MCO Home | Groothandel smart home oplossingen

Over MCO Home

Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.

MCOHome CO2 Sensor

Power source: 12V

The MCO Home CO2 sensor is an air quality detector for monitoring CO2. The device also measures temperature, humidity and monitors the room for volatile organic compounds (VOC). The measured information is visible on the display and is sent to the gateway via Z-Wave. The detector is available in 2 variants - 230V and 12V DC. Installation instructions The 230V variant is not suitable for mounting in a standard flush-mounted box. This is due to the shape of the built-in part. The 12V variant is suitable for mounting on a standard flush-mounted box. The product has mounting holes at 60mm. FeaturesReal-time monitoring of CO2, humidity, temperature and VOCTempered Glass display with touch buttonsManual calibration possibleThe sensor has two holes that fit on a standard flush-mounted box li>

Product number: MH9-CO2-WD

€139.00*

MCOHome Water Heating Thermostat

Color: Black

The MH7 thermostat is available in two versions - one for water-controlled heating and one for electric heating. Both versions have a display, touch buttons and report the status to the Z-Wave controller. In addition to temperature, the device alsomeasures humidity.FeaturesPower supply via 230V ACTempered glass display with touch buttonsRelay: MH7-EH - 16A and MH7-WH - 5ABoth thermostats are available in white and black

Product number: MH7H-WHB

€105.00*

MCOHome CO2 Sensor

Power source: 230V

The MCO Home CO2 sensor is an air quality detector for monitoring CO2. The device also measures temperature, humidity and monitors the room for volatile organic compounds (VOC). The measured information is visible on the display and is sent to the gateway via Z-Wave. The detector is available in 2 variants - 230V and 12V DC. Installation instructions The 230V variant is not suitable for mounting in a standard flush-mounted box. This is due to the shape of the built-in part. The 12V variant is suitable for mounting on a standard flush-mounted box. The product has mounting holes at 60mm. FeaturesReal-time monitoring of CO2, humidity, temperature and VOCTempered Glass display with touch buttonsManual calibration possibleThe sensor has two holes that fit on a standard flush-mounted box li>

Product number: MH9-CO2-WA

€139.00*

MCOHome External Sensor for MH7H series

Accessory for the MH7 thermostat

Product number: WT15

€6.00*

MCOHome Water Heating Thermostat

Color: White

The MH7 thermostat is available in two versions - one for water-controlled heating and one for electric heating. Both versions have a display, touch buttons and report the status to the Z-Wave controller. In addition to temperature, the device alsomeasures humidity.FeaturesPower supply via 230V ACTempered glass display with touch buttonsRelay: MH7-EH - 16A and MH7-WH - 5ABoth thermostats are available in white and black

Product number: MH7H-WH

€105.00*

MCOHome Electrical Heating Thermostat

Color: White

The MH7 thermostat is available in two versions - one for water-controlled heating and one for electric heating. Both versions have a display, touch buttons and report the status to the Z-Wave controller. In addition to temperature, the device also measures humidity.FeaturesPower supply via 230V ACTempered glass display with touch buttonsRelay: MH7-EH - 16A and MH7-WH - 5ABoth thermostats are available in white and black

Product number: MH7H-EH

€105.00*

MCOHome Multi-Sensor

A8-9 Sensor is an advanced Z-Wave Plus air quality monitor, with a 3.5-inch TFT display. The device contains built-in sensors for measuring temperature, humidity, PM2.5, CO2, VOC, motion, light intensity, noise and smoke.FeaturesThe most advanced multisensor for air quality monitoring9-in-1 sensorPower supply via 12V DC, standard includedMeasured information shown on display

Product number: A8-9

€299.00*

MCOHome Boiler Thermostat White

MH3901-Z is a Z-Wave boiler thermostat, the device measures the indoor temperature and displays the temperature setting of the device. The thermostat has a NO/NC contact for controlling a potential-free contact. The thermostat can be operated via the Z-Wave network and via the touch buttons.FeaturesTempered glass displayBuilt-in relayAC or DC power supply (9-24V)

Product number: MH3901-Z

€135.00*

MCOHome PM 2.5 Sensor Air Quality monitor

Power source: 230V

MCO Home PM2.5 sensor is an air quality detector for monitoring particulate matter (PM2.5). The device also measures temperature and humidity. Measured information is visible on the display and is sent to the controller via Z-Wave. The detector is available in 2 variants – 230V and 12V DC. Installation instructions The 230V variant is not suitable for mounting in a standard flush-mounted box. This is due to the shape of the built-in part.The 12V variant is suitable for mounting on a standard flush-mounted box. The product has mounting holes at 60mm.Features Real-time monitoring of PM2.5, humidity and temperature Tempered glass display and physical buttons Manual calibration possible Mounting instruction: on the wall

Product number: MH10-PM2.5-WA

€125.00*

MCOHome Heat pump/Conventional AC system Thermostat

The MCO Home MH-F500 is a Z-Wave thermostat for controlling up to 3-stage heating and 2-stage cooling systems.The thermostat is controllable via Z-Wave or stand-alone. Operation of the thermostat is via the tempered glass touch display. The thermostat has convenient connection inputs for simplified installation. Important: The thermostat can be provided locally with schedule (7-day) with different profiles. This setting is not copied to the Z-Wave controller, if the thermostat is linked to a controller, the schedules can be set here. FeaturesThermostat for control of regular AC or heat pump systems;4.3 "LCM display with touch screenSimple connections for wiring, no screwdriver requiredWorks via Z-Wave and stand-alone

Product number: MH-F500

€145.00*

MCOHome Touch Panel Dimmer

Color: Black

Glass touch switch for dimming lights. The switches can be integrated via Z-Wave with a gateway. The series is available in white and black and suitable for standard round flush-mounting boxes.FeaturesBuilt-in scene activationSupport for active energy measurementInput for external switchWorks with phase cut-off and phase-up".

Product number: MH-DT411B

€89.00*

MCOHome Heat pump/Conventional AC system Thermostat

The MCO Home MH-3928 is a Z-Wave thermostat that can operate a maximum of 3 traps in 2-traps coel systems. The thermostaat is operated via Z-Wave of stand-alone (geen schema’s). Control of the thermostaat can be done via the touch button. The thermostaat heeft handige aansluit ingangen voor het vereenvoudigen van de installation. Identify Thermostaat for operation of regulate AC or warm pomp systems; 2.8 ”TFT display with touch button Schroef aansluitingen voor bedrading Works via Z-Wave

Product number: MH-3928

€129.00*

MCOHome Fan Coil Thermostat 4 pipe

Color: White

The MH8 thermostat is designed to control ventilation convectors. The thermostat measures the room temperature, displays the time and can control the fan speed based on the temperature. The thermostat has a display for displaying the measured and set information. The product also has touch buttons to operate the thermostat and can be controlled via Z-Wave.FeaturesCentral control of 4-pipe systemsAvailable in white and blackMade of tempered glassFits into a square flush box (British Standard)

Product number: MH8-FC4

€105.00*

MCOHome Touch Panel Switch 2 Button

Color: White

Glass touch switch for controlling electrical appliances and lighting. The switches can be integrated via Z-Wave with a gateway. The series is available in white and black and is suitable for standard round flush-mounting boxes.FeaturesBuilt-in scene activation

Product number: MH-S412

€75.00*

MCOHome Electrical Heating Thermostat

Color: Black

The MH7 thermostat is available in two versions - one for water-controlled heating and one for electric heating. Both versions have a display, touch buttons and report the status to the Z-Wave controller. In addition to temperature, the device also measures humidity.FeaturesPower supply via 230V ACTempered glass display with touch buttonsRelay: MH7-EH - 16A and MH7-WH - 5ABoth thermostats are available in white and black

Product number: MH7H-EHB

€105.00*

MCOHome PM 2.5 Sensor Air Quality monitor

Power source: 12V

MCO Home PM2.5 sensor is an air quality detector for monitoring particulate matter (PM2.5). The device also measures temperature and humidity. Measured information is visible on the display and is sent to the controller via Z-Wave. The detector is available in 2 variants – 230V and 12V DC. Installation instructions The 230V variant is not suitable for mounting in a standard flush-mounted box. This is due to the shape of the built-in part.The 12V variant is suitable for mounting on a standard flush-mounted box. The product has mounting holes at 60mm.Features Real-time monitoring of PM2.5, humidity and temperature Tempered glass display and physical buttons Manual calibration possible Mounting instruction: on the wall

Product number: MH10-PM2.5-WD

€125.00*

MCOHome Fan Coil Thermostat 4 pipe

Color: Black

The MH8 thermostat is designed to control ventilation convectors. The thermostat measures the room temperature, displays the time and can control the fan speed based on the temperature. The thermostat has a display for displaying the measured and set information. The product also has touch buttons to operate the thermostat and can be controlled via Z-Wave.FeaturesCentral control of 4-pipe systemsAvailable in white and blackMade of tempered glassFits into a square flush box (British Standard)

Product number: MH8-FC4B

€105.00*

MCOHome Touch Panel Switch 1 Button

Color: White

Glass touch switch for controlling electrical appliances and lighting. The switches can be integrated via Z-Wave with a gateway. The series is available in white and black and is suitable for standard round flush-mounting boxes.FeaturesBuilt-in scene activation

Product number: MH-S411

€69.00*

MCOHome Touch Panel Switch 2 Button

Color: Black

Glass touch switch for controlling electrical appliances and lighting. The switches can be integrated via Z-Wave with a gateway. The series is available in white and black and is suitable for standard round flush-mounting boxes.FeaturesBuilt-in scene activation

Product number: MH-S412B

€75.00*

MCOHome Touch Panel Switch 1 Button

Color: Black

Glass touch switch for controlling electrical appliances and lighting. The switches can be integrated via Z-Wave with a gateway. The series is available in white and black and is suitable for standard round flush-mounting boxes.FeaturesBuilt-in scene activation

Product number: MH-S411B

€69.00*

MCOHome Touch Panel Dimmer

Color: White

Glass touch switch for dimming lights. The switches can be integrated via Z-Wave with a gateway. The series is available in white and black and suitable for standard round flush-mounting boxes.FeaturesBuilt-in scene activationSupport for active energy measurementInput for external switchWorks with phase cut-off and phase-up".

Product number: MH-DT411

€89.00*

MCOHome Shutter Panel

Color: Black

Glass touch switch for controlling roller shutters. The switches can be integrated via Z-Wave with a gateway. The series is available in white and black and suitable for standard round flush-mounting boxes.FeaturesSupport for active energy measurementOperates with opening and closing onlyBuilt-in auto-calibration

Product number: MH-C421B

€79.00*

MCOHome - Fan Coil Thermostat 2 pipe

Color: Black

The MH8 thermostat is designed to control ventilation convectors. The thermostat measures the room temperature, displays the time and can control the fan speed based on the temperature. The thermostat has a display for displaying the measured and set information. The product also has touch buttons to operate the thermostat and can be controlled via Z-Wave.FeaturesCentral operation of 2-pipe systemsAvailable in white and blackMade of tempered glassFits into a square flush box (British Standard)

Product number: MH8-FCB

€105.00*

MCOHome - Fan Coil Thermostat 2 pipe

Color: White

The MH8 thermostat is designed to control ventilation convectors. The thermostat measures the room temperature, displays the time and can control the fan speed based on the temperature. The thermostat has a display for displaying the measured and set information. The product also has touch buttons to operate the thermostat and can be controlled via Z-Wave.FeaturesCentral operation of 2-pipe systemsAvailable in white and blackMade of tempered glassFits into a square flush box (British Standard)

Product number: MH8-FC

€105.00*

Getting started as a smart home professional and purchasing with a business discount? Register an account without obligation.

Take advantage of all the benefits that JDK Benelux has to offer, such as direct delivery from stock, business purchase prices and in-house technical support. JDK has a wide range of complementary smart home products and works mainly on the basis of (wireless) technologies such as Z-Wave, Zigbee and IP/LAN.

Want to become a customer? Then register via the button below.

Become a customer