The FIBARO Dimmer 2 is a universal wireless dimmer module with energy consumption measurement. Applicable in 2- and 3-wire installations. The Dimmer 2 supports different types of lighting and dimming techniques. This is automatically detected by an intelligent algorithm. The Dimmer 2 also works stand-alone behind an existing switch. The module can be used in combination with a pulse switch for manual activation of scenes.FeaturesCan be used as stand-alone dimmer without intelligent functionsCan be used in 2-wire and 3-wire installationsAutomatic calibration based on type of lightingWorks with trailing edge and leading edge

Complementary product for the FIBARO Dimmer 2. The installation of the Bypass enables lighting with minimum energy consumption. Bypass is a device designed to work with FIBARO Dimmer 2 (FGD-212), to be used with LED bulbs or energy saving compact fluorescent lamps. FIBARO Bypass 2 prevents LEDs from flickering and turned off compact fluorescent lamps from glowing. In 2-wire connection FIBARO Bypass 2 reduces the minimum power of load required by the Dimmer for correct operation. FGB-002 provides powering of the Dimmer 2 in case of controlling low loads.

The Z-Wave dimmer from Technisat is designed to control dimmable lights up to 0.87A. The dimmer has an auto-calibration mechanism and works with phase cut and phase on. The switch operates as a pulse switch and works stand-alone without any intelligent functions. The device has support for scene activation via the switch and energy measurement.FeaturesSwitch includes support for scene activationIntegrate and control classic motors via Z-Wave and the switch Maximum load capacity is 0.87A and connection to 230V Suitable for switch material series of Busch and Jaeger, GIRA ST 55 and MertenInformation on gear series:The Technisat flush-mounted units work with the following gear series:Busch & Jaeger: Busch-Duro 2000® SI, Busch-Duro 2000® SI Linear, Reflex SI, Reflex SI Linear, future® linear, solo®, carat®, Busch-axcent®, alpha, Busch-balance® SIGIRA: GIRA System 55Merten: System M

The Flush Dimmer 0-10V is designed to control lighting or other electrical devices that operate on 0-10V. The module has a standard 0-10V output and a multifunctional input, for example for a push button.FeaturesPerfect to use for dimming lighting that works on 0-10VIntegrate 0-10V lighting, sensors and ventilationConnecting power 12-24 VDCMultifunctional input for connecting 0-10V sensorsInput can be used for sensors and switches

With this module you can wirelessly switch and dim your lamps or devices on or off via your smartphone! Your physical wall switch will continue to work as usual. Set up some fun scenes (scenarios) in your smart-home system or use the free app. For example, with this module you can automatically turn on your lights when the sun sets. Or dim your lights a bit in the middle of the night. FeaturesOpen sourceWorks stand-alone via WiFi 2.4 GhzBuilt-in web serverAccess Point and Client ModeSupported HTTP and/or UDP110-240VAC;0-220W Halogen with blue neutral wire0-200W LED with blue neutral wireMin. 10W without blue neutral wire or otherwise with Bypass.Protected against overheating and overloadWorks with MQTT< li>Works with Google Home or AlexaEasy to installRecessed, behind (wall) switchWorks with switch, pulse switch, hotel switch< li>Pulse switch for dimmingScene activation via AppESP8266 with 4MB flash/debug chipMax. load to be setNo blue neutral wire required for connectionManual

Z-Dim works with various light sources (from 1W), including: halogen and incandescent lamps, LED lighting, dimmable LED drivers and electronic transformers. The dimmer is equipped with an extra input, so that Z-Dim can easily be applied in a hallway or stairwell. The switch fits in frames of brands such as: GIRA System 55, Elko and Schneider Exxact. Z-Dim is supplied with 2 rotary switches and central plates in the colours: RAL9010 and RAL9003. Important: Heatit Z-Dim requires L + N. The connection of a light source is not required, Z-Dim can also control Z-Wave devices via association and scene activation.

The Z-Wave dimmer from Technisat is designed to control dimmable lights up to 0.87A. The dimmer has an auto-calibration mechanism and works with phase cut and phase on. The switch operates as a pulse switch and works stand-alone without any intelligent functions. The device has support for scene activation via the switch and energy measurement.FeaturesSwitch includes support for scene activationIntegrate and control classic motors via Z-Wave and the switch Maximum load capacity is 0.87A and connection to 230V Suitable for switch material series of Busch and Jaeger, GIRA ST 55 and MertenInformation on gear series:The Technisat flush-mounted units work with the following gear series:Busch & Jaeger: Busch-Duro 2000® SI, Busch-Duro 2000® SI Linear, Reflex SI, Reflex SI Linear, future® linear, solo®, carat®, Busch-axcent®, alpha, Busch-balance® SIGIRA: GIRA System 55Merten: System M

The Wall Plug Dimmer is an intermediate plug for dimming lighting. The plug remembers the last dim position when switched off. The range is a minimum of 6W to a maximum of 250W. The intermediate plug is also equipped with an overload protection.Please note: The Everspring Z-Wave Dimmer Mini Plug has a no input for a pin ground. FeaturesPlug type F (NL) (grounding)Maximum load capacity 250WPlug & play installation and physical button Compact design

An intelligent integrated dimmer for controlling LED, halogen lighting and supports different dimming techniques. The device is equipped with the automatic calibration function, active energy and current measurement and other functions known from the FIBARO module. Designed for quick installation in a flush-mounting box from 40 mm (depth). The Walli switch can also be used for manual activation of scenes.FeaturesControl the lighting remotely, via the switch and voice assistantsThe colour of the LED ring can be adjusted according to the user's wishesActively measures power and energy consumptionNotification in case of malfunction

The Nice Dimmer-Control has been developed for controlling different types of light sources. The Dimmer-Control supports two types of lighting dimming techniques, including trailing edge and leading edge. Thanks to the intelligent calibration, this is automatically detected. The Dimmer-Control can be used in 2- and 3-wire installations. The module measures the active power consumption of the connected lighting as standard. This product is intended for connection to FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The device can be operated and automated via the Z-Wave network. Features Soft-start function Built-in active power and energy measurement function Intelligent light source detection via automatic calibration Works with various types of switches, including pulse, toggle and toggle switch

An intelligent integrated dimmer for controlling LED, halogen lighting and supports different dimming techniques. The device is equipped with the automatic calibration function, active energy and current measurement and other functions known from the FIBARO module. Designed for quick installation in a flush-mounting box from 40 mm (depth). The Walli switch can also be used for manual activation of scenes.Units are for the use of Walli in multiple cover frames or with other brands of switching material. When using Walli frames, the mounting frame, the frame and the button with light guide must be ordered. A mounting frame is always required when using other brand switching material, the button adapter is also required with GIRA and Legrand cover materials.FeaturesControl the lighting remotely, via the switch and voice assistantsThe colour of the LED ring can be adjusted to the wishes of the userActively measures current and energy consumptionNotification in case of malfunction

Important: The product and module integration is still in the testing phase. The full implementation is planned for early 2023. Please contact us for more information. The DALI to Z-Wave Controller has been developed for the control of light sources that be compatible with the DALI system. The module allows you to control one light source or a group of light sources via broadcast mode and single group addressing. The module can switch and dim the light sources. Thanks to Z-Wave communication, the module can be operated and automated with the FIBARO System. The Z-Wave to DALI Controller can also be operated wirelessly with on/off and dim commands (via associations). For example with the FIBARO Dimmer 2 & FIBARO Switch 2 Features Support for DT6  Switch and dim DALI light sources via FIBARO Replaces 2 extra wires with wireless control Works with DALI single light source or group of light sources Thanks to Z-Wave communication, the module is easy to add to FIBARO

The Aeotec Nano Dimmer is a flush mount module for controlling and dimming lighting via Z-Wave. The module is designed to be placed in a flush-mounting box and can be connected to a wall switch. The Aeotec Nano Dimmer works with 2- and 3-wire installations. Optional: Aeotec Dimmer Bypass for low wattage lightingFeaturesControl dimmable lighting via Z-WaveMaximum load 1,2AWorks in 2- and 3-wire setupSupports energy measurement

The Shelly Pro Dimmer 2PM is a DIN rail mountable dimmer. The module supports active energy measurement and is designed for dimming 2 light sources. The smart dimmer works with WiFi, LAN and Bluetooth and is therefore compatible with Homey, Smartthings and Home Assistant, among others. Thanks to the WiFi protocol, you can also use it without a hub via the Shelly Smart Home App. You simply place the dimmer in your distribution box on a DIN rail, you can dim 2 light sources with a maximum of 200 Watts per channel.Supported light sourcesIncandescent lampDimmable LED and CFLDimmable electronic transformersFeatures  Open source  ESP32 chip on board Works stand-alone via LAN or WiFi 2.4 Ghz  Bluetooth for easy pairing  Built-in web server  Access Point and Client Mode  Supported HTTP and/or UDP  Supported mjS scripting  110-240VAC Maximum 200 watts per channelLeading edgeTrailing edge Current measurement  Protected against overload  Protected against overheating  Protected against voltage peaks  Free Android or IOS Shelly Cloud App  Works with MQTT  Easy to install  Built-in distribution box, DIN rail  Scene activation via App

The Shelly Wave Pro Dimmer 2PM is a DIN-rail-mounted dimmer. The module supports active energy measurement and is designed to dim 2 light sources. The Wave Pro Dimmer 2PM can be operated with 2 switches. The smart dimmer works with Z-Wave, using a Z-Wave 800 chipset, and is compatible with Homey, Home Center 3, and other platforms such as Home Assistant and SmartThings. You can easily install the dimmer in your fuse box on a DIN rail, allowing you to dim 2 light sources with a maximum of 200 watts per channel. Note! The dimmer does not yet have full support on the mentioned platforms. Check the current compatibility via the manual link below.Based on our own tests on the HC3, it seems possible to add the unit after several attempts, resulting in a usable endpoint for both channels. Note that the unit needs to be added in Singlechannel mode (see associations) and corrected. Supported Light Sources Incandescent bulbs Dimmable LED and CFL Dimmable electronic transformers Features 110-240VAC Z-Wave 800 chipset Maximum 200 watts per channel (2 channels) S2 security Trailing edge Power measurement Overload protection Overheat protection Surge protection Fuse box installation, DIN rail 19mm width Manual

The Shelly Pro Dimmer 1PM is a DIN rail mountable dimmer. The module supports active energy measurement and is designed for dimming 1 light source. The smart dimmer works with WiFi, LAN and Bluetooth and is therefore compatible with Homey, Smartthings and Home Assistant, among others. Thanks to the WiFi protocol, you can also use it without a hub via the Shelly Smart Home App. You simply place the dimmer in your distribution box on a DIN rail, you can dim 1 light source with a maximum of 200 Watts. Supported light sources Light bulb Dimmable LED and CFL Dimmable electronic transformers Features  Open source  ESP32 chip on board Works stand-alone via LAN or WiFi 2.4 Ghz  Bluetooth for easy pairing  Built-in web server  Access Point and Client Mode  Supported HTTP and/or UDP  Supported mjS scripting  110-240VAC Maximum 200 wattsLeading edge Trailing edge  Current measurement  Protected against overload  Protected against overheating  Protected against voltage peaks  Free Android or IOS Shelly Cloud App  Works with MQTT  Easy to install  Built-in distribution box, DIN rail  Scene activation via App

An intelligent integrated dimmer for controlling LED, halogen lighting and supports different dimming techniques. The device is equipped with the automatic calibration function, active energy and current measurement and other functions known from the FIBARO module. Designed for quick installation in a flush-mounting box from 40 mm (depth). The Walli switch can also be used for manual activation of scenes.FeaturesControl the lighting remotely, via the switch and voice assistantsThe colour of the LED ring can be adjusted according to the user's wishesActively measures power and energy consumptionNotification in case of malfunction

The Shelly Plus Dimmer 0-10V is designed to control 0-10V dimmable drivers wirelessly via WiFi. And the great thing is, you can also use the wall switch.Switch on/off and dim your lights wirelessly with your smartphone, from anywhere in the world. Easily create smart scenes (scenarios) and set timers in the free App for your home automation. For example, automatically turn on your lights at sunset or automatically dim your lights at night between 11:00 PM and 6:00 AM. Voice control with Siri, Google Assistant or Amazon Alexa is also possible.Features Open source, no hub required Works stand-alone via WiFi 2.4 Ghz Bluetooth for easy connection to your home WiFi< li> Built-in web server Access Point and Client Mode Supported HTTP and/or UDP 110-240VAC; Output max. 10VDC and 0.35W Protected against overheating and overload Works with MQTT Works with Google Home or Alexa Easy to install Recessed, behind (wall) switch Works with switch, pulse switch, hotel switch li> Pulse switch for dimming Scene activation via App ESP32 with 4MB flash/debug chip Wi-Fi Fi Range Extender & BLE GatewayScripting, webhooks, MQTT, WebSocket, HTTPS, UDP, TLS and custom certificates< div>Manual

Z-Dim works with various light sources (from 1W), including: halogen and incandescent lamps, LED lighting, dimmable LED drivers and electronic transformers. The dimmer is equipped with an extra input, so that Z-Dim can easily be applied in a hallway or stairwell. The switch fits in frames of brands such as: GIRA System 55, Elko and Schneider Exxact. Z-Dim is supplied with 2 rotary switches and central plates in the colours: RAL9010 and RAL9003. Important: Heatit Z-Dim requires L + N. The connection of a light source is not required, Z-Dim can also control Z-Wave devices via association and scene activation.

The Shelly Wave Pro Dimmer 1PM is a DIN-rail-mounted dimmer. The module supports active energy measurement and is designed to dim a single light source. The Wave Pro Dimmer 1PM can be operated with 2 switches. The smart dimmer works with Z-Wave, using a Z-Wave 800 chipset, and is compatible with Homey, Home Center 3, and other platforms such as Home Assistant and SmartThings. You can easily install the dimmer in your fuse box on a DIN rail, allowing you to dim one light source with a maximum of 200 watts. Note! The dimmer does not yet have full support on the mentioned platforms. Check the current compatibility via the manual link below. Based on our own tests on the HC3, it seems possible to add the unit after several attempts, resulting in a usable endpoint. Note that the unit needs to be added in Singlechannel mode (see associations) and corrected. Supported Light Sources Incandescent bulbs Dimmable LED and CFL Dimmable electronic transformers Features 110-240VAC Z-Wave 800 chipset S2 security Maximum 200 watts (1 channel) 2 switch contacts Trailing edge Power measurement Overload protection Overheat protection Surge protection Fuse box installation, DIN rail 19mm width Manual

The Heatit ZM Dimmer is a Z-Wave built-in dimmer with active consumption measurement. The ZM Dimmer can be used in 2- and 3-wire installations. The dimmer can be used to control LED lighting from 5W – 250W. The module is equipped with an intelligent auto-calibration mechanism and works on most low loads. With the auto calibration, the dimmer checks the minimum and maximum load capacity. You can adjust the min. load capacity via the physical button on the module and via a Z-Wave gateway. When connecting low loads, it is recommended to use a bypass. The ZM Dimmer has two inputs for connecting a switch. The first input is for controlling the connected lamp. The second input is for scene activation only. In addition, the ZM Dimmer is equipped with various protections, including overload protection, overvoltage and overheating. Finally, the ZM Dimmer can be used as a switch for non-dimmable sources for switching LED lighting, for example. A 3-wire installation is required. Features Z-Wave 800 LED: 5 – 250W Installation in 2- and 3-wire installations Second input for scene switch Works with trailing edge and trailing edge Manual min. dimmability setting via physical button Auto calibration for min & max. dimmability setting Protections against: overload, overvoltage, short circuit and overheating

Complementary product for the Nice Dimmer. The installation of the LED Adaptor (similar to the Bypass) enables lighting with minimal energy consumption. The LED Adaptor is designed for the Nice Dimmer. The Nice LED Adaptor prevents LED flickering and the illumination of switched-off lamps. In a two-wire connection, the Nice LED Adaptor reduces the minimum power required by the dimmer for proper operation. The LED Adaptor ensures the power supply to the dimmer in low-load connections.

Shelly Pro Dimmer 0/1-10V PM is a smart DIN-mountable dim controller that allows you to control dimmable drivers remotely via a mobile phone, tablet, PC, or home automation system. The device can operate independently within a local Wi-Fi network, but it can also be controlled via cloud home automation services. It is a current source controller and supports both 0-10V and 1-10V types of drivers.FeaturesDIN-rail mountingEnergy meteringBluetooth connectivityBLE gateway: Facilitates communication between BLE and Wi-Fi devices.Wi-FiWi-Fi Range ExtenderEthernet connectivityScripting: Ability to create automation scenarios via scripts.Advanced scheduling: Supports detailed schedules and routines throughout the year, with extensive time adjustments from seconds to months, including brightness settings, transition duration, and the flip value of the dim signal.Auto on/off timersWebhooks: Supports automation through lightweight, event-driven communication with other devices.Compatibility: Highly compatible with third-party home automation systems, including KNX.No hub requiredKVS (Key-value storage)Virtual and BTHome components: A special set of components that are not initially present in the device and can be dynamically created by the user.Diverse driver integration: Supports 0-10V and 1-10V drivers (lights, motors, valves, etc.).Night mode: Sets a specific brightness for lights during the night.Switch/button input mode: Flexible control inputs through switches and/or buttons:Single-button dim controlDual-button dim controlMinimum power-on brightness: Sets brightness to 3% (default value) when powered on if the current brightness is lower than the 'minimum power-on brightness'. This does not apply if a custom transition is set in schedules or actions.Min/max brightness: Refines the range of the dim signal for more precise brightness control at the output.Button fade rate: Controls how quickly the output brightness changes when the button(s) are held down. The default value is 3x.Button presets: State applied during a double-click event. The default value is 100%.Manual

The Shelly Dimmer 0/1-10V PM Gen3 (the device) is a smart dimmer controller that allows you to dim drivers remotely via your mobile phone, tablet, PC, or a home automation system. The device can operate independently on a local Wi-Fi network or via cloud-based home automation services. The device is a current sourcing controller and supports both 0-10V and 1-10V drivers.FeaturesBluetooth: The device complies with the Bluetooth standard and can connect with other Bluetooth devices to exchange data over short distances.BLE GatewayWi-FiWi-Fi Range ExtenderScriptingBasic schedules: Supports weekly schedules and routines, including setting brightness, transition duration, and the flip value of the dim signal.Advanced schedules: Offers detailed schedules and routines for the entire year, with extended time settings from seconds to months, including brightness setting, transition duration, and flip value of the dim signal.Shelly Plus Add-On compatibleAuto on/off timersLocal actions: Allows you to create automation scenarios within the local Wi-Fi network, including setting brightness, transition duration, and the flip value of the dim signal.Webhooks: Supports automation through lightweight, event-driven communication with other devices.Compatibility: Highly compatible with third-party home automation systems.No hub required: Ready to use both locally and remotely via Shelly Smart Control or third-party systems.Activity log: Stores a detailed history of events.KVS (Key-value storage): The KVS service provides basic storage for key-value pairs.Customizable thresholds and offsets for temperature, humidity, and light when used with the Plus Add-on.Protection against overcurrent, overvoltage, and overpower.Power measurement: Accurate monitoring of energy consumption. Information on voltage (V), current (A), and consumption (W) is displayed.Diverse driver integrations: Supports 0-10V and 1-10V drivers (such as lights, motors, valves, etc.).Night mode: Allows setting a specific brightness level for the lights during the night.Power-on brightness: If the night mode brightness is lower than the minimum power-on brightness, the minimum power-on brightness will be applied.Switch/button input mode: Provides flexible input control via switches and/or buttons.Single-button dim controlDual-button dim controlTransition duration: Determines the time for dimming from 0 to 100% when turning on and from 100 to 0% when turning off.Minimum power-on brightness: Brightness level (in percentage) applied when powered on and the current brightness is lower than the 'minimum power-on brightness'. Default is 3%. This is not applied when an explicit (custom) transition is defined in schedules and actions.Min/Max brightness: Limits the range of the dim signal for more accurate brightness control at the output.Button fade speed: Determines how quickly the output brightness changes when holding the button(s). Default is 3x.Button presets: State applied upon a double-click event. Default value is 100%.Virtual components: A special set of components that are not initially present in the device and are dynamically created by the user.Manual

An intelligent integrated dimmer for controlling LED, halogen lighting and supports different dimming techniques. The device is equipped with the automatic calibration function, active energy and current measurement and other functions known from the FIBARO module. Designed for quick installation in a flush-mounting box from 40 mm (depth). The Walli switch can also be used for manual activation of scenes.FeaturesControl the lighting remotely, via the switch and voice assistantsThe colour of the LED ring can be adjusted according to the user's wishesActively measures power and energy consumptionNotification in case of malfunction

The Z-Wave dimmer from Technisat is designed to control dimmable lights up to 0.87A. The dimmer has an auto-calibration mechanism and works with phase cut and phase on. The switch operates as a pulse switch and works stand-alone without any intelligent functions. The device has support for scene activation via the switch and energy measurement.FeaturesSwitch includes support for scene activationIntegrate and control classic motors via Z-Wave and the switch Maximum load capacity is 0.87A and connection to 230V Suitable for switch material series of Busch and Jaeger, GIRA ST 55 and MertenInformation on gear series:The Technisat flush-mounted units work with the following gear series:Busch & Jaeger: Busch-Duro 2000® SI, Busch-Duro 2000® SI Linear, Reflex SI, Reflex SI Linear, future® linear, solo®, carat®, Busch-axcent®, alpha, Busch-balance® SIGIRA: GIRA System 55Merten: System M

Glass touch switch for dimming lights. The switches can be integrated via Z-Wave with a gateway. The series is available in white and black and suitable for standard round flush-mounting boxes.FeaturesBuilt-in scene activationSupport for active energy measurementInput for external switchWorks with phase cut-off and phase-up".

Glass touch switch for dimming lights. The switches can be integrated via Z-Wave with a gateway. The series is available in white and black and suitable for standard round flush-mounting boxes.FeaturesBuilt-in scene activationSupport for active energy measurementInput for external switchWorks with phase cut-off and phase-up".

Vitrum DIN Dimmer is a Z-Wave Plus Dimmer for DIN-rail mounting. The dimmer works with the following dimming methods: phase cut and phase on. The product can be DIN-rail mounted and is equipped with buttons for local control.FeaturesZ-Wave Dimmer for lighting controlDIN-rail mountingMaximum load 200W LED

The Shelly Pro RGBWW PM is a five-channel smart LED controller for DIN rail mounting. Ideal for controlling RGB and white LED strips in various configurations. With five inputs (push button, switch, or analog signal) and five independently controllable outputs, this device is highly flexible for both residential and commercial applications. The Shelly Pro RGBWW PM supports four profiles: RGB + CCT (default) CCT x 2 RGB + lights x 2 Lights x 5 (independent control of 5 LED groups) In the Lights x 5 profile, five different LED strips or light groups can be controlled individually – ideal for zones or scenes. In addition, the device includes integrated power metering to monitor voltage, current, and energy usage per channel in real time. The Shelly Pro RGBWW PM works standalone in a local Wi-Fi network but is also fully compatible with cloud-based automation systems. Thanks to the built-in web interface, you can configure, operate, and monitor the device easily – locally or remotely over the internet. Features: DIN rail mounting 1DIN width – 19 mm Power metering per channel 5 independent light channels (for RGB, CCT, or white LED strips) 5 inputs (push button, switch, or analog 0–10V) Works without a gateway – standalone via Wi-Fi Built-in web interface (accessible via IP) Supports LAN (Ethernet), Wi-Fi, and Bluetooth Supports scripting (Shelly scripting) Supports MQTT, CoAP, REST API, and Webhooks Supports KNXnet/IP Works with Home Assistant, Homey Pro, Google Home, Alexa, and SmartThings Built-in Wi-Fi range extender & Bluetooth Gateway for Shelly devices Protected against overheating, overvoltage, and overcurrent Dimensions: 94 x 19 x 69 mm