Accessory for the Aeotec TriSensor, Aeotec MultiSensor 6 and Aeotec Multisensor 7. The mounting bracket makes it possible to place the sensor in a hollow wall or ceiling. The bracket can be rotated up to 30 degrees.
The Aeotec Recessed Door Sensor is a recessed magnetic contact sensor for mounting in doors and frames. The sensor has a diameter of 10mm and can be used for invisible mounting. The sensor works via Z-Wave and detects open/close. The device is supplied with a battery.FeaturesInvisible sensorZ-Wave 700Up to 2 years battery lifeMagnetic contact consisting of two elementsWorks wirelessly via Z-Wave
Aeotec MultiSensor 7 is a 6-in-1 Z-Wave sensor for detecting motion, temperature, light intensity, humidity, vibration and UV. The sensoris powered by 2x CR123A batteries or a Micro-USB. Optional: amounting bracket for wall mounting is available separately.FeaturesMultifunctional Z-Wave sensorMeasures temperature, humidity, light intensity and UVDetects motion and vibrationMotion detection up to 5mViewing angle of 120 degreesCompatible with popular Z-Wave controllers
The Aeotec Smart Switch 7 is the most compact Z-Wave wall plug for controlling devices up to 10A. The adapter measures energy consumption in real time and reports to the controller. In addition, it is protected against short circuiting and overload. The product is equipped with an LED indicator which can be used as an orientation light.FeaturesCompact intermediate plug (width 42mm)Maximum load capacity 10A (2300W at 230V)Support for energy measurementOverload and short-circuit protection
The Aeotec Siren 6 is a Z-Wave indoor siren with a 110dB acoustic signal and alarm light. The siren requires a fixed power supply and includes a backup battery (max. 4 hours). The product has 30 sounds and can be configured via the Z-Wave controller.
Optional: in addition to the Siren 6 the Aeotec Button can be connected to create a doorbell scenario.FeaturesZ-Wave indoor siren with acoustic and visual alarmCan be used as a doorbell with Aeotec ButtonWorks on a fixed power supply and has a built-in backup batteryMultiple sounds for different types of alerts
The Aeotec aërQ sensor is a compact Z-Wave sensor for monitoring temperature and humidity. The sensor has a 'mould' detection function that sends a signal based on the measured humidity and temperature. The signal is sent to a connected Z-Wave controller. In addition, the LED indicator shows the status of the environment. The sensor works with a button cell battery (included).FeaturesSensor for measuring humidity and temperatureBuilt-in fungus detection based on measured valuesOperates on one button cell batteryBattery life approximately 2 years (with factory settings)
Use the Aeotec Z-Stick to build your own smart home hub. The Z-Stick works with popular open-source home automation software such as Home Assistant and Domoticz. The Z-Stick works via a USB port with a Raspberry Pi, PC or Mac. Thanks to the built-in backup battery, you can easily add and remove devices to the controller.For the use of Z-Stick 7, 'bridge firmware' is a required function in the home automation software . The following software is recognized as compatible by the manufacturer: ZWaveJS (in Home Assistant)Indigo 7HomeSeer HS3/HS4For more information see: Aeotec.com< br>FeaturesBuild your own Z-Wave controller with the Z-stick Z-Wave 700 series with support for SmartStart and S2 securityWorks with Windows, Mac, Linux, RPi 4 and older versions< /li>Compatible with open-source home automation software
The Aeotec WallMote Quad is a stylish wireless Z-Wave wall switch for controlling 16 different devices or scenes. The switch has a rechargeable battery and comes with a mounting bracket for the wall. The switch has a haptic and acoustic feedback to confirm a command.FeaturesWireless switch with 4 buttonsFor controlling scenes or associationsHaptic and acoustic feedback when operating the switchRechargeable battery with micro-USB input
The Aeotec Range Extender 7 is a plug & play Z-Wave repeater for a Z-Wave network. The repeater strengthens and increases the coverage of the Z-Wave network. The Range Extender has been developed with the Z-Wave 700 series.
Due to its compact size, the Range Extender 7 does not block other power outlets. The product has a built-in range test function.
The Aeotec Door Window Sensor 7 is a Z-Wave magnetic contact sensor. The sensor detects open, closed and tilt (starting from an inclination of min. 5 degrees). The sensor has a potential-free contact for the connection of external devices. You can think of sensors, push buttons or a NTC contact.FeaturesDetects open, close and tiltBuilt-in tamper protectionBinary input for potential free sensorBattery powered
Aeotec TriSensor is a 3-in-1 Z-Wave sensor for detecting motion, temperature and light intensity.
The sensor operates on a CR123A battery.
Optional: a mounting bracket for wall mounting is available separately.Features3-in-1 Z-Wave sensorMeasures temperature and light intensityDetects movementMotion detection up to 7.5mCompatible with popular Z-Wave controllers
The Aeotec Door Window Sensor 7 is a Z-Wave 700 magnetic contact sensor. The sensor only detects open and closed. Thanks to the slim design, the Door Window Sensor 7 and the magnetic contact can be placed on any window. In addition, the Door Window Sensor 7 (700 series) has a unique core, which makes it easy to replace the circuit board without removing the sensor. Features Battery poweredZ-Wave 700 seriesDetects open and closedBuilt-in tamper protection
Use the Aeotec Z-Stick to build your own smart home hub. The Z-Stick works with popular open-source home automation software such as Home Assistant and Domoticz. The Z-Stick works via a USB port with a Raspberry Pi, PC or Mac. Thanks to the built-in back-up battery you can easily add and remove devices from the controller.FeaturesBuild your own Z-Wave controller with the Z-StickWorks with Windows, Mac, LinuxBuilt-in rechargeable lithium batteryCompatible with open-source home automation software
The Aeotec Water Sensor 7 Pro is a compact battery-powered Z-Wave 700 sensor for detecting flooding and measuring temperature and humidity. The leaks are detected via the wired water detector. The temperature and humidity can be used to monitor air quality. Features3-in-1 Z -Wave 700 sensorBattery-powered deviceSensor probe for detecting leaks in hard-to-reach placesSensor for measuring humidity and temperature
Bundle with the Aeotec Siren 6 and Aeotec Button for a complete doorbell system.Aeotec Siren 6The Aeotec Siren 6 is a Z-Wave indoor siren with a 110dB acoustic signal and alarm light. The siren requires a fixed power supply and includes a backup battery (max. 4 hours). The product has 30 sounds and can be configured via the Z-Wave controller.Optional: in addition to the siren, the Aeotec Button can be connected to create a doorbell solution.Aeotec ButtonCreate a complete doorbell system with the Aeotec Button. The Button activates the Aeotec Siren 6 via a 433MHz signal. The Button can also be added to the Aeotec Doorbell 6 as an extra bell push button, a total of three Buttons can be connected to one Siren 6/Doorbell 6.The device is battery-operated and comes with screws and double-sided adhesive tape for easy mounting. The maximum distance to a Siren 6/Doorbell 6 is 90 metres.Important: because the Siren 6/Doorbell 6 does not send a signal to the controller, the Aeotec Button cannot be used as a 'trigger' in scenes.FeaturesComplete bell system with Aeotec productsWorks as a stand-alone doorbell systemSimple mounting with supplied material (screws and double-sided adhesive tape)Aeotec Button is battery-powered, operates for approx. 2 yearsOperates up to 90 metres from a Doorbell 6 or Siren 6Wireless technology between Button and Siren 6 433MHzSiren 6 can be controlled via Z-Wave
Make energy consumption transparent with the Aeotec Home Energy Meter. The energy meter is installed at the fuse box and monitors the total energy consumption. Thanks to the intelligent terminals, the wattage and kilowatt hours are reported in real-time to the Z-Wave controller.
The main unit has a rear mounting and needs to be powered separately. The unit has three clamps and reports W and kWh (up to 60A)FeaturesIntelligent meter with 3 clampsSuitable for 13 phase meters up to 60AReal-time insight into watts and kilowatt hoursMeasuring range: 220V - 260V and 0 - 60AIP43 rating
The Aeotec Smart Switch 6 is a handy Z-Wave intermediate plug for operating devices up to 13A. The intermediate plug measures real-time energy consumption and reports to the Z-Wave controller. The LED ring changes color according to the amount of energy consumed by the connected device. The Smart Switch 6 is equipped with a built-in USB port with a capacity of 5A/1000mA . The USB port cannot be controlled via Z-Wave. The Aeotec Smart Switch 6 works with most Z-Wave hubs, including the FIBARO Home Centers, Homey Bridge, Homey Pro and Eneco Toon. Check out the Compatibility tab for more information.FeaturesSize plug: 58mm  ;Maximum load capacity 13A Actively measure the powerProtocol: Z-Wave
The Aeotec Range Extender 7 is a plug & play Z-Wave repeater for a Z-Wave network. The repeater strengthens and increases the coverage of the Z-Wave network. The Range Extender has been developed with the Z-Wave 700 series.
Due to its compact size, the Range Extender 7 does not block other power outlets. The product has a built-in range test function.
The Aeotec Heavy Duty Smart Switch is designed to wirelessly control and monitor high power devices (up to 40A). The switch can be controlled via the Z-Wave network. The Heavy Duty Smart Switch also measures energy consumption.FeaturesSecurely control electrical appliances via Z-WaveMonitor energy consumptionMaximum load capacity up to 40A
The Aeotec Nano Switch is a flush mount module for operating electrical appliances and lighting via Z-Wave. The module is designed to be placed in a flush-mounting box and can be connected to a wall switch.FeaturesOperate electrical appliances and lightingMaximum load capacity 10AWith energy measurementNeutral (blue) wire is required
Make energy consumption transparent with the Aeotec Home Energy Meter. The energy meter is installed at the fuse box and monitors the total energy consumption. Thanks to the intelligent terminals, the wattage and kilowatt hours are reported in real-time to the Z-Wave controller.
The main unit has a rear mounting and needs to be powered separately. The unit has one clamp and reports W and kWh (up to 60A)FeaturesIntelligent meter with one clamp.Suitable for 1 phase meter up to 60AReal-time insight into watts and kilowatt hoursMeasuring range: 220V - 260V and 0 - 60AIP43 rating
Use the Aeotec Z-Stick to build your own smart home hub. The Z-Stick works with popular open-source home automation software such as Home Assistant and Domoticz. The Z-Stick works via a USB port with a Raspberry Pi, PC or Mac. Thanks to the built-in back-up battery you can easily add and remove devices from the controller.FeaturesBuild your own Z-Wave controller with the Z-StickWorks with Windows, Mac, LinuxBuilt-in rechargeable lithium batteryCompatible with open-source home automation software
The Aeotec Water Sensor 7 is a compact battery-powered Z-Wave 700 sensor for detecting flooding and measuring temperature. The leaks are detected via the wired water detector. Features2-in-1 Z-Wave 700 sensor Battery-powered deviceSensor probe for detecting leaks in hard-to-reach placesSensor for measuring temperature