Technivolt 1100 is a charging station with a type 2 charging cable that is permanently integrated into the charging station. It meets the European standard and can charge most electric cars in Europe. With a charging capacity of 11 kW, the Technivolt 1100 can charge electric vehicles quickly and effectively. The charging station can be secured with RFID cards to prevent unauthorized charging. It also features an LED status display, which shows the charging status at a glance. Plug & Batch ISO 15118 The charging station uses Plug & Charge according to ISO 15118, which ensures secure authentication of the vehicle without additional charging authorization, such as an RFID card. As soon as the compatible electric car is connected via the charging cable, the charging process starts automatically. Access security with RFID If the charging station for electric vehicles is freely accessible in the driveway or in the carport, access protection that prevents unauthorized persons from charging makes sense. You can use up to 1000 RFID cards on the Technivolt 1100. Two RFID cards are included as standard. Additional RFID cards are available separately. LED status display The colored illuminated ring indicates that the battery is ready to charge or that the charging process is in progress. This way you will be kept informed of the status of the charging station. Protected against wind and weather In addition to rainwater, a charging station can also be exposed to dust and unauthorized use. That is why the Technivolt 1100 has a protection class of IP54. This means that it is well protected against dust, unwanted contact and splash water. Applicable to 1-phase and 3-phase connections The Technivolt 1100 & 1100 Smart charging stations are suitable for charging the car with a minimum of 1.4kW and a maximum of 11kW. With this you can charge any electric car! The Technivolt 1100 11 kW supports both 1-phase and 3-phase electricity connections. Different connectivity optionsThe charging points can be connected to WiFi, LAN and GSM (3G+4G – Micro-Sim). The web interface is currently only accessible locally. For private charging at home The Technivolt 1100 makes it possible for you to charge quickly and safely at home. Charging via the regular socket not only entails considerably longer charging times, but also a high security risk. You can install the Technivolt 1100 in different ways, such as under the carport, in the driveway or on a post. Charge management with multiple charging points If a parking space is equipped with several charging points, the house/mains connection is the limiting factor of the charging current at the charging point. TechniVolt's charging management offers the possibility to optimally adjust the charging current of multiple charging points to the available maximum current and distribute it to the connected electric cars. The load distribution can be static, dynamic and time dependent.Energy management & PV system integration The Technivolt 1100 can be integrated into a power management system, such as a compatible PV system, via LAN using the EEBUS protocol. This makes it possible to charge the electric vehicle with excess solar energy. An interface for the SMA Sunny Home Manager is already integrated and can be activated via the web interface. Lower installation costs thanks to integrated DC fault current detection Now it gets very technical, but definitely important! The Technivolt 1100 already has integrated electronic detection of smooth DC fault currents in the range of IΔn ≥ 6 mA, as prescribed by DIN EN 61851-1 for electric vehicles. It ensures that the vehicle's power supply is disconnected in the event of a DC fault current greater than 6 mA. For the electrician who connects the charging station, this means that he only needs a type A earth leakage circuit breaker. Installation by professionals A skilled electrician is required for installation and maintenance! Features Fast charging with from 1.4kW - 11kW Type 2 charging cable LED status indicator Suitable for private charging Plug & Batch in accordance with ISO 15118 Applicable to 1-phase and 3-phase connections Start charging station with and without extra authorization To be secured with an RFID card (max. 1000 cards) Integrated DC fault current detection Advanced power management and power management features

The Technivolt Stand 1 is suitable for the Technivolt 100 and 101 charging points. The pole is designed for the installation of one or two charging points. The mounting material and two adapter plates (single and double installation) for this are included as standard. Using this stand, the charge point can be placed freestanding, which has various advantages. Not only does it provide a visually appealing arrangement, it also offers maximum flexibility in terms of location and requires no drilling into the home or building.

Technivolt 1100 SMART is a charging station with a type 2 charging cable that is permanently integrated into the charging station. It meets the European standard and can charge most electric cars in Europe. With a charging capacity of 11 kW, the Technivolt 1100 SMART can charge electric vehicles quickly and effectively. The charging station can be secured with RFID cards to prevent unauthorized charging. It also features an LED status display, which shows the charging status at a glance. The Technivolt 1100 SMART offers similar functions to the Technivolt 1100. In addition, the SMART variant is suitable for private and semi-public charging. In addition, the 1100 Smart has an additional display and an integrated MID meter. Plug & Batch ISO 15118 The charging station uses Plug & Charge according to ISO 15118, which ensures secure authentication of the vehicle without additional charging authorization, such as an RFID card. As soon as the compatible electric car is connected via the charging cable, the charging process starts automatically. Access security with RFID If the charging station for electric vehicles is freely accessible in the driveway or in the carport, access protection that prevents unauthorized persons from charging makes sense. You can use up to 1000 RFID cards on the Technivolt 1100 Smart. Two RFID cards are included as standard. Additional RFID cards are available separately. LED status display The colored illuminated ring indicates that the battery is ready to charge or that the charging process is in progress. This way you will be kept informed of the status of the charging station.Protected against wind and weather In addition to rainwater, a charging station can also be exposed to dust and unauthorized use. That is why the Technivolt 1100 has a protection class of IP54. This means that it is well protected against dust, unwanted contact and splash water. Applicable to 1-phase and 3-phase connections The Technivolt 1100 & 1100 Smart charging stations are suitable for charging the car with a minimum of 1.4kW and a maximum of 11kW. With this you can charge any electric car! The Technivolt 1100 11 kW supports both 1-phase and 3-phase electricity connections. Different connectivity options The charging points can be connected to WiFi, LAN and GSM (3G+4G – Micro-Sim). The web interface is currently only accessible locally. For private and semi-public charging The Technivolt 1100 SMART makes it possible for you to charge quickly and safely at home. Charging via the regular socket not only entails considerably longer charging times, but also a high security risk. You can install the Technivolt 1100 SMART in various ways, such as under the carport, in the underground car park, in the driveway or on a post. In addition, the Technivolt 1100 SMART can also be used ideally as a charging station in semi-public spaces thanks to its functions. The charging station is suitable if you want to create a controlled charging infrastructure, such as charging points on company premises, in parking garages or in the parking lot of the supermarket. Charge management with multiple charging points If a parking space is equipped with several charging points, the house/mains connection is the limiting factor of the charging current at the charging point. TechniVolt's charging management offers the possibility to optimally adjust the charging current of multiple charging points to the available maximum current and distribute it to the connected electric cars. The load distribution can be static, dynamic and time dependent.Energy management & PV system integration The Technivolt 1100 SMART can be integrated into a power management system, such as a compatible PV system, via LAN using the EEBUS protocol. This makes it possible to charge the electric vehicle with excess solar energy. An interface for the SMA Sunny Home Manager is already integrated and can be activated via the web interface. Integrated MID meter The charging station has an integrated MID-certified energy meter, with which the power consumption can be measured and billed. Ideal for billing company cars or settling costs with tenants. Lower installation costs thanks to integrated DC fault current detection Now it gets very technical, but definitely important! The Technivolt 1100 SMART already has integrated electronic detection of smooth DC fault currents in the range of IΔn ≥ 6 mA, as prescribed by DIN EN 61851-1 for electric vehicles. It ensures that the vehicle's power supply is disconnected in the event of a DC fault current greater than 6 mA. For the electrician who connects the charging station, this means that he only needs a type A earth leakage circuit breaker. Installation by professionals An expert electrician is required for installation, repair or maintenance! The professional also has the responsibility to report to the local network operator/energy supplier. Features Fast charging with from 1.4kW - 11kW Type 2 charging cable LED status indicator Suitable for private and semi-public charging Applicable to 1-phase and 3-phase connections Plug & Batch in accordance with ISO 15118 Start charging station with and without extra authorization To be secured with an RFID card (max. 1000 cards) Integrated DC fault current detection Advanced features energy management, power management and integrated meter

Technivolt 1100 SMART is a charging station with a type 2 charging cable that is permanently integrated into the charging station. It meets the European standard and can charge most electric cars in Europe. With a charging capacity of 11 kW, the Technivolt 1100 SMART can charge electric vehicles quickly and effectively. The charging station can be secured with RFID cards to prevent unauthorized charging. It also features an LED status display, which shows the charging status at a glance. The Technivolt 1100 SMART offers similar functions to the Technivolt 1100. In addition, the SMART variant is suitable for private and semi-public charging. In addition, the 1100 Smart has an additional display and an integrated MID meter. Plug & Batch ISO 15118 The charging station uses Plug & Charge according to ISO 15118, which ensures secure authentication of the vehicle without additional charging authorization, such as an RFID card. As soon as the compatible electric car is connected via the charging cable, the charging process starts automatically. Access security with RFID If the charging station for electric vehicles is freely accessible in the driveway or in the carport, access protection that prevents unauthorized persons from charging makes sense. You can use up to 1000 RFID cards on the Technivolt 1100 Smart. Two RFID cards are included as standard. Additional RFID cards are available separately. LED status display The colored illuminated ring indicates that the battery is ready to charge or that the charging process is in progress. This way you will be kept informed of the status of the charging station.Protected against wind and weather In addition to rainwater, a charging station can also be exposed to dust and unauthorized use. That is why the Technivolt 1100 has a protection class of IP54. This means that it is well protected against dust, unwanted contact and splash water. Applicable to 1-phase and 3-phase connections The Technivolt 1100 & 1100 Smart charging stations are suitable for charging the car with a minimum of 1.4kW and a maximum of 11kW. With this you can charge any electric car! The Technivolt 1100 11 kW supports both 1-phase and 3-phase electricity connections. Different connectivity options The charging points can be connected to WiFi, LAN and GSM (3G+4G – Micro-Sim). The web interface is currently only accessible locally. For private and semi-public charging The Technivolt 1100 SMART makes it possible for you to charge quickly and safely at home. Charging via the regular socket not only entails considerably longer charging times, but also a high security risk. You can install the Technivolt 1100 SMART in various ways, such as under the carport, in the underground car park, in the driveway or on a post. In addition, the Technivolt 1100 SMART can also be used ideally as a charging station in semi-public spaces thanks to its functions. The charging station is suitable if you want to create a controlled charging infrastructure, such as charging points on company premises, in parking garages or in the parking lot of the supermarket. Charge management with multiple charging points If a parking space is equipped with several charging points, the house/mains connection is the limiting factor of the charging current at the charging point. TechniVolt's charging management offers the possibility to optimally adjust the charging current of multiple charging points to the available maximum current and distribute it to the connected electric cars. The load distribution can be static, dynamic and time dependent.Energy management & PV system integration The Technivolt 1100 SMART can be integrated into a power management system, such as a compatible PV system, via LAN using the EEBUS protocol. This makes it possible to charge the electric vehicle with excess solar energy. An interface for the SMA Sunny Home Manager is already integrated and can be activated via the web interface. Integrated MID meter The charging station has an integrated MID-certified energy meter, with which the power consumption can be measured and billed. Ideal for billing company cars or settling costs with tenants. Lower installation costs thanks to integrated DC fault current detection Now it gets very technical, but definitely important! The Technivolt 1100 SMART already has integrated electronic detection of smooth DC fault currents in the range of IΔn ≥ 6 mA, as prescribed by DIN EN 61851-1 for electric vehicles. It ensures that the vehicle's power supply is disconnected in the event of a DC fault current greater than 6 mA. For the electrician who connects the charging station, this means that he only needs a type A earth leakage circuit breaker. Installation by professionals An expert electrician is required for installation, repair or maintenance! The professional also has the responsibility to report to the local network operator/energy supplier. Features Fast charging with from 1.4kW - 11kW Type 2 charging cable LED status indicator Suitable for private and semi-public charging Applicable to 1-phase and 3-phase connections Plug & Batch in accordance with ISO 15118 Start charging station with and without extra authorization To be secured with an RFID card (max. 1000 cards) Integrated DC fault current detection Advanced features energy management, power management and integrated meter

This product is for mounting the Technivolt stainless steel stand Fix the mounting plate professionally with 6x M10 stainless steel bolt anchors. professional with 6x M10 bolt anchors. Make sure that the length of the bolt anchors is adapted to the site conditions. Use other (e.g. longer) fixing anchors as an alternative. To prevent corrosion, it is recommended to use only stainless steel material.

Cable hanger + plug holder in one. Suitable for all charging cables with type 2 plugsQuick and easy wall mounting with three screw

The Technivolt 100 charging station enables fast and safe charging at home. The charging station can be mounted on the wall or on a pole. Thanks to the charging capacity of 11kW, the Technivolt 100 can charge electric vehicles quickly and effectively. The charging station is equipped with a type 2 charging plug and can charge most electric cars in Europe. The charging station can be secured with RFID cards to prevent unauthorized charging. Access security with RFID If the charging station for electric vehicles is freely accessible in the driveway or in the carport, access protection that prevents unauthorized persons from charging makes sense. You can use up to 1000 RFID cards on the Technivolt 100. Two RFID cards are included as standard. Additional RFID cards are available separately. Protected against wind and weather In addition to rainwater, a charging station can also be exposed to dust and unauthorized use. That is why the Technivolt 1100 has a protection class of IP54. This means that it is well protected against dust, unwanted contact and splash water. Applicable to 1-phase and 3-phase connections The Technivolt 100 Smart charging stations are suitable for charging the car with a minimum of 1.4kW and a maximum of 11kW. With this you can charge any electric car! The Technivolt 100 11 kW supports both 1-phase and 3-phase electricity connections. For private charging at home The Technivolt 100 makes it possible for you to charge quickly and safely at home. Charging via the regular socket not only entails considerably longer charging times, but also a high security risk. You can install the Technivolt 100 in different ways, such as under the carport, in the driveway or on a post. Lower installation costs thanks to integrated DC fault current detectionNow it gets very technical, but definitely important! The Technivolt 100 already has integrated electronic detection of smooth DC fault currents in the range of IΔn ≥ 6 mA, as prescribed by DIN EN 61851-1 for electric vehicles. It ensures that the vehicle's power supply is disconnected in the event of a DC fault current greater than 6 mA. For the electrician who connects the charging station, this means that he only needs a type A earth leakage circuit breaker. Features Fast charging with 11kW Type 2 charging cable LED status indicator Suitable for private charging IP54 weatherproof Applicable to 1-phase and 3-phase connections Start charging station with and without extra authorization To be secured with an RFID card (max. 1000 cards) Integrated DC fault current detection

This product is for mounting the Technivolt stainless steel standFoundation anchoring for maximum safety, stability and protection.

Technivolt 2200 SMART is a charging station with a type 2 charging cable that is permanently integrated into the charging station. It meets the European standard and can charge most electric cars in Europe. With a charging capacity of 22 kW, the Technivolt 2200 SMART can charge electric vehicles quickly and effectively. The charging station can be secured with RFID cards to prevent unauthorized charging. It also features an LED status display, which shows the charging status at a glance. The Technivolt 2200 SMART offers similar features to the Technivolt 1100 SMART. In addition, the 2200 SMART can charge with a maximum power of 22kW. Furthermore, the 2200 SMART, like the 1100 SMART, is equipped with an additional display and the integrated MID meter. Plug & Batch ISO 15118 The charging station uses Plug & Charge according to ISO 15118, which ensures secure authentication of the vehicle without additional charging authorization, such as an RFID card. As soon as the compatible electric car is connected via the charging cable, the charging process starts automatically. Access security with RFID If the charging station for electric vehicles is freely accessible in the driveway or in the carport, access protection that prevents unauthorized persons from charging makes sense. You can use up to 1000 RFID cards on the Technivolt 1100 Smart. Two RFID cards are included as standard. Additional RFID cards are available separately. LED status display The colored illuminated ring indicates that the battery is ready to charge or that the charging process is in progress. This way you will be kept informed of the status of the charging station. Protected against wind and weather In addition to rainwater, a charging station can also be exposed to dust and unauthorized use. That is why the Technivolt 1100 has a protection class of IP54. This means that it is well protected against dust, unwanted contact and splash water. Applicable to 1-phase and 3-phase connections The Technivolt 1100 & 1100 Smart charging stations are suitable for charging the car with a minimum of 1.4kW and a maximum of 11kW. With this you can charge any electric car! The Technivolt 1100 11 kW supports both 1-phase and 3-phase electricity connections. Different connectivity options The charging points can be connected to WiFi, LAN and GSM (3G+4G – Micro-Sim). The web interface is currently only accessible locally. For private and semi-public charging The Technivolt 1100 SMART makes it possible for you to charge quickly and safely at home. Charging via the regular socket not only entails considerably longer charging times, but also a high security risk. You can install the Technivolt 1100 SMART in various ways, such as under the carport, in the underground car park, in the driveway or on a post. In addition, the Technivolt 1100 SMART can also be used ideally as a charging station in semi-public spaces thanks to its functions. The charging station is suitable if you want to create a controlled charging infrastructure, such as charging points on company premises, in parking garages or in the parking lot of the supermarket. Charge management with multiple charging points If a parking space is equipped with several charging points, the house/mains connection is the limiting factor of the charging current at the charging point. TechniVolt's charging management offers the possibility to optimally adjust the charging current of multiple charging points to the available maximum current and distribute it to the connected electric cars. The load distribution can be static, dynamic and time dependent. Energy management & PV system integration The Technivolt 1100 SMART can be integrated into a power management system, such as a compatible PV system, via LAN using the EEBUS protocol. This makes it possible to charge the electric vehicle with excess solar energy. An interface for the SMA Sunny Home Manager is already integrated and can be activated via the web interface. Integrated MID meter The charging station has an integrated MID-certified energy meter, with which the power consumption can be measured and billed. Ideal for billing company cars or settling costs with tenants. Lower installation costs thanks to integrated DC fault current detection Now it gets very technical, but definitely important! The Technivolt 1100 SMART already has integrated electronic detection of smooth DC fault currents in the range of IΔn ≥ 6 mA, as prescribed by DIN EN 61851-1 for electric vehicles. It ensures that the vehicle's power supply is disconnected in the event of a DC fault current greater than 6 mA. For the electrician who connects the charging station, this means that he only needs a type A earth leakage circuit breaker. Features Fast charging with 1.4kW – 22kW Type 2 charging cable LED status indicator Suitable for private and semi-public charging Plug & Batch in accordance with ISO 15118 Applicable to 1-phase and 3-phase connections Start charging station with and without extra authorization To be secured with an RFID card (max. 1000 cards) Integrated DC fault current detection Advanced features energy management, power management and integrated meter

The Technivolt 101 charging station enables fast and safe charging at home. The charging station can be mounted on the wall or on a pole. Thanks to the charging capacity of 11kW, the Technivolt 101 can charge electric vehicles quickly and effectively. The charging station is equipped with a type 2 charging plug and can charge most electric cars in Europe. The charging station can be secured with RFID cards to prevent unauthorized charging. Access security with RFID If the charging station for electric vehicles is freely accessible in the driveway or in the carport, access protection that prevents unauthorized persons from charging makes sense. You can use up to 1000 RFID cards on the Technivolt 100. Two RFID cards are included as standard. Additional RFID cards are available separately. Protected against wind and weather In addition to rainwater, a charging station can also be exposed to dust and unauthorized use. That is why the Technivolt 1101 has a protection class of IP54. This means that it is well protected against dust, unwanted contact and splash water. Applicable to 1-phase and 3-phase connections The Technivolt 101 Smart charging stations are suitable for charging the car with a minimum of 1.4kW and a maximum of 11kW. With this you can charge any electric car! The Technivolt 101 11 kW supports both 1-phase and 3-phase electricity connections. For private charging at home The Technivolt 101 makes it possible for you to charge quickly and safely at home. Charging via the regular socket not only entails considerably longer charging times, but also a high security risk. You can install the Technivolt 101 in different ways, such as under the carport, on the driveway or on a post. Now it gets very technical, but definitely important! The Technivolt 101 already has integrated electronic detection of smooth DC fault currents in the range of IΔn ≥ 6 mA, as prescribed by DIN EN 61851-1 for electric vehicles. It ensures that the vehicle's power supply is disconnected in the event of a DC fault current greater than 6 mA. For the electrician who connects the charging station, this means that he only needs a type A earth leakage circuit breaker. Features Fast charging with 11kW Type 2 charging cable LED status indicator Suitable for private charging IP54 weatherproof Applicable to 1-phase and 3-phase connections Start charging station with and without extra authorization To be secured with an RFID card (max. 1000 cards) Integrated DC fault current detection Lower installation costs thanks to integrated DC fault current detection

De Technivolt stainless steel stand for wallbox is geschikt voor de Technivolt 1100, 1100 SMART en 2200 SMART laadpunten. Deze standaard is ontworpen voor de installatie van één laadpunt. Bij de standaard worden de benodigde bevestigingsmaterialen voor het laadpunt meegeleverd. De standaard is gemaakt van hoogwaardig roestvrij staal en is gemakkelijk te installeren. Met behulp van deze standaard kan het laadpunt vrijstaand worden geplaatst, wat diverse voordelen met zich meebrengt. Het zorgt niet alleen voor een visueel aantrekkelijke opstelling, maar biedt ook maximale flexibiliteit wat betreft de locatie en vereist geen boren in de woning of het gebouw. De montage opties Funderingsverankering Voor maximale veiligheid en stabiliteit en bescherming. Bekijk productBoutanker Voor montage op een betonnen fundering. Bekijk product

De Technivolt stainless steel stand for wallbox is geschikt voor de Technivolt 1100, 1100 SMART en 2200 SMART laadpunten. Deze standaard is ontworpen voor de installatie van twee laadpunten. Bij de standaard worden de benodigde bevestigingsmaterialen voor het laadpunt meegeleverd. De standaard is gemaakt van hoogwaardig roestvrij staal en is gemakkelijk te installeren. Met behulp van deze standaard kan het laadpunt vrijstaand worden geplaatst, wat diverse voordelen met zich meebrengt. Het zorgt niet alleen voor een visueel aantrekkelijke opstelling, maar biedt ook maximale flexibiliteit wat betreft de locatie en vereist geen boren in de woning of het gebouw. De montage opties Funderingsverankering Voor maximale veiligheid en stabiliteit en bescherming. Bekijk productBoutanker Voor montage op een betonnen fundering. Bekijk product

The RFID card is suitable for identification at all TECHNIVOLT charging stations.

Technivolt 2200 SMART is a charging station with a type 2 charging cable that is permanently integrated into the charging station. It meets the European standard and can charge most electric cars in Europe. With a charging capacity of 22 kW, the Technivolt 2200 SMART can charge electric vehicles quickly and effectively. The charging station can be secured with RFID cards to prevent unauthorized charging. It also features an LED status display, which shows the charging status at a glance. The Technivolt 2200 SMART offers similar features to the Technivolt 1100 SMART. In addition, the 2200 SMART can charge with a maximum power of 22kW. Furthermore, the 2200 SMART, like the 1100 SMART, is equipped with an additional display and the integrated MID meter. Plug & Batch ISO 15118 The charging station uses Plug & Charge according to ISO 15118, which ensures secure authentication of the vehicle without additional charging authorization, such as an RFID card. As soon as the compatible electric car is connected via the charging cable, the charging process starts automatically. Access security with RFID If the charging station for electric vehicles is freely accessible in the driveway or in the carport, access protection that prevents unauthorized persons from charging makes sense. You can use up to 1000 RFID cards on the Technivolt 1100 Smart. Two RFID cards are included as standard. Additional RFID cards are available separately. LED status display The colored illuminated ring indicates that the battery is ready to charge or that the charging process is in progress. This way you will be kept informed of the status of the charging station. Protected against wind and weather In addition to rainwater, a charging station can also be exposed to dust and unauthorized use. That is why the Technivolt 1100 has a protection class of IP54. This means that it is well protected against dust, unwanted contact and splash water. Applicable to 1-phase and 3-phase connections The Technivolt 1100 & 1100 Smart charging stations are suitable for charging the car with a minimum of 1.4kW and a maximum of 11kW. With this you can charge any electric car! The Technivolt 1100 11 kW supports both 1-phase and 3-phase electricity connections. Different connectivity options The charging points can be connected to WiFi, LAN and GSM (3G+4G – Micro-Sim). The web interface is currently only accessible locally. For private and semi-public charging The Technivolt 1100 SMART makes it possible for you to charge quickly and safely at home. Charging via the regular socket not only entails considerably longer charging times, but also a high security risk. You can install the Technivolt 1100 SMART in various ways, such as under the carport, in the underground car park, in the driveway or on a post. In addition, the Technivolt 1100 SMART can also be used ideally as a charging station in semi-public spaces thanks to its functions. The charging station is suitable if you want to create a controlled charging infrastructure, such as charging points on company premises, in parking garages or in the parking lot of the supermarket. Charge management with multiple charging points If a parking space is equipped with several charging points, the house/mains connection is the limiting factor of the charging current at the charging point. TechniVolt's charging management offers the possibility to optimally adjust the charging current of multiple charging points to the available maximum current and distribute it to the connected electric cars. The load distribution can be static, dynamic and time dependent. Energy management & PV system integration The Technivolt 1100 SMART can be integrated into a power management system, such as a compatible PV system, via LAN using the EEBUS protocol. This makes it possible to charge the electric vehicle with excess solar energy. An interface for the SMA Sunny Home Manager is already integrated and can be activated via the web interface. Integrated MID meter The charging station has an integrated MID-certified energy meter, with which the power consumption can be measured and billed. Ideal for billing company cars or settling costs with tenants. Lower installation costs thanks to integrated DC fault current detection Now it gets very technical, but definitely important! The Technivolt 1100 SMART already has integrated electronic detection of smooth DC fault currents in the range of IΔn ≥ 6 mA, as prescribed by DIN EN 61851-1 for electric vehicles. It ensures that the vehicle's power supply is disconnected in the event of a DC fault current greater than 6 mA. For the electrician who connects the charging station, this means that he only needs a type A earth leakage circuit breaker. Features Fast charging with 1.4kW – 22kW Type 2 charging cable LED status indicator Suitable for private and semi-public charging Plug & Batch in accordance with ISO 15118 Applicable to 1-phase and 3-phase connections Start charging station with and without extra authorization To be secured with an RFID card (max. 1000 cards) Integrated DC fault current detection Advanced features energy management, power management and integrated meter