The FIBARO Double Switch 2 is a flush mount module to switch two electrical devices on/off and measure their energy consumption. The flush mount module is one of the smallest in the world and can be used behind a wall socket or in a flush mounting box. The FIBARO Double Switch 2 has a maximum load of 2x 1500W. The module is also equipped with various protections such as protection against overheating and overload.FeaturesCan be used as a stand-alone switch without intelligent functionsControl two lamps or electrical circuits via Z-Wave and the switchWorks with different types of switchesActively measures energy consumptionA phase and neutral wire are required for installation

The FIBARO Single Switch 2 is a flush mount module to switch electrical devices on/off and measure energy consumption. The flush mount module is one of the smallest in the world and can be used behind a wall socket or in a flush mounting box. The FIBARO Single Switch 2 has a maximum load of 2500W. The module is also equipped with several safety features including protection against overheating and overload.FeaturesCan be used as a stand-alone switch without intelligent functionsControl two lamps or electrical circuits via Z-Wave and the switchWorks with different types of switchesActively measures energy consumptionA phase and neutral wire are required for installation

The FIBARO Roller Shutter 3 is designed for controlling electric roller shutters, curtain rails, blinds and other AC-powered devices. The module works with motors with mechanical and electronic end stops. The module can manually activate scenes or operate associations via a pulse switch. The Roller Shutter 3 measures active energy consumption and power.FeaturesSupport for opening, closing and tiltingPrecise positioning with different types of end adjustmentsCompact device allows mounting behind switchesWorks with different types of switches

The FIBARO RGBW Controller 2 is an universal module for controlling LED, RGB and RGBW LED strips and other 12-24V lighting. Control the intensity and colours of the lighting. The module can also read out various analogue sensors (0-10V) per input. The values can be used for the automation of the smart home system.FeaturesMeasures power and energy consumptionInputs to be used for analogue 0-10V sensors

The FIBARO Smart Modules are designed to control devices with potential-free contacts. The module can be controlled wirelessly via Z-Wave or the switch. The Smart Modules Switch can switch potential-free and DC. The modules are available as a single switch (FGS-214) and as a double switch (FGS-224).FeaturesControl any device via Z-Wave and the switchCan be used with different types of switchesDesigned for switching potential-free contactsThe Double Smart Module has a special parameter for switching entrance gates, garage doors and other motorised products.A phase and neutral wire are required for installation

The Nice Roll-Control has been developed for the control and precise positioning of AC-controlled motors, including roller shutters, blinds, awnings, screens and gates. The module supports motors with mechanical and electronic final adjustment. This product is intended for connection to FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The device can be operated and automated via the Z-Wave network. Features To be used with AC motors with electronic or mechanical final adjustment Measure the active energy consumption Works with various types of switches, including pulse switches and toggle switches Support motors with opening, closing and tilting

Heatit ZM Single Relay is a built-in relay for control of electrical devices up to 16A. The relay can be controlled via the Z-Wave network or a connected switch. The module has support for scene activation and a power measurement function. Heatit ZM Single Relay supports SmartStart and has a Z-Wave 700 series chip. The compact module has a thickness of 25 mm and fits into a flush-mounting box.FeaturesPowerful built-in relay 16A / 3600WZ-Wave 700SmartStartSupport for scene activationFirmware update (OTA)Power measurementSupports encryption modes S0, S2 Authenticated Class, S2 Unauthenticated Class

The Z-Wave dimmer from Technisat is designed to control dimmable lights up to 0.87A. The dimmer has an auto-calibration mechanism and works with phase cut and phase on. The switch operates as a pulse switch and works stand-alone without any intelligent functions. The device has support for scene activation via the switch and energy measurement.FeaturesSwitch includes support for scene activationIntegrate and control classic motors via Z-Wave and the switch Maximum load capacity is 0.87A and connection to 230V Suitable for switch material series of Busch and Jaeger, GIRA ST 55 and MertenInformation on gear series:The Technisat flush-mounted units work with the following gear series:Busch & Jaeger: Busch-Duro 2000® SI, Busch-Duro 2000® SI Linear, Reflex SI, Reflex SI Linear, future® linear, solo®, carat®, Busch-axcent®, alpha, Busch-balance® SIGIRA: GIRA System 55Merten: System M

The Nice RGBW-Control has been developed for the control of one-color LED strips, RGB(W) LED strips and other lighting that is controlled with 12/24V. With the module it is possible to control the light intensity and light color. This product is intended for connection to FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The device can be operated and automated via the Z-Wave network. Features The inputs can be used for 0-10V sensors Can be used as a dimmer with halogen lighting Measure the power and energy consumption All IN and OUT connections are configurable for LED control or 0-10V signal output.

The FIBARO Smart Modules are designed to control devices with potential-free contacts. The module can be controlled wirelessly via Z-Wave or the switch. The Smart Modules Switch can switch potential-free and DC. The modules are available as a single switch (FGS-214) and as a double switch (FGS-224).FeaturesControl any device via Z-Wave and the switchCan be used with different types of switchesDesigned for switching potential-free contactsThe Double Smart Module has a special parameter for switching entrance gates, garage doors and other motorised products.

The Aqara Single Switch T1 is a very compact flush mount switch module suitable for flush mounting boxes of (recommended) 55 mm. This version of the Aqara Single Switch T1 requires a (blue) neutral wire to operate and can be loaded between 3 and 2500 Watts (resistive load). This is the official European version with CE approval and meets the legal requirements.FeaturesSupports ZigBee 3.0.Power monitoring. Fits almost any wall box. Can be connected to your existing wall switch or outlet. Power off memory.Overheat and overload protection. Has timers and remote control. All-round compatibility with voice assistants: Apple Siri, Amazon Alexa, Google Assistant, and more are supported.Wireless frequency: 2.4GHz.

The FIBARO Walli Controller is a wireless Z-Wave (700) switch for activating scenes and controlling Z-Wave devices via associations. Thanks to the pre-sets the switch is easy to configure. Available pre-sets are Roller Shutter, Blinds Controller, Scene Controller, Dimmer, Switch, Double Switch. The Walli Controller operates on a lithium battery and/or a DC power supply. The device can be mounted on an installation box or glued to a smooth surface.FeaturesWireless Z-Wave 700 switchOnly suitable for FIBARO Walli coversSupports control of switches, dimmers and shuttersPower supply via battery (ER14250 included) or 5-24V DC (not included)Built-in temperature sensorWorks as Z-Wave repeater when connected to DC powerAverage battery life 2 years with standard settings and max. 10 push-buttons per day

The Z-Wave dimmer from Technisat is designed to control dimmable lights up to 0.87A. The dimmer has an auto-calibration mechanism and works with phase cut and phase on. The switch operates as a pulse switch and works stand-alone without any intelligent functions. The device has support for scene activation via the switch and energy measurement.FeaturesSwitch includes support for scene activationIntegrate and control classic motors via Z-Wave and the switch Maximum load capacity is 0.87A and connection to 230V Suitable for switch material series of Busch and Jaeger, GIRA ST 55 and MertenInformation on gear series:The Technisat flush-mounted units work with the following gear series:Busch & Jaeger: Busch-Duro 2000® SI, Busch-Duro 2000® SI Linear, Reflex SI, Reflex SI Linear, future® linear, solo®, carat®, Busch-axcent®, alpha, Busch-balance® SIGIRA: GIRA System 55Merten: System M

The Aqara Roller Shade Driver E1 is a retrofit roller blind controller. The device is easy to install and works with existing roller blinds via the beaded cord. The Roller Shade Driver must be mounted on the wall with 2 screws. The product has a built-in battery and can be charged via a USB Type-C cable. The device can also be continuously supplied with power via this input. This concerns the official European version with CE approval and meets the legal requirements. Features Accurately positionable with calibration method Stepless operationEasy installation for operating roller blinds via the bead cord4 adapters supplied as standard for different bead cordsTwo physical buttons for direct operation2-month battery lifeUSB Type-C for charging or constant power supplyAll-round compatibility with all popular ecosystemsVoice control via HomeKit, Alexa, Google Assistant and IFTTT

FIBARO Walli Button with light guide (LED ring) for use with separate cover frames with Walli Units.

The FIBARO Walli Controller is a wireless Z-Wave (700) switch for activating scenes and controlling Z-Wave devices via associations. Thanks to the pre-sets the switch is easy to configure. Available pre-sets are Roller Shutter, Blinds Controller, Scene Controller, Dimmer, Switch, Double Switch. The Walli Controller operates on a lithium battery and/or a DC power supply. The device can be mounted on an installation box or glued to a smooth surface.FeaturesWireless Z-Wave 700 switchOnly suitable for FIBARO Walli coversSupports control of switches, dimmers and shuttersPower supply via battery (ER14250 included) or 5-24V DC (not included)Built-in temperature sensorWorks as Z-Wave repeater when connected to DC powerAverage battery life 2 years with standard settings and max. 10 push-buttons per day

The Aqara Dual Relay Module T2 is an advanced Zigbee dual relay module to switch electrical devices, measure current and operate potential-free contacts. The module can control various types of devices, including garage doors, electric motors, water heaters, switches, lights and sockets. The T2 module supports two modes for switching contacts: regular (load) and potential-free (no load). Thanks to the two modes, the device can make traditional and electrical appliances intelligent. The Dual Relay Module T2 is compatible with popular smart home ecosystems through an Aqara Hub, including Apple Home, Alexa, Google Home and more. Flexible and versatile solution The Dual Relay Module T2 is versatile and can be used in a variety of ways. You can use the module to switch lights and sockets. The module can also be used to automate garage doors, tubular motors, boilers and heating valves. Heating based on heat demand The Aqara Radiator Thermostat E1 can be perfectly combined with the Dual Relay Module T2. The combination ensures that the heating is switched on the basis of the heat demand of one or more thermostats. This means that the heat source (for example a water heater/boiler/heating valve) is switched on the basis of the desired and measured temperature. Lock and motor control The Double Relay Module T2 is easy and safe to connect to AC motors. This allows the module to be used to operate the tubular motor and the roller shutter switch. Monitor energy and memory The dual relay module T2 has an on/off status memory function, which remembers the last status before the power failure. In addition, the module offers functions for measuring energy and reporting. Energy metering only works in regular (loaded) mode. Security features The module provides customizable values ​​for security features. The minimum and maximum overcurrent, overvoltage and power can be set here. When the values ​​are overwritten, the output is automatically switched off to ensure safety.Wireless switching mode Thanks to this function, the existing wall switch can be converted into a scene controller: arm or disarm the security system, control curtains or lights with your old wired switch.*** Installation on a DIN rail The design of the T2 is suitable for DIN rail mounting. This makes it easy to place the module in a control cabinet. The module is supplied with a DIN rail adapter as standard. To place the module in a flush-mounted box, a box of at least 60mm deep is required. The exact size of the module is: 45.5 × 48 × 24 mm. Maximum load capacityAC:100-250V, 50 /60Hz/Max.10A, Max 2500W (Incandescent Lamp); Max.1A, Max 250W(LED, CFL Fluorescent Lamp); Max 1A, Max 1/4 HP (Motor) M.1 DC: 24-30V: Max.10A, Max 300W (Resistive Load); 30-60V: Max.1A, Max 60W (Resistive Load); Attributes • Supports ZigBee 3.0 • Active energy metering in regular (loaded) mode • Overcurrent, overvoltage and overload protection. • Remember the on/off status in case of power failure • DIN rail mounting possible, adapter supplied as standard • Module can be powered with AC or DC • Can be used with different types of switches (pulse and toggle) • All-round compatibility with all popular ecosystems via Aqara hub

The Wall Plug Dimmer is an intermediate plug for dimming lighting. The plug remembers the last dim position when switched off. The range is a minimum of 6W to a maximum of 250W. The intermediate plug is also equipped with an overload protection.Please note: The Everspring Z-Wave Dimmer Mini Plug has a no input for a pin ground. FeaturesPlug type F (NL) (grounding)Maximum load capacity 250WPlug & play installation and physical button Compact design

FIBARO Walli Button with light guide (LED ring) for use with separate cover frames with Walli Units.

An intelligent integrated dimmer for controlling LED, halogen lighting and supports different dimming techniques. The device is equipped with the automatic calibration function, active energy and current measurement and other functions known from the FIBARO module. Designed for quick installation in a flush-mounting box from 40 mm (depth). The Walli switch can also be used for manual activation of scenes.Units are for the use of Walli in multiple cover frames or with other brands of switching material. When using Walli frames, the mounting frame, the frame and the button with light guide must be ordered. A mounting frame is always required when using other brand switching material, the button adapter is also required with GIRA and Legrand cover materials.FeaturesControl the lighting remotely, via the switch and voice assistantsThe colour of the LED ring can be adjusted to the wishes of the userActively measures current and energy consumptionNotification in case of malfunction

The Aqara Single Switch T1 is a very compact recessed switch module suitable for recessed boxes of (recommended) 55 mm. This version of the Aqara Single Switch T1 does not require a neutral wire to operate and can be loaded to 1,150W (5A resistive load). This is the official European version with CE approval and meets the legal requirements. FeaturesSupports ZigBee 3.0.No neutral wire required. Fits almost any wall box.Can be connected to your existing wall switch or outlet. 2-way switch support. Has overheat protection. Has timers and remote control.All-round compatibility with voice assistants: Apple Siri, Amazon Alexa, Google Assistant, and more are supported.Only suitable for non remote control lights. Wireless frequency: 2.4 GHz.

The Z-Wave switch from Technisat is designed to control electrical appliances and lighting up to 5A. The switch works like a pulse switch and operates stand-alone without intelligent functions. The device has support for scene activation via the switch and energy measurement.FeaturesSwitch includes support for scene activationIntegrate and control classic motors via Z-Wave and the switchMaximum load is 5A and connection to 230VSuitable for switch material series from Busch en Jaeger, GIRA ST 55 and MertenInformation on gear series:The Technisat flush-mounted units work with the following switch material series per brand:Busch & Jaeger: Busch-Duro 2000® SI, Busch-Duro 2000® SI Linear, Reflex SI, Reflex SI Linear, future® linear, solo®, carat®, Busch-axcent®, alpha, Busch-balance® SIGIRA: GIRA System 55Merten: System M

The Aeotec Smart Switch 7 is the most compact Z-Wave wall plug for controlling devices up to 10A. The adapter measures energy consumption in real time and reports to the controller. In addition, it is protected against short circuiting and overload. The product is equipped with an LED indicator which can be used as an orientation light.FeaturesCompact intermediate plug (width 42mm)Maximum load capacity 10A (2300W at 230V)Support for energy measurementOverload and short-circuit protection

The Aqara Wireless Mini Switch T1 can be used in automations by means of a single press, double press or hold. The switch has a replaceable CR2032 battery. The T1 version is the successor to the previous generation and has several improvements, including Zigbee 3.0 and OTA support. This is the official European version with CE approval and meets the legal requirements. Compatible with popular smart home ecosystems through the Aqara Hubs, including Matter, HomeKit, Alexa, Google Home, IFTTT and more. In addition, the sensor is also directly compatible with SmartThings via the Aeotec Smart Home Hub. Features Communication via Zigbee 3.0 Works on a battery (CR2032) Compatible with popular smart home ecosystems via the Aqara Hubs, including Matter, HomeKit, Google Home, Alexa, Homey Pro and more. Support for OTA updates Adopts V-0 class flame retardant PC panel that allows high temperatures. Tested up to 50,000 pressesHomey Pro: Compatible from version 1.8.2

An intelligent integrated switch to control 1 or 2 independent loads. Designed for quick installation in a flush-mounting box from 40 mm (depth). Equipped with a LED ring and functions known from the FIBARO modules. The Walli switch can also be used for manual activation of scenes.FeaturesControl lighting and electrical circuits via the Walli SwitchCan be used as a single and double switchActively measures current and energy consumptionColour of the LED ring can be adjusted according to the user's wishesNotifications in case of malfunctionsCan be operated via voice assistants

The Aeotec Nano Dimmer is a flush mount module for controlling and dimming lighting via Z-Wave. The module is designed to be placed in a flush-mounting box and can be connected to a wall switch. The Aeotec Nano Dimmer works with 2- and 3-wire installations. Optional: Aeotec Dimmer Bypass for low wattage lightingFeaturesControl dimmable lighting via Z-WaveMaximum load 1,2AWorks in 2- and 3-wire setupSupports energy measurement

The Shelly Qubino Wave 2PM module is a Z-Wave 800 built-in switch with two outputs. The module supports active energy metering and is designed to control devices such as lighting, fans, infrared panels, heaters and other electrical appliances. It is possible to control the module wirelessly via Z-Wave, as well as using a wall switch. The module can be powered with a voltage of 110-240V AC or 24DC, providing flexibility in the power supply. The maximum load capacity at AC is 16A and at DC it is 10A. The outputs of the Wave 2PM can switch 10A individually and 16A combined. In addition, the module is equipped with multiple protection functions, including protection against overheating, overvoltage and overcurrent.  Features Z-Wave 800 series Maximum load capacity at AC: 16A, at DC: 10A Protected against overheating Supports over-the-air firmware updates (OTA) Use with different types of switches

Intelligent flush-mounted module equipped with the functionalities of the FIBARO modules. Units are for use with Walli multiway frames or with other brands of switchgear. When using Walli frames, the mounting frame, the frame and the button with light guide must be ordered. A mounting frame is always required when using other brand switching material, the button adapter is also required with GIRA and Legrand cover material.FeaturesControl lighting and electrical circuits with the Walli SwitchCan be used as a single and double switchActively measures current and energy consumptionColour of the LED ring can be adjusted to the wishes of the userNotifications in case of malfunctionsCan be operated via voice assistants

Adapter for Walli Units with GIRA55 or Legrand cover frames and operating rockers.FeaturesControl lighting and electrical circuits with the Walli SwitchCan be used as single and double switchActively measures current and energy consumptionColour of the LED ring can be adjusted to the wishes of the userNotifications in case of malfunctionsCan be operated via voice assistants

An intelligent integrated roller shutter switch for controlling gates, blinds and scenes. Control multiple roller shutters with one click. Equipped with a LED ring and functions known from the FIBARO Roller Shutter 3 module. Designed for quick installation in a flush-mounting box from 40mm (depth). The Walli switch can also be used for manual activation of scenes.FeaturesOperate motorised curtains, blinds and shutters at the touch of a buttonControllable via a voice assistantThe colour of the LED ring can be adjusted to the user's preferenceActively measures power and energy consumption