types of light sources. The Dimmer-Control supports two types of lighting dimming techniques, including trailing edge and leading edge. Thanks to the intelligent calibration, this is automatically detected. The Dimmer-Control can be used in 2- and 3-wire installations. The module measures the active power consumption of the connected lighting as standard. This product is intended for connection to FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The device can be operated and automated via the Z-Wave network. Features Soft-start function Built-in active power and energy measurement function Intelligent light source detection via automatic calibration Works with various types of switches, including pulse, toggle and toggle switch

Product number: 301618130301

€67.39*

Nice Roll-Control

The Nice Roll-Control has been developed for the control and precise positioning of AC-controlled motors, including roller shutters, blinds, awnings, screens and gates. The module supports motors with mechanical and electronic final adjustment. This product is intended for connection to FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The device can be operated and automated via the Z-Wave network. Features To be used with AC motors with electronic or mechanical final adjustment Measure the active energy consumption Works with various types of switches, including pulse switches and toggle switches Support motors with opening, closing and tilting

Product number: 301618230301

€70.00*

Nice BiDi-ZWave

BiDi-ZWave is a plug & play module designed for the integration of Nice Control Units through the IBT4 connector. It allows for easy integration with the FIBARO System. Thanks to the integration it is possible to control the position, check status and read diagnostic information.FeaturesCompatible with FIBARO Home CentersIntelligent algorithm automatically recognizes protocol and motor typeWorks with several Nice Control Units from last 10 years Uses the latest generation Z-Wave chip (700)

Product number: IBT4ZWAVE

€82.00*

Nice Camera Mount PFA130-E

Mounting box voor MyEye series IP camera's, 124mm, IP66

Product number: 409500120109

€15.65*

Nice Camera Mount PFA134

Mounting box voor MyEye Bullet Lite cameras, 90 mm

Product number: 409500110109

€10.22*

Nice Camera Mount PFA135

Mounting box for MyEye Bullet camera's, 94mm

Product number: 409500280109

€8.20*

Nice Camera Mount PFA137

Mounting box for MyEye Dome camera's, 122mm

Product number: 409500290109

€11.09*

Nice Camera Mount PFA13A-E

Mounting box voor MyEye Dome Lite cameras, 96.7 mm

Product number: 409500300109

€8.70*

Nice Camera Mount PFA151

Angled adapter voor MyEye camera's

Product number: 409500170109

€30.87*

Nice Camera Mount PFB203W

Wall bracket voor MyEye Dome camera's

Product number: 409500140109

€14.78*

Nice Camera Mount PFB205W-E

Wall bracket voor MyEye Dome Lite camera's

Product number: 409500090109

€15.43*

New

Nice Clima-Control

The Nice Clima-Control is the ideal solution for efficient and intuitive control of your air conditioning and heating system. This versatile device combines advanced technology with a user-friendly interface, allowing you to effortlessly adjust the temperature in your home to your preferences. With the built-in infrared transmitter, you can easily control existing air conditioning units. Using the available app, you can teach the Clima-Control the correct infrared codes. The Nice Clima-Control connects to your smart home via Z-Wave 800 and can both heat and cool. For heating, it can control a Z-Wave relay via association. With the built-in battery and included bracket, the Nice Clima-Control can be placed anywhere. Features Compatible with Nice Yubii smart home Infrared control of air conditioning devices Heat / Cool mode Z-Wave 800 Rechargeable battery USB-C 5V 2A

Product number: 409500480029

€115.22*

Nice CO Alarm-Control

The Nice CO Alarm-Control is a compact carbon monoxide detector. Thanks to its stylish design, the CO Sensor can be mounted on the wall at the ideal height. Due to its high sensitivity, the sensor detects carbon monoxide (CO) gas at a minimum quantity. An alarm is signaled by the built-in siren, flashing LED and by sending Z-Wave commands. FeaturesCan be used as a stand-alone carbon monoxide detector without intelligent functionsMounting to the wallBattery poweredCompletely wirelessAcoustic signal and LED indicatorBuilt-in temperature sensor.

Product number: 301616430301

€116.00*

Nice Domi WSC Climatic Wind-Sun Sensor Solar Powered

The NICE Domi Climatic (WSC) is a stylish and wireless climate sensor for measuring light intensity (LUX), wind speed (m/s) and temperature (ºC). This climate sensor has its own solar cell that provides the required energy. This makes the installation location more flexible because no power wires need to be installed. The sensor is splash-proof (IP55) and made of weather-resistant materials, so it can be hung outside on the facade of a building. The sensor part is adjustable relative to the mounting base, allowing mounting on sloping or overhanging surfaces. The Nice Domi Climatic uses the Nice BiDi protocol (on 433Mhz) and can therefore be linked to the Nice-FIBARO gateways with the Nice BiDi protocol. Measured values: Light intensity 0 - 83000 LUX Wind speed 10 – 120 km/h Temperature -20 to 60 ºC Practical applications: By connecting this Nice Dome Climatic sensor to a Nice-FIBARO gateway, several new and interesting usage options are created, such as: Outdoor light measurement, this can be used to determine whether it is dim/dark, followed by starting specific atmospheric scenes. Wind speed measurement, for closing skylights, retrieving drop-down awnings or sending interactive push messages to users. Outside temperature measurement, in combination with the measured lux value, can be used to determine whether the awning can be lowered, if the wind is not too strong, of course, so that the inside temperature does not rises too high. NOTE: The transmission range of the Nice BiDi protocol is more limited than Z-Wave. Place this climate sensor as close as possible to the Nice-FIBARO gateway and test the range before final installation. Features • Stylish outdoor sensor • Wind speed, light intensity and temperature measurement • Autonomous energy supply by solar cell • Nice BiDi communication protocol • Can also be directly connected to Nice sun protection motors

Product number: 301207210101

€132.00*

Nice Domi WSR Climatic Wind-Sun-Rain Sensor 230V

The NICE Domi Climatic (WSR) is a stylish and wireless climate sensor for measuring the outdoor light intensity (LUX) and wind speed (m/s) and whether there is rain (on/off)This climate sensor is supplied with 230V. The sensor is splash-proof (IP55) and made of weather-resistant materials, so it can be hung outside on the facade of a building. The sensor part is adjustable relative to the mounting base, allowing mounting on sloping or overhanging surfaces. The Nice Domi Climatic uses the Nice BiDi protocol (on 433Mhz) and can therefore be linked to the Nice-FIBARO gateways with the Nice BiDi protocol. Measured values: Light intensity 0 - 83000 LUX Wind speed 10 – 120 km/hRain on/offPractical applications:By connecting this Nice Dome Climatic sensor to a Nice -FIBARO gateway creates several new and interesting usage options, such as: Outdoor light measurement, this can be used to determine whether it is dim/dark, followed by starting specific atmospheric scenes. Wind speed measurement, for closing skylights, retrieving drop-down awnings or sending interactive push messages to users.Rain,< /b> for closing skylights, retrieving drop-down awnings or sending interactive push messages to users.NOTE: The transmission range of the Nice BiDi protocol is more limited than Z-Wave. Place this climate sensor as close as possible to the Nice-FIBARO gateway and test the range before final installation. Features • Stylish outdoor sensor • Wind speed and light intensity measurement • 230 Volt• Nice BiDi communication protocol • Can also be directly connected to Nice sun protection motors

Product number: 301212610101

€174.00*

Nice Door/Window-Control Black

Color: Black

The Nice D/W-Control is a wireless battery-powered magnetic contact sensor. The trigger is detected by separating the sensor and the magnet. The sensor is equipped with a built-in temperature sensor and tamper protection. This product is intended for control and automation with FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The sensor triggers can be used for automation via the Z-Wave network. Features Works on a battery Built-in temperature sensor Sensor for mounting on doors and windows Detection for tampering when removing or opening Visual LED indicator for device status

Product number: 301617930301

€59.00*

Nice Door/Window-Control Brown

Color: Brown

The Nice D/W-Control is a wireless battery-powered magnetic contact sensor. The trigger is detected by separating the sensor and the magnet. The sensor is equipped with a built-in temperature sensor and tamper protection. This product is intended for control and automation with FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The sensor triggers can be used for automation via the Z-Wave network. Features Works on a battery Built-in temperature sensor Sensor for mounting on doors and windows Detection for tampering when removing or opening Visual LED indicator for device status

Product number: 301617830301

€59.00*

Nice Door/Window-Control White

Color: White

The Nice D/W-Control is a wireless battery-powered magnetic contact sensor. The trigger is detected by separating the sensor and the magnet. The sensor is equipped with a built-in temperature sensor and tamper protection. This product is intended for control and automation with FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The sensor triggers can be used for automation via the Z-Wave network. Features Works on a battery Built-in temperature sensor Sensor for mounting on doors and windows Detection for tampering when removing or opening Visual LED indicator for device status

Product number: 301617430301

€59.00*

New

Nice DoubleSmart-Control

The Nice Smart-Control extends the functionality of classic devices and wired sensors. These devices can be integrated into the Z-Wave network with the Smart-Control. This product is intended for connection to FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The device can be operated and automated via the Z-Wave network. Features Integrated temperature sensor Connect with up to six DS18B20 (temperature) sensors, one DHT (humidity and temperature) sensor, two-wire analog sensors, three-wire analog sensors and two binary sensors.

Product number: 301619840301

€67.39*

New

Nice Fan2-Control

The Nice Heat-Control is a smart radiator thermostat knob with a built-in temperature sensor. The heat level is automatically controlled by the set schedules. Thanks to an innovative room analysis algorithm, the Heat-Control calculates the time it takes to reach the desired temperature based on room volume. Heat-Control can be adjusted manually at any time via the app and voice command. The Heat-Control has a built-in temperature sensor and can be connected to the separately available external temperature sensor. This product is intended for connection to FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The device can be operated and automated via the Z-Wave network. Features Suitable for thermostatic valves: M30 x 1.5, Danfoss RTD-N and Danfoss RA-N Easy to install without tools Built-in battery and rechargeable via standard micro-USB port* Visual LED ring for temperature display Frost protection and descaling function *No external USB power supply and cable included *No external temperature sensor included

Product number: 409500490029

€143.48*

New

Nice Fan4-Control

The Nice Fan4-Control offers smart and precise control of your air-based heating system with 2 valves for heating and cooling, ensuring optimal comfort in your home. This innovative device combines ease of use with advanced technology for efficient heating regulation. With convenient features such as control via Yubii Home and programmable schedules, you have full control over your heating and cooling, no matter where you are. The Fan4-Control integrates seamlessly into any smart home and provides flexibility for your specific needs. Connection to your smart home is via Z-Wave. Features Smart control: Easily set the desired temperature via the screen. Energy efficient: Save energy with smart heating schedules and automatic optimization. Compatible with Yubii Home Z-Wave Heat / Cool mode Fan speed (4 levels, 3 speeds) Compatible with smart home: Support for various platforms.

Product number: 409500500029

€152.17*

Nice Flood-Control

The Nice Flood-Control is a multifunctional sensor and more than just a wireless water detector. The device detects the smallest floods and has a built-in temperature sensor. Water detection is signaled by the integrated LED and the acoustic alarm. This product is intended for control and automation with FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The sensor triggers can be used for automation via the Z-Wave network. Features Detects flooding and leakage Built-in LED and audible alarm Compact and modern design Works on a battery, or on a DC power supply Floor or wall mounting with extended (wired) sensor probe

Product number: 301617231201

€70.00*