Shelly Wave PM Mini LR
The Shelly Wave PM Mini LR is a very compact Z-Wave 800 series energy monitoring module, designed for measuring the energy consumption of electrical devices and circuits. Thanks to its compact size, the module can easily be installed behind wall switches, power outlets or inside electrical back boxes where installation space is limited. The module supports both traditional Z-Wave mesh and Z-Wave Long Range, making it suitable for installations where extended wireless range is required.
The Wave PM Mini LR does not feature a relay output and is intended exclusively for energy monitoring. This allows the energy consumption of connected devices or circuits to be accurately measured without switching the connected load. This makes the module suitable for applications where insight into energy usage is required, for example for energy management or detecting abnormal consumption.
The module is powered by 110-240V AC and supports loads up to 16A. In addition, the Wave PM Mini LR is equipped with several protection mechanisms, including overheating, overvoltage and overcurrent protection. SmartStart and Z-Wave S2 security ensure quick and secure integration within a Z-Wave network.
Features
- Z-Wave 800 series with support for mesh and Long Range
- Compact energy monitoring module without relay output
- Suitable for accurate energy monitoring
- Maximum measurement current: 16A
- Power supply: 110-240V AC, 50/60Hz
- Active energy monitoring
- SmartStart for quick and easy installation
- S2 Security (Authenticated/Unauthenticated)
- Protected against overheating, overvoltage and overcurrent
- Supports over-the-air firmware updates (OTA)
- Low power consumption (< 0.3W)
- Compact dimensions: 29 x 35 x 16 mm
| Communicatie & Protocol: | Z-Wave |
|---|---|
| Maximum load capacity: | 16A (AC) |
| Operating humidity: | 30% to 70% RH |
| Operating temperature: | -20°C to 40°C |
| Power source: | 110-240V AC, 50/60Hz |
| Protocol: | Z-Wave 800 |
| Controller | Controller FW | Device FW | Compatibility Status | Note |
|---|---|---|---|---|
| FIBARO Home Center 3 | 5.140 | Compatible | ||
| FIBARO Home Center 3 Lite | 5.140 | Compatible | ||
| Homey Pro | Partly compatible | No W and no kWh | ||
| Aeotec SmartThings Hub | Partly compatible | No W and no kWh |