DIN-rail adapters for safe and professional installation of the FIBARO modules. This is the DIN-rail adapter with S1 and S2 buttons.Advantages of the S1 and S2 buttonsThe S1 and S2 buttons enable control via the DIN railVia the S1 button the module can be added/deleted from the Z-Wave networkEasy identification of the modules thanks to colours and labels
DIN-rail adapters for safe and professional installation of the FIBARO modules. This is the DIN-rail adapter with S1 and S2 buttons.Advantages of the S1 and S2 buttonsThe S1 and S2 buttons enable control via the DIN railVia the S1 button the module can be added/deleted from the Z-Wave networkEasy identification of the modules thanks to colours and labels
The converter converts a 230V supply into 12V. Thanks to this solution, it is possible to continuously power the FIBARO Walli Controller and to switch on the LED ring and change its colour. The converter has a size of 21 x 38 x 40 (L x W x H) and fits into a flush-mounting box.FeaturesPermanent power supply for the Walli Controller (12V)Ensures that the LED can be used on the Walli ControllerMakes the Walli Controller a repeater in the Z-Wave network
DIN-rail adapters for safe and professional installation of the FIBARO modules. This is the DIN-rail adapter with S1 and S2 buttons.Advantages of the S1 and S2 buttonsThe S1 and S2 buttons enable control via the DIN railVia the S1 button the module can be added/deleted from the Z-Wave networkEasy identification of the modules thanks to colours and labels
DIN-rail adapters for safe and professional installation of the FIBARO modules. This is the DIN-rail adapter with S1 and S2 buttons.Advantages of the S1 and S2 buttonsThe S1 and S2 buttons enable control via the DIN railVia the S1 button the module can be added/deleted from the Z-Wave networkEasy identification of the modules thanks to colours and labels
DIN-rail adapters for safe and professional installation of the FIBARO modules. This is the DIN-rail adapter with S1 and S2 buttons.Advantages of the S1 and S2 buttonsThe S1 and S2 buttons enable control via the DIN railVia the S1 button the module can be added/deleted from the Z-Wave networkEasy identification of the modules thanks to colours and labels
DIN-rail adapters for safe and professional installation of the FIBARO modules. This is the DIN-rail adapter with S1 and S2 buttons.Advantages of the S1 and S2 buttonsThe S1 and S2 buttons enable control via the DIN railVia the S1 button the module can be added/deleted from the Z-Wave networkEasy identification of the modules thanks to colours and labels
The Heatit External Room Sensor is an external NTC sensor (10k Ohm) for measuring the temperature. The sensor has been specially developed for the Heatit thermostats. The sensor can be mounted directly on the wall or on a flush-mounted box. The sensor fits in a System 55 frame.
Installation instructions
It is not possible to connect the sensors in parallel or series.
When used in combination with a thermostat, dimmer or other products that radiate heat, it is recommended to mount the sensor under the other product.
The Rithum Switch Table Stand offers users the flexibility to place the Rithum switch anywhere in a room. Place the Rithum on a side table, sideboard, bedside table or reception desk. This gives others easy access to the control of the smart lighting, audio, climate control.
The Table Stand is made of black powder-coated metal. The color is matte black (RAL 9011). The dimensions in millimeters: W86 x H73.4 x D75
No standard cable is included. We recommend a 12V DC power supply (minimum 10W) or a USB to 12V converter cable. Mains supply is also possible via the grounding lug on the inside.
The Heatit External Room Sensor is an external NTC sensor (10k Ohm) for measuring the temperature. The sensor has been specially developed for the Heatit thermostats. The sensor can be mounted directly on the wall or on a flush-mounted box. The sensor fits in a System 55 frame.
Installation instructions
It is not possible to connect the sensors in parallel or series.
When used in combination with a thermostat, dimmer or other products that radiate heat, it is recommended to mount the sensor under the other product.
De Heatit Transformer is een compacte inbouw transformator voor Europese inbouwdozen. De transformator zet 230V AC om naar 12V DC, 5V DC, of 3,3V DC. Hierdoor kan je laagspanningsapparaten aansluiten op het lichtnet.
In combinatie met Heatit batterijadapters, waaronder de Temp2 Battery Adapter, kan de Heatit Transformer de batterijgevoede apparaten met netstroom voeden. Alle apparaten op een batterijen met een stroomverbruik tot 450mA bij 12V DC, 420mA bij 5V DC en 3,3V DC kunnen op de transformator worden aangesloten.
Verder kan de Heatit Transformer gebruikt worden met volgende producten:
FIBARO Smart Implant, FIBARO Walli ControllerMCO Home Boiler Thermostat, MCO Home CO2 Sensor (12V), MCO Home PM2.5 Sensor (12V) MCO Home Multi-Sensor A8-9Qubino 0-10V DimmerAeotec MultiSensor 6, Aeotec MultiSensor 7Kenmerken
Kenmerken
Compacte inbouw transformator
Eenvoudig te installerenWalli Controller: Permanente stroomvoorziening voor de Walli Controller. Zorgt dat de LED te gebruiken is van de Walli Controller
De Heatit DIN Transformer 24V is een compacte DIN rail gemonteerde transformator met een breedte van 51mm. De transformator zet 230V AC om naar 24V. De 24V voeding is speciaal ontwikkeld voor gebruik samen met de Heatit Z-Water2 en de 24V actuatoren. Maar deze voeding is zeker ook te gebruiken voor andere laagspanningsoplossingen zo is deze ook perfect te combineren met de Aqara G4 Deurbel. Kenmerken
DIN rail gemonteerd (35mm)51mm breed2 DIN breedte
24V DC 2.5A/60WVoltage verstelbaar tussen 23-25V
Built-in panel for various types of iPad models. The euFrame contains a power adapter and motion sensor. The sensor brings the iPad out of sleep mode and has a smart charging system that only charges the device when needed.FeaturesBuilt-in intelligent power supply and motion sensorProtected against overheating and overloadAcoustic alarm in case of unintended removal of iPadFor installation in a hollow wall
The Heatit External Room Sensor is an external NTC sensor (10k Ohm) for measuring the temperature. The sensor has been specially developed for the Heatit thermostats. The sensor can be mounted directly on the wall or on a flush-mounted box. The sensor fits in a System 55 frame.
Installation instructions
It is not possible to connect the sensors in parallel or series.
When used in combination with a thermostat, dimmer or other products that radiate heat, it is recommended to mount the sensor under the other product.
DIN-rail adapters for safe and professional installation of the FIBARO modules. This is the DIN-rail adapter with S1 and S2 buttons.Advantages of the S1 and S2 buttonsThe S1 and S2 buttons enable control via the DIN railVia the S1 button the module can be added/deleted from the Z-Wave networkEasy identification of the modules thanks to colours and labels