The Aqara Pet Feeder C1 is a smart automatic feeder with Zigbee 3.0. The device is designed to connect to your smart home, run feed schedules and integrate into automations. The Pet Feeder C1 has a remote schedule and manual feed control function via the Aqara Hubs. You can easily set the schedules and automations via the Aqara Home app. This allows the Pet Feeder C1 to be activated via sensors or controllers. The ability to automate with the Pet Feeder C1 makes the product really smart. Works locally The Pet Feeder C1 runs on a USB power supply (the power supply is not included as standard) and has an optional backup battery (LR20). Because the schedule function is performed locally, this ensures that the Pet Feeder C1 will always function, even if the hub or internet connection goes down. Statistics via Aqara Home app No type of food and pet is the same. Thanks to the handy statistics, the Pet Feeder C1 provides insight into the amount of food consumed per day. Via the Aqara Home app you can add the portion in grams, this way you have access to statistics and you can give exactly as much food as your pet needs. Feeder Tank The feed tank has a large capacity of 4L, which is suitable for small and medium-sized pets. A 4-litre food tank is suitable for both cats and dogs up to 15 kg and can hold approximately 1.7 kg of animal food. This is one month of food for a 4 kg cat*. The feed tank keeps the feed fresh and dry. Desiccant is supplied as standard with the Pet Feeder C1. In addition, the lid has an anti-spill construction, so that the food does not fall out of the tank when the device is tilted. All parts that come into contact with food are made of safe material. The stainless steel bowl, plastic tank and rubber dispenser wheel are all easy to remove and clean. Finally, the Pet Feeder C1 has a built-in microphone that can be used to record a message. The message is played when the feed is given. The microphone and message only work via the device and cannot be used via the Aqara hubs.Compatible with popular smart home ecosystems for voice control via the Aqara Hubs. Control via Siri, Alexa, Google, IFTTT works via Aqara Home scenes and automations. Features Zigbee 3.0 Repeater in the Zigbee network Works on a USB-A connection Optional backup battery (3 x LR20, not included as standard)  Automatic feeder with 4L tank Schedule function for feed works locally All-round compatibility with all popular voice assistants via the Aqara hubs *Based on data from petmd.com (50g daily)

The NICE Domi Climatic (WSR) is a stylish and wireless climate sensor for measuring the outdoor light intensity (LUX) and wind speed (m/s) and whether there is rain (on/off)This climate sensor is supplied with 230V. The sensor is splash-proof (IP55) and made of weather-resistant materials, so it can be hung outside on the facade of a building. The sensor part is adjustable relative to the mounting base, allowing mounting on sloping or overhanging surfaces. The Nice Domi Climatic uses the Nice BiDi protocol (on 433Mhz) and can therefore be linked to the Nice-FIBARO gateways with the Nice BiDi protocol. Measured values: Light intensity 0 - 83000 LUX Wind speed 10 – 120 km/hRain on/offPractical applications:By connecting this Nice Dome Climatic sensor to a Nice -FIBARO gateway creates several new and interesting usage options, such as: Outdoor light measurement, this can be used to determine whether it is dim/dark, followed by starting specific atmospheric scenes. Wind speed measurement, for closing skylights, retrieving drop-down awnings or sending interactive push messages to users.Rain,< /b> for closing skylights, retrieving drop-down awnings or sending interactive push messages to users.NOTE: The transmission range of the Nice BiDi protocol is more limited than Z-Wave. Place this climate sensor as close as possible to the Nice-FIBARO gateway and test the range before final installation.   Features • Stylish outdoor sensor • Wind speed and light intensity measurement • 230 Volt• Nice BiDi communication protocol • Can also be directly connected to Nice sun protection motors

The Smart Siren is a mains powered device with a siren and range extender in one. The smart home siren makes loud sounds to deter intruders from entering your home. With range extender functionality, the Smart Siren allows your smart home system to cover a larger area so you can add more devices. Due to the built-in backup battery, this siren will still sound when the power supply is disconnected.Do you want to know whether your Hub is compatible with Frient? Then click hereFeatures Zigbee 3.0Loose cable for power supplyIP20 Power supply 230v, 0.4 wattSiren 90dBm @ 1meterBack-up battery (not replaceable)Manual

The Jackery SolarVault 3 Pro Max AC is a modular AC-coupled home battery system designed for homes with existing solar panel installations. The system is particularly suitable for retrofit projects where installers want to add energy storage without modifying the existing PV cabling or inverters. Thanks to its AC-coupled architecture, the SolarVault 3 Pro Max AC works directly with existing string inverters and microinverters. This means the solar panels do not need to be rewired and the existing PV installation can remain unchanged. The battery system connects on the AC side of the installation and can be combined with a compatible P1 meter for dynamic energy management and self-consumption optimization. The system provides 2500W bidirectional AC power per unit. This allows the battery not only to store excess solar energy, but also to continuously supply power back to the home during periods of higher consumption. The bypass capacity up to 3680W ensures connected loads can remain powered directly without limiting grid power availability. The base unit includes 2.52 kWh storage capacity and can be expanded modularly up to 15.12 kWh per system using additional BP2500 battery modules. Multiple systems can also be connected in parallel for up to approximately 45 kWh total storage capacity, making the solution suitable for both smaller homes and larger residential projects. For installers, the SolarVault 3 Pro Max AC offers a relatively straightforward installation via existing AC circuits and P1 integration. This creates a flexible solution for households looking to maximize solar self-consumption, benefit from dynamic energy tariffs or prepare for future grid congestion and net metering reductions. The integrated LiFePO4 battery technology, multi-layer BMS protection, temperature monitoring and aerosol fire suppression provide a safe and long-lasting residential energy storage solution. Features: AC-coupled home battery for existing solar installations No modifications required to existing PV inverters or cabling Compatible with string inverters and microinverters 2500W bidirectional AC charge and discharge power per unit Bypass power up to 3680W Modular expansion from 2.52 kWh up to 15.12 kWh per system Parallel connection support up to approximately 45 kWh storage capacity LiFePO4 battery technology with long service life More than 6000 charge cycles Integrated Battery Management System with multi-layer protection Temperature monitoring and aerosol fire suppression Supports dynamic energy tariffs and energy optimization Realtime monitoring via Wi-Fi, Bluetooth and Ethernet Supports local monitoring and energy management IP65 enclosure for technical rooms or covered outdoor installations Operating temperature from -20°C to +55°C Plug & Play installation via AC connection and compatible P1 meter Note: A compatible energy meter or P1 meter is recommended for optimal operation and automatic energy management. Installation must be carried out in accordance with local regulations and applicable requirements for residential energy storage systems.

De Wanbo Projector Vali 1 is een draagbare smart projector met geïntegreerde 200° gimbal-stand voor flexibele plaatsing en projectie, inclusief plafondprojectie. Dit model combineert Full HD-resolutie met automatische beeldcorrectie voor snelle installatie. De Vali 1 beschikt over dual-band wifi en Bluetooth en heeft ingebouwde stereo speakers. Hierdoor is de projector geschikt voor entertainment-toepassingen in woon- en slaapruimtes en voor mobiele opstellingen. Belangrijkste kenmerken Display technologie: LCD Helderheid: 900 ANSI lumens Resolutie: 1920 x 1080 (Full HD) Lens: full glass coated lens with high transmission Zoomfunctie: 50%–100% Projectieverhouding: 1.35:1 Projectieformaat: 40–130 inch Projectieafstand: 1.2–3.9 m Keystone-correctie: auto Focus: auto Obstacle avoidance: auto Screen alignment: auto Speakers: 6W x2 Geluidsniveau: ≤28dB/m Bluetooth: 5.0 Wifi: dual band 2.4/5G Hz Aansluitingen: HDMI x1, USB x1, AUX 3.5 mm x1 Afmetingen: 254 x 188.8 x 227.6 mm Gewicht: 2.8 kg Verstelbare stand: 200° gimbal Besturingssysteem: Android TV 11

The Zigbee Range Extender repeats the signal within your Zigbee network and allows you to add more Zigbee devices to your smart home. This device is easy to install. All you have to do is plug it in and connect the device to your smart home hub. With the included backup battery, you never have to worry about dropped connections. Do you want to know if your Hub is compatible with frient? Then clickhereFeaturesZigbee 3.0Improve the coverage of your Zigbee mesh networkSize 46 x 119 x 23 mm IP20230V , 0.4WattCable for power supply connectionManual

De Wanbo Projector X5 Pro 2025 is een Full HD smart projector met hoge lichtopbrengst en automatische beeldoptimalisatie. Het model is ontworpen voor grotere beeldformaten en biedt automatische focus, keystone-correctie, schermuitlijning en obstakeldetectie (ASA 3.0). De projector ondersteunt HDR10 en online 4K-content (streaming) en is uitgerust met stereo speakers. Door de stille werking is dit model geschikt voor vaste opstellingen in woonruimtes. Belangrijkste kenmerken Helderheid: 1100 ANSI lumens Resolutie: 1920 x 1080 (Full HD) Zoomfunctie: 50%–100% Projectieverhouding: 1.25:1 Projectieformaat: 40–140 inch Projectieafstand: 1.1–3.9 m Keystone-correctie: auto Focus: auto Obstacle avoidance: auto Screen alignment: auto Speakers: 6W x2 Geluidsniveau: ≤26dB/m Bluetooth: 5.0 HDR10 ondersteuning: ja HDMI versie: HDMI 2.0 (upgraded interface) Afmetingen: 252 x 246 x 115 mm Besturingssysteem: Google TV (OS)

The NICE Domi Climatic (WS) is a stylish and wireless climate sensor for measuring outdoor light intensity (Lux) and wind speed (km/h). This climate sensor is powered by 230V. The sensor is splash-proof (IP55) and made of weather-resistant materials, making it suitable for mounting on an exterior wall. The sensing part is adjustable relative to the mounting base, allowing installation on sloped or overhanging surfaces. The Nice Domi Climatic uses the Nice BiDi protocol (at 433MHz) and can be connected to Nice-FIBARO gateways with the Nice BiDi protocol. Measured values: Light intensity: 0 - 83,000 Lux Wind speed: 10 – 120 km/h Practical applications: By connecting this Nice Domi Climatic sensor to a Nice-FIBARO gateway, various new and interesting use cases become available, such as: Outdoor light measurement: allows detection of dusk or darkness, triggering specific scenes. For example, closing blinds, awnings or starting lighting scenes. Wind speed measurement: for closing skylights, retracting awnings or sending interactive push notifications to users. Note: The transmission range of the Nice BiDi protocol is limited. Install this climate sensor as close as possible to the Nice-FIBARO gateway and test the range before final installation.   Features • Stylish outdoor sensor • Wind speed and light intensity measurement • 230V powered • Nice BiDi communication protocol • Can also be directly connected to Nice sunshade motors

The NICE Domi Climatic (WSC) is a stylish and wireless climate sensor for measuring light intensity (LUX), wind speed (m/s) and temperature (ºC). This climate sensor has its own solar cell that provides the required energy. This makes the installation location more flexible because no power wires need to be installed. The sensor is splash-proof (IP55) and made of weather-resistant materials, so it can be hung outside on the facade of a building. The sensor part is adjustable relative to the mounting base, allowing mounting on sloping or overhanging surfaces. The Nice Domi Climatic uses the Nice BiDi protocol (on 433Mhz) and can therefore be linked to the Nice-FIBARO gateways with the Nice BiDi protocol. Measured values: Light intensity 0 - 83000 LUX Wind speed 10 – 120 km/h Temperature -20 to 60 ºC Practical applications: By connecting this Nice Dome Climatic sensor to a Nice-FIBARO gateway, several new and interesting usage options are created, such as: Outdoor light measurement, this can be used to determine whether it is dim/dark, followed by starting specific atmospheric scenes. Wind speed measurement, for closing skylights, retrieving drop-down awnings or sending interactive push messages to users. Outside temperature measurement, in combination with the measured lux value, can be used to determine whether the awning can be lowered, if the wind is not too strong, of course, so that the inside temperature does not rises too high. NOTE: The transmission range of the Nice BiDi protocol is more limited than Z-Wave. Place this climate sensor as close as possible to the Nice-FIBARO gateway and test the range before final installation. Features • Stylish outdoor sensor • Wind speed, light intensity and temperature measurement • Autonomous energy supply by solar cell • Nice BiDi communication protocol • Can also be directly connected to Nice sun protection motors

The Ecowitt WS90 is a wireless 7-in-1 weather station for measuring local weather conditions. Its integrated sensors monitor wind speed and direction, rainfall, temperature, humidity, illuminance, UV index and barometric pressure. This provides current weather data for monitoring, alerts and weather-based automations. The ultrasonic wind sensor measures wind speed, gusts and direction without moving parts. The haptic rain sensor also operates without a traditional tipping bucket. This solid-state design reduces wear and maintenance and makes the weather station suitable for long-term outdoor installation. The WS90 features a ShellyX chip and therefore carries the Powered by Shelly label. Measurement data can be displayed in the Shelly Smart Control app through a compatible gateway. Adjustable sensor offsets allow readings to be adapted to the local installation environment. Pressure trends can be used to identify changes in the weather and alerts can be configured for conditions including rain, wind and UV radiation. Bluetooth and Zigbee operate simultaneously. The WS90 can therefore report data to multiple gateways and be combined with Shelly devices and compatible Zigbee systems. Use with Shelly Smart Control requires a Shelly BLU Gateway or a Shelly Plus, Pro, Gen3 or Gen4 device. Shelly sensors cannot be used as a gateway. The weather station is primarily powered by its integrated solar panel with two AA lithium batteries providing backup power. An optional 12V power adapter provides continuous power and activates the integrated ultrasonic wind sensor heater to melt snow and ice. The IPX5-rated housing is suitable for outdoor use and mounts on a pole with a diameter of 25mm. Features Wireless 7-in-1 weather station with ShellyX chip Powered by Shelly integration Measures wind speed, wind gusts and wind direction Haptic rainfall measurement without a tipping bucket Temperature and humidity measurements Illuminance, UV index and barometric pressure measurements Temperature range from -40 to 60°C Humidity measurement range from 1 to 99% RH Wind speed measurement range from 0 to 40m/s Rainfall measurement range from 0 to 9,999mm Illuminance measurement range from 0 to 200klx Barometric pressure range from 300 to 1,100hPa Ultrasonic and solid-state sensors without moving parts Simultaneous Zigbee and Bluetooth 5 LE communication Can report data to multiple gateways Displays measurement data in the Shelly Smart Control app Supports weather-based automations and alerts Adjustable sensor offsets for the local environment Integrated solar panel with AA lithium battery backup Optional 12V power supply for continuous power and sensor heating IPX5 rating for outdoor use Dimensions: 208 × Ø 93mm Weight: 459g without batteries Mounting on a pole with a diameter of 25mm Gateway required for use with Shelly Smart Control AA lithium batteries, gateway, mounting pole and 12V adapter not included

The Jackery SolarVault 3 Pro Max AC is a modular AC-coupled home battery system designed for homes with existing solar panel installations. The system is particularly suitable for retrofit projects where installers want to add energy storage without modifying the existing PV cabling or inverters. Thanks to its AC-coupled architecture, the SolarVault 3 Pro Max AC works directly with existing string inverters and microinverters. This means the solar panels do not need to be rewired and the existing PV installation can remain unchanged. The battery system connects on the AC side of the installation and can be combined with a compatible P1 meter for dynamic energy management and self-consumption optimization. The system provides 2500W bidirectional AC power per unit. This allows the battery not only to store excess solar energy, but also to continuously supply power back to the home during periods of higher consumption. The bypass capacity up to 3680W ensures connected loads can remain powered directly without limiting grid power availability. The base unit includes 2.52 kWh storage capacity and can be expanded modularly up to 15.12 kWh per system using additional BP2500 battery modules. Multiple systems can also be connected in parallel for up to approximately 45 kWh total storage capacity, making the solution suitable for both smaller homes and larger residential projects. For installers, the SolarVault 3 Pro Max AC offers a relatively straightforward installation via existing AC circuits and P1 integration. This creates a flexible solution for households looking to maximize solar self-consumption, benefit from dynamic energy tariffs or prepare for future grid congestion and net metering reductions. The integrated LiFePO4 battery technology, multi-layer BMS protection, temperature monitoring and aerosol fire suppression provide a safe and long-lasting residential energy storage solution. Features: AC-coupled home battery for existing solar installations No modifications required to existing PV inverters or cabling Compatible with string inverters and microinverters 2500W bidirectional AC charge and discharge power per unit Bypass power up to 3680W Modular expansion from 2.52 kWh up to 15.12 kWh per system Parallel connection support up to approximately 45 kWh storage capacity LiFePO4 battery technology with long service life More than 6000 charge cycles Integrated Battery Management System with multi-layer protection Temperature monitoring and aerosol fire suppression Supports dynamic energy tariffs and energy optimization Realtime monitoring via Wi-Fi, Bluetooth and Ethernet Supports local monitoring and energy management IP65 enclosure for technical rooms or covered outdoor installations Operating temperature from -20°C to +55°C Plug & Play installation via AC connection and compatible P1 meter Note: A compatible energy meter or P1 meter is recommended for optimal operation and automatic energy management. Installation must be carried out in accordance with local regulations and applicable requirements for residential energy storage systems.

The Jackery SolarVault 3 Pro Max AC is a modular AC-coupled home battery system designed for homes with existing solar panel installations. The system is particularly suitable for retrofit projects where installers want to add energy storage without modifying existing PV cabling or inverters. Thanks to its AC-coupled architecture, the SolarVault 3 Pro Max AC works directly with existing string inverters and microinverters. This means the solar panels do not need to be rewired and the existing PV installation remains intact. The home battery is connected on the AC side of the installation and can be combined with a compatible P1 meter for dynamic energy management and self-consumption optimization. The system provides 2500W bidirectional AC power per unit. This allows the battery not only to store excess solar energy, but also to continuously supply power back to the home during periods of higher energy demand. The bypass power of up to 3680W ensures connected loads can remain powered directly without limiting grid power availability. The base unit has a storage capacity of 2.52 kWh and can be expanded modularly up to 15.12 kWh per system with additional BP2500 battery modules. Multiple systems can also be connected in parallel for a total storage capacity of up to approximately 45 kWh, making the solution suitable for both smaller homes and larger residential installations. For installers, the SolarVault 3 Pro Max AC offers a relatively straightforward installation via existing AC circuits and P1 integration. This creates a flexible solution for households that want to use more of their own solar energy, apply dynamic energy tariffs or prepare for future grid congestion and changes to net metering. The SolarVault 3 Pro Max AC can also be integrated with various smart home platforms, including Homey. This allows installers to combine energy control with smart automations, dynamic energy tariffs and control based on energy consumption, solar production or presence. The integrated LiFePO4 battery technology, multi-layer BMS protection, temperature detection and aerosol fire suppression provide a safe and long-lasting energy storage solution for residential applications. Features: AC-coupled home battery for existing solar panel installations No modifications required to existing PV inverters or cabling Compatible with string inverters and microinverters 2500W bidirectional AC charge and discharge power per unit Bypass power up to 3680W Modular expansion from 2.52 kWh to 15.12 kWh per system Parallel connection possible up to approximately 45 kWh storage capacity LiFePO4 battery technology with long service life More than 6000 charge cycles Integrated Battery Management System with multi-layer protection Temperature detection and aerosol fire suppression Support for dynamic energy tariffs and energy optimization Realtime monitoring via Wi-Fi, Bluetooth and Ethernet Support for local monitoring and energy management Integration with Homey for smart energy automations IP65 enclosure for technical rooms or covered outdoor locations Operating temperature from -20°C to +55°C Plug & Play installation via AC connection and compatible P1 meter Note: For optimal operation and automatic energy control, a compatible energy meter or P1 meter is recommended. Installation must be carried out in accordance with local regulations and applicable requirements for energy storage systems.

De Wanbo Projector Cube 2 Pro is een compacte smart projector met Full HD-resolutie en ToF-gestuurde automatische beeldcorrectie. Dankzij het draaibare ontwerp is de projector flexibel te plaatsen en geschikt voor projectie op wand of plafond. De Cube 2 Pro is ontworpen voor snelle installatie: focus en keystone worden automatisch aangepast en de projectie is eenvoudig te schalen via zoom. Door de stille werking is dit model geschikt voor dagelijks gebruik in woon- en slaapruimtes. Belangrijkste kenmerken Display technologie: LCD Helderheid: 500 ANSI lumens Resolutie: 1920 x 1080 (Full HD) Zoomfunctie: 50%–100% Projectieverhouding: 1.2:1 Projectieformaat: 40–130 inch Projectieafstand: 1.2–3.5 m Keystone-correctie: ToF Focus: automatische focus (ToF) Projectiemodi: front / rear / front ceiling / rear ceiling Geïntegreerde speaker: 8W Geluidsniveau: ≤28B/m Aansluitingen: HDMI x1, USB x1, AUX 3.5 mm x1 Afmetingen: 113 x 111 x 212 mm Gewicht: 1.4 kg Verstelbare stand: 230° Besturingssysteem: Android TV 11 (ingebouwd)