Shelly Qubino Wave 1PM Mini
Product number:
QMSW–0A1P8EU
Manufacturer:
Shelly Wave
EAN:
3800235269145
Product information "Shelly Qubino Wave 1PM Mini"
The Shelly Qubino Wave 1PM Mini module is a Z-Wave 800 built-in switch with one output and one switch. The module supports active energy metering and is designed to control devices such as lighting, sockets, heaters and other electrical appliances. It is possible to control the module wirelessly via Z-Wave, as well as using a single wall switch.
The module can be powered with a voltage of 110-240V AC. The maximum load capacity is 8A. In addition, the module is equipped with multiple protection functions, including protection against overheating, overvoltage and overcurrent.
Features
- Z-Wave 800 series
- Maximum load capacity at 8A
- Protected against overheating
- Supports over-the-air firmware updates (OTA)
- Can be used with different types of switches
- S2 security and SmartStart suitable
- Format 29x35x16 mm
- Wire 0.5 to 1.5 mm²
Properties "Shelly Qubino Wave 1PM Mini"
| Communicatie & Protocol: | Z-Wave |
|---|---|
| Maximum load capacity: | 8A |
| Operating humidity: | 30% to 70% RH |
| Operating temperature: | -20°C to 40°C |
| Power source: | 110-240V AC, 50/60Hz |
| Protocol: | Z-Wave 800 |
Data according to manufacturer. Errors and changes reserved.
Downloads "Shelly Qubino Wave 1PM Mini"
Compatibility
| Controller | Controller FW | Device FW | Compatibility Status | Note |
|---|---|---|---|---|
| FIBARO Home Center 3 | 5.140 | Compatible | ||
| FIBARO Home Center 3 Lite | 5.140 | Compatible | ||
| Homey Pro | Partly compatible | No W and no kWh | ||
| Aeotec SmartThings Hub | Partly compatible | No W and no kWh |