The Heatit Actuator is an electrothermal actuator intended to open and close water-based heating systems. The actuator is normally closed and, in addition to being opened with a signal from a thermostat or actor, can also be operated manually. Features M30 x 1.5mm Voltage 230VStart current 300 mAPower 1WIP54 Stroke 5mm +/- 1m cable Normally closed

The FIBARO Heat Controller is the intelligent and stylish thermostat valve for temperature control of a radiator with a thermostat valve. The built-in temperature sensor automatically adjusts the temperature to the personal desired level. Thanks to the supplied adapters, the Heat Controller is easy to install without extra tools on an existing radiator with a thermostat valve. Via a smart home hub, you can easily create a comfortable and energy-saving weekly schedule for each room. In addition, the Heat Controller contains smart functionalities such as: open window detection, descale and freeze protection.The device has a built-in temperature sensor and can be connected to the separately available external temperature sensor for accurate temperature measurement. The FIBARO Heat Controller works with a rechargeable battery.FeaturesCommunication with the FIBARO Temperature Sensor via BLEVisual colour display temperature settingMaximum water temperature 90°CExternal temperature sensor can be connectedAuto calibration, freeze protection and decalcification functionOpen window function & operation protectionRechargeable battery and/or USB power supply*External temperature measurement**No external USB power supply includedFor double-sided temperature measurement the external Heat Controller is required

This is the Heat Controller Starterpack including external temperature sensor.The FIBARO Heat Controller is the intelligent and stylish thermostat for temperature control of a radiator with a thermostat valve. The built-in temperature sensor automatically adjusts the temperature to the personal desired level. Thanks to the supplied adapters, the Heat Controller is easy to install without extra tools on an existing radiator with a thermostat valve. Via a smart home hub, you can easily create a comfortable and energy-saving weekly schedule for each room. In addition, the Heat Controller contains smart functionalities such as: open window detection, descale and freeze protection.The device has a built-in temperature sensor and can be connected to the separately available external temperature sensor for accurate temperature measurement. The FIBARO Heat Controller works with a rechargeable battery.FeaturesCommunication with the FIBARO Temperature Sensor via BLEVisual colour display temperature settingMaximum water temperature 90°CExternal temperature sensor can be connectedAuto calibration, freeze protection and decalcification functionOpen window function & operation protectionRechargeable battery and/or USB power supply*External temperature measurement**No external USB power supply includedFor double-sided temperature measurement the external Heat Controller is required

The Heatit Z-Temp3 is a battery-powered thermostat specifically designed for controlling water-based heating systems. In combination with the Heatit Z-Water2 you can control your heating system via the Z-Wave® network or with the buttons on the control panel. The thermostat has a user-friendly interface.The Heatit Z-Temp3 has 3 settings: Heating, Cooling and Eco.The thermostat fits into System 55 frames and can be mounted next to other devices such as dimmers or light switches. The Heatit Z-Temp3 can also be mounted directly on the wall or placed freely.The Heatit Z-Temp3 can be set as a main thermostat. This means that you can set the desired temperature and mode on one device, after which it will automatically forward the settings to other connected units.All communication between the Heatit Z-Temp3 and the controlled device are completely wireless.The Heatit Z-Temp3 runs on 2x AAA batteries, but can also be connected to an external power source. For this purpose the Heatit Transformer 230VAC (45 126 48) is recommended.The Heatit Z-Temp3 can be connected to the Heatit ZM Single Relay, other Z-Wave relays , the Heatit ZM Thermostat, the Heatit Z-TRM6 Thermostat and other Z-Wave devices to control different types of heating solutions.The Heatit Z-Temp3 is an excellent choice for renovation or restoration projects of existing buildings, as it is easy to install without cabling. We recommend using multiple 230VAC devices to create a mesh network.FeaturesDisplay shows measured and set temperatureHas 3 settings: Heating, Cooling and Eco.Battery-powered thermostat for wireless control of Z- Wave relayBuilt-in temperature and humidity sensorIdeal for controlling individual heating zones with Z-WaterAvailable in 2 colorsInternal temperature sensor Proximity sensor for automatic on/off display

The Heatit Z-Water2 is a Z-Wave control unit for operating water-based heating systems. With this control unit, the electrical on/off valve controllers (actuators) on heating distributors can be controlled within a Z-Wave network. The Z-Water2 is equipped with nine (9) potential-free switching contacts. These switching relays can be operated per output via the Z-Wave controller or linked via Z-Wave association to Heatit and other Z-Wave thermostats. In addition, the Z-Water2 has two inputs to which external NTC sensors can be connected for local temperature measurements. Due to the DIN rail mounting, the Z-Water2 can be easily and professionally mounted near the mix manifold. Potential free contacts The potential-free switching relays of the Z-Water2 can switch a maximum of 5 Amps per output. This allows the common open/close valve controllers (actuators) that are offered on the heat installation market to be connected. Both 24VDC (via external power supply) and 230VAC actuators can be used. Thermostat connection The control of the Z-Water2 relay outputs can be done from climate panels of the Z-Wave controller used. It is also possible to connect thermostats from Heatit (such as TRM3, TRM6 and Z-Temp2) and other Z-Wave manufacturers via Z-Wave associations. This means that the linked thermostat directly controls the relay output on the Z-Water2. 'Valve exercise' In the warmer period, the valve controllers (actuators) will be used less often or may not be used at all. To prevent limescale build-up from blocking the valve after a long period of time, the Z-Water2 has a 'valve exercise' option. This special function will open and close the connected actuator at least once every 30 days for a preset time (parameter). This prevents problems in the heating system. As you would expect from a Heatit product, the latest Z-Wave functions are supported. This means that the Z-Water2 is already prepared for the future. Additional accessories will be available later, such as an external Z-Wave antenna and a separate Heatit 24VDC DIN-rail power supply. Attributes • Z-Wave communication • Compact enclosure with DIN rail mounting • Nine (9) Potential-free relays, individually controllable from controller • Two (2) analog NTC (10kΩ) inputs for external temperature sensors • Connection with Z-Wave thermostat possible (via associations) • Connector for external antenna (optional, not yet available) • Prepared for Z-Wave Security and SmartStart support (Z-Wave 3.0)

The Technisat Heating Thermostat 3 is a battery-powered thermostatic valve with illuminated LED display and built-in temperature sensor. The thermostatic valve works on the basis of Z-Wave and supports FLiRS. This makes the device respond immediately to a Z-Wave command.  The Heating Thermostat 3 has support for open-window detection, anti-freeze protection and anti-limescale protection. In addition, the thermostatic valve is supplied with adapters for various valves and is compatible with M30 x 1.5mm, RAV, RAL and RAVL. Features Built-in temperature sensor Works on 2x AA battery LED screen with backlight Automatic open window detection Built-in protection against freezing and anti-limescale

The Heatit Z-TRM6 is a Z-Wave thermostat for operating electric underfloor heating. The thermostat is equipped with a built-in temperature sensor and has two inputs for external temperature sensors. The thermostat can be operated via a Z-Wave controller or the physical buttons on the front. The thermostat supports active energy metering and various types of protections. The maximum load capacity of the thermostat is 16A. You can also manually set the current measurement, for example if the thermostat is connected to an external relay. The TRM6 is equipped with the following protections: overheating, overload and short circuit in the sensor. The cover frames of the Z-TRM6 are made on the basis of the 55x55 frame standard and tested on the GIRA ST55, Elko and Schneider Exact. The installation depth of the module is 23.5 mm. Different modes The Heatit Z-TRM6 can be used in three functional ways: heating, cooling and eco. Each chosen mode will control the internal relay, only the logic will react differently to the sensor data. With the Eco Mode, the thermostat can be (temporarily) set to a lower set point, for example during the holiday or summer period. You can activate this via the physical thermostat or a scene via the gateway. Master thermostat The Heatit Z-TRM6 can be set as a MASTER thermostat. Setpoints cannot be sent to the FIBARO Heat Controller or Heatit Z-Temp2, but the Z-TRM6 can send temperature settings to other thermostats (via associations), including the Heatit ZM Thermostat. Waterborne heating In combination with the Z-Water (and other Z-Wave switches), the TRM6 can be used for water-based underfloor heating. In addition, the Heatit Z-TRM6 supports a 'Power Regulator Mode'. This Power Regulator Mode switches the internal relay on and off every X time to heat or cool the room, without using a temperature sensor. For example, the Z-TRM6 switches the internal relay on and then off every 30 minutes. Features Display shows measured temperature Buttons for manual operation Mounted in flush-mounted box, works on 230V connection Temperature measurement: internal and external wired sensors (floor or room) Fits in GIRA ST55 frames Available in 2 colors Active energy metering Temperature control: Hysteresis or PWM Relay status icon Adjustable display brightness Lock Mode/Child Lock Open Window Detection ZeroX detection (zero crossing switching).

The Heatit Z-Temp3 is a battery-powered thermostat specifically designed for controlling water-based heating systems. In combination with the Heatit Z-Water2 you can control your heating system via the Z-Wave® network or with the buttons on the control panel. The thermostat has a user-friendly interface.The Heatit Z-Temp3 has 3 settings: Heating, Cooling and Eco.The thermostat fits into System 55 frames and can be mounted next to other devices such as dimmers or light switches. The Heatit Z-Temp3 can also be mounted directly on the wall or placed freely.The Heatit Z-Temp3 can be set as a main thermostat. This means that you can set the desired temperature and mode on one device, after which it will automatically forward the settings to other connected units.All communication between the Heatit Z-Temp3 and the controlled device are completely wireless.The Heatit Z-Temp3 runs on 2x AAA batteries, but can also be connected to an external power source. For this purpose the Heatit Transformer 230VAC (45 126 48) is recommended.The Heatit Z-Temp3 can be connected to the Heatit ZM Single Relay, other Z-Wave relays , the Heatit ZM Thermostat, the Heatit Z-TRM6 Thermostat and other Z-Wave devices to control different types of heating solutions.The Heatit Z-Temp3 is an excellent choice for renovation or restoration projects of existing buildings, as it is easy to install without cabling. We recommend using multiple 230VAC devices to create a mesh network.FeaturesDisplay shows measured and set temperatureHas 3 settings: Heating, Cooling and Eco.Battery-powered thermostat for wireless control of Z- Wave relayBuilt-in temperature and humidity sensorIdeal for controlling individual heating zones with Z-WaterAvailable in 2 colorsInternal temperature sensor Proximity sensor for automatic on/off display

External temperature sensor only suitable for direct connection to FIBARO Heat Controller

The Heatit Z-TRM6 is a Z-Wave thermostat for operating electric underfloor heating. The thermostat is equipped with a built-in temperature sensor and has two inputs for external temperature sensors. The thermostat can be operated via a Z-Wave controller or the physical buttons on the front. The thermostat supports active energy metering and various types of protections. The maximum load capacity of the thermostat is 16A. You can also manually set the current measurement, for example if the thermostat is connected to an external relay. The TRM6 is equipped with the following protections: overheating, overload and short circuit in the sensor. The cover frames of the Z-TRM6 are made on the basis of the 55x55 frame standard and tested on the GIRA ST55, Elko and Schneider Exact. The installation depth of the module is 23.5 mm. Different modes The Heatit Z-TRM6 can be used in three functional ways: heating, cooling and eco. Each chosen mode will control the internal relay, only the logic will react differently to the sensor data. With the Eco Mode, the thermostat can be (temporarily) set to a lower set point, for example during the holiday or summer period. You can activate this via the physical thermostat or a scene via the gateway. Master thermostat The Heatit Z-TRM6 can be set as a MASTER thermostat. Setpoints cannot be sent to the FIBARO Heat Controller or Heatit Z-Temp2, but the Z-TRM6 can send temperature settings to other thermostats (via associations), including the Heatit ZM Thermostat. Waterborne heating In combination with the Z-Water (and other Z-Wave switches), the TRM6 can be used for water-based underfloor heating. In addition, the Heatit Z-TRM6 supports a 'Power Regulator Mode'. This Power Regulator Mode switches the internal relay on and off every X time to heat or cool the room, without using a temperature sensor. For example, the Z-TRM6 switches the internal relay on and then off every 30 minutes. Features Display shows measured temperature Buttons for manual operation Mounted in flush-mounted box, works on 230V connection Temperature measurement: internal and external wired sensors (floor or room) Fits in GIRA ST55 frames Available in 2 colors Active energy metering Temperature control: Hysteresis or PWM Relay status icon Adjustable display brightness Lock Mode/Child Lock Open Window Detection ZeroX detection (zero crossing switching).

The Heatit Z-TRM6 is a Z-Wave thermostat for operating electric underfloor heating. The thermostat is equipped with a built-in temperature sensor and has two inputs for external temperature sensors. The thermostat can be operated via a Z-Wave controller or the physical buttons on the front. The thermostat supports active energy metering and various types of protections. The maximum load capacity of the thermostat is 16A. You can also manually set the current measurement, for example if the thermostat is connected to an external relay. The TRM6 is equipped with the following protections: overheating, overload and short circuit in the sensor. The cover frames of the Z-TRM6 are made on the basis of the 55x55 frame standard and tested on the GIRA ST55, Elko and Schneider Exact. The installation depth of the module is 23.5 mm. Different modes The Heatit Z-TRM6 can be used in three functional ways: heating, cooling and eco. Each chosen mode will control the internal relay, only the logic will react differently to the sensor data. With the Eco Mode, the thermostat can be (temporarily) set to a lower set point, for example during the holiday or summer period. You can activate this via the physical thermostat or a scene via the gateway. Master thermostat The Heatit Z-TRM6 can be set as a MASTER thermostat. Setpoints cannot be sent to the FIBARO Heat Controller or Heatit Z-Temp2, but the Z-TRM6 can send temperature settings to other thermostats (via associations), including the Heatit ZM Thermostat. Waterborne heating In combination with the Z-Water (and other Z-Wave switches), the TRM6 can be used for water-based underfloor heating. In addition, the Heatit Z-TRM6 supports a 'Power Regulator Mode'. This Power Regulator Mode switches the internal relay on and off every X time to heat or cool the room, without using a temperature sensor. For example, the Z-TRM6 switches the internal relay on and then off every 30 minutes. Features Display shows measured temperature Buttons for manual operation Mounted in flush-mounted box, works on 230V connection Temperature measurement: internal and external wired sensors (floor or room) Fits in GIRA ST55 frames Available in 2 colors Active energy metering Temperature control: Hysteresis or PWM Relay status icon Adjustable display brightness Lock Mode/Child Lock Open Window Detection ZeroX detection (zero crossing switching).

The MH7 thermostat is available in two versions - one for water-controlled heating and one for electric heating. Both versions have a display, touch buttons and report the status to the Z-Wave controller. In addition to temperature, the device alsomeasures humidity.FeaturesPower supply via 230V ACTempered glass display with touch buttonsRelay: MH7-EH - 16A and MH7-WH - 5ABoth thermostats are available in white and black

The Nice Heat-Control is a smart radiator thermostat knob with a built-in temperature sensor. The heat level is automatically controlled by the set schedules. Thanks to an innovative room analysis algorithm, the Heat-Control calculates the time it takes to reach the desired temperature based on room volume. Heat-Control can be adjusted manually at any time via the app and voice command. The Heat-Control has a built-in temperature sensor and can be connected to the separately available external temperature sensor. This product is intended for connection to FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The device can be operated and automated via the Z-Wave network. Features Suitable for thermostatic valves: M30 x 1.5, Danfoss RTD-N and Danfoss RA-N Easy to install without tools Built-in battery and rechargeable via standard micro-USB port* Visual LED ring for temperature display Frost protection and descaling function *No external USB power supply and cable included *No external temperature sensor included

The MH7 thermostat is available in two versions - one for water-controlled heating and one for electric heating. Both versions have a display, touch buttons and report the status to the Z-Wave controller. In addition to temperature, the device also measures humidity.FeaturesPower supply via 230V ACTempered glass display with touch buttonsRelay: MH7-EH - 16A and MH7-WH - 5ABoth thermostats are available in white and black

The MH7 thermostat is available in two versions - one for water-controlled heating and one for electric heating. Both versions have a display, touch buttons and report the status to the Z-Wave controller. In addition to temperature, the device alsomeasures humidity.FeaturesPower supply via 230V ACTempered glass display with touch buttonsRelay: MH7-EH - 16A and MH7-WH - 5ABoth thermostats are available in white and black

MH3901-Z is a Z-Wave boiler thermostat, the device measures the indoor temperature and displays the temperature setting of the device. The thermostat has a NO/NC contact for controlling a potential-free contact. The thermostat can be operated via the Z-Wave network and via the touch buttons.FeaturesTempered glass displayBuilt-in relayAC or DC power supply (9-24V)

The Heatit Actuator 24Vis an electrothermal actuator intended to open and close water-based heating systems. The actuator is normally closed and, in addition to being opened with a signal from a thermostat or actor, can also be operated manually. Features M30 x 1.5mm Voltage 24v DC (direct voltage) Start current 470mA Power 1WIP54 Stroke 5mm +/- 1m cable Normally closed

The MCO Home MH-F500 is a Z-Wave thermostat for controlling up to 3-stage heating and 2-stage cooling systems.The thermostat is controllable via Z-Wave or stand-alone. Operation of the thermostat is via the tempered glass touch display. The thermostat has convenient connection inputs for simplified installation. Important: The thermostat can be provided locally with schedule (7-day) with different profiles. This setting is not copied to the Z-Wave controller, if the thermostat is linked to a controller, the schedules can be set here. FeaturesThermostat for control of regular AC or heat pump systems;4.3 "LCM display with touch screenSimple connections for wiring, no screwdriver requiredWorks via Z-Wave and stand-alone 

The MCO Home MH-3928 is a Z-Wave thermostat that can operate a maximum of 3 traps in 2-traps coel systems. The thermostaat is operated via Z-Wave of stand-alone (geen schema’s). Control of the thermostaat can be done via the touch button. The thermostaat heeft handige aansluit ingangen voor het vereenvoudigen van de installation. Identify Thermostaat for operation of regulate AC or warm pomp systems; 2.8 ”TFT display with touch button Schroef aansluitingen voor bedrading Works via Z-Wave

The Nice Clima-Control is the ideal solution for efficient and intuitive control of your air conditioning and heating system. This versatile device combines advanced technology with a user-friendly interface, allowing you to effortlessly adjust the temperature in your home to your preferences. With the built-in infrared transmitter, you can easily control existing air conditioning units. Using the available app, you can teach the Clima-Control the correct infrared codes. The Nice Clima-Control connects to your smart home via Z-Wave 800 and can both heat and cool. For heating, it can control a Z-Wave relay via association. With the built-in battery and included bracket, the Nice Clima-Control can be placed anywhere. Features Compatible with Nice Yubii smart home Infrared control of air conditioning devices Heat / Cool mode Z-Wave 800 Rechargeable battery USB-C 5V 2A

The Heatit Z-TRM6 is a Z-Wave thermostat for operating electric underfloor heating. The thermostat is equipped with a built-in temperature sensor and has two inputs for external temperature sensors. The thermostat can be operated via a Z-Wave controller or the physical buttons on the front. The thermostat supports active energy metering and various types of protections. The maximum load capacity of the thermostat is 16A. You can also manually set the current measurement, for example if the thermostat is connected to an external relay. The TRM6 is equipped with the following protections: overheating, overload and short circuit in the sensor. The cover frames of the Z-TRM6 are made on the basis of the 55x55 frame standard and tested on the GIRA ST55, Elko and Schneider Exact. The installation depth of the module is 23.5 mm. Different modes The Heatit Z-TRM6 can be used in three functional ways: heating, cooling and eco. Each chosen mode will control the internal relay, only the logic will react differently to the sensor data. With the Eco Mode, the thermostat can be (temporarily) set to a lower set point, for example during the holiday or summer period. You can activate this via the physical thermostat or a scene via the gateway. Master thermostat The Heatit Z-TRM6 can be set as a MASTER thermostat. Setpoints cannot be sent to the FIBARO Heat Controller or Heatit Z-Temp2, but the Z-TRM6 can send temperature settings to other thermostats (via associations), including the Heatit ZM Thermostat. Waterborne heating In combination with the Z-Water (and other Z-Wave switches), the TRM6 can be used for water-based underfloor heating. In addition, the Heatit Z-TRM6 supports a 'Power Regulator Mode'. This Power Regulator Mode switches the internal relay on and off every X time to heat or cool the room, without using a temperature sensor. For example, the Z-TRM6 switches the internal relay on and then off every 30 minutes. Features Display shows measured temperature Buttons for manual operation Mounted in flush-mounted box, works on 230V connection Temperature measurement: internal and external wired sensors (floor or room) Fits in GIRA ST55 frames Available in 2 colors Active energy metering Temperature control: Hysteresis or PWM Relay status icon Adjustable display brightness Lock Mode/Child Lock Open Window Detection ZeroX detection (zero crossing switching).

The MH8 thermostat is designed to control ventilation convectors. The thermostat measures the room temperature, displays the time and can control the fan speed based on the temperature. The thermostat has a display for displaying the measured and set information. The product also has touch buttons to operate the thermostat and can be controlled via Z-Wave.FeaturesCentral operation of 2-pipe systemsAvailable in white and blackMade of tempered glassFits into a square flush box (British Standard)

The Heatit DIN Smart Thermostat is an electronic DIN rail thermostat designed for electric heating. It can be controlled via Z-Wave® (with a gateway), Modbus RS-485, or manually using the front buttons. With its clear display and versatile connection options, it offers a user-friendly and professional solution for both residential and industrial applications. Features DIN rail mounting for easy installation in distribution or control panels. Supports Z-Wave® and Modbus RS-485 for flexible integration in smart home or building automation systems. Three modes: Heat, Cool and Eco for precise temperature control across various applications. Connections for two external temperature sensors (room and floor sensors, wired). Active power metering for real-time insight into energy consumption and improved efficiency. ZeroX™ technology ensures the relay switches at 0V, significantly extending its lifespan. Supports hysteresis and PWM regulation for stable temperature management. Open window detection automatically switches off heating to prevent energy loss. Built-in overload and overheat protection for safe operation. Compatible with OTA firmware updates and SmartStart setup. Supports external antenna (optional) for improved signal strength. Technical specifications Power supply: 230VAC / 50Hz Max load: 16A / 3600W (resistive load) For loads above 13A, a contactor is recommended Control methods: Hysteresis or PWM Communication: Z-Wave® (S2 security, SmartStart) / Modbus RS-485 Operating temperature: 0–50 °C Mounting: DIN rail (1 module width) Protection class: IP20 (for installation inside distribution box)

The MH8 thermostat is designed to control ventilation convectors. The thermostat measures the room temperature, displays the time and can control the fan speed based on the temperature. The thermostat has a display for displaying the measured and set information. The product also has touch buttons to operate the thermostat and can be controlled via Z-Wave.FeaturesCentral control of 4-pipe systemsAvailable in white and blackMade of tempered glassFits into a square flush box (British Standard)

The Heatit WiFi6 thermostat has been developed for controlling electric underfloor heating. The thermostat is equipped with WiFi and has an LCD screen with capacitive buttons. The temperature can be measured with the built-in temperature sensor, floor sensor or external sensor. The thermostat can be configured via the display or the app, you can use the Heatit WiFi app for this and works with Android & iOS. In addition, the thermostat can be operated with Amazon Alexa and Google Home.The thermostat can be used stand-alone or in a group with multiple Heatit WiFi thermostats. In addition, the device fits in the most common system 55 frames, for example from GIRA.The Heatit WiFi6 has 3 modes; Heat - Cool and Eco. Features Wi-Fi/BLE thermostat Internal room temperature sensor External room temperature sensor (wired) Floor sensor Power regulator Temperature limiter 3 modes: Heating - Cooling and Eco Hysteresis/PWM Temperature calibration Open window detection ZeroX detectionRelay status iconAdjustable display brightness Single pole switch (maximum 16A)Lock mode/childproof lock Google Home, Amazon Alexa and open API (in development) Weekly schedule in the app Profiles: Home - Away - Night - Vacation Active current measurement Firmware update (OTA)

The Nice Heat-Control Kit contains the smart radiator thermostat knob and external temperature sensor. The external temperature sensor serves as a reference point for the Heat-Control. The heat level is automatically controlled by the set schedules. Thanks to an innovative room analysis algorithm, the Heat-Control calculates the time it takes to reach the desired temperature based on room volume. Heat-Control can be adjusted manually, via the app and voice command at any time. This product is intended for connection to FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The device can be operated and automated via the Z-Wave network. Features Suitable for thermostatic valves: M30 x 1.5, Danfoss RTD-N and Danfoss RA-N Easy to install without tools Built-in battery and rechargeable via standard micro-USB port* Visual LED ring for temperature display Frost protection and descaling function *No external USB power supply and cable included

The Aqara Thermostat Valve W600 is a smart radiator valve designed to provide efficient energy use and optimal comfort. By working with Aqara presence and climate sensors, the W600 can regulate each room independently, automatically turning off the heating in unoccupied spaces while maintaining warmth where it’s needed. With personalized schedules and precise temperature control within 0.5 °C, the W600 ensures a comfortable environment whenever you need it. The thermostat supports both Thread and Zigbee and is compatible with Matter, allowing integration with Apple Home, Home Assistant and other platforms. The W600 offers flexible control via app, voice or manual operation, and can also work with the Aqara Climate Sensor W100 for direct temperature control. Features such as a rotatable LED display, quiet operation below 30 dB and built-in frost protection make the W600 reliable and convenient for everyday use. Features Spatial intelligence for energy savings – automatically turns off heating in unoccupied rooms Supports Thread and Zigbee with Matter integration for broad compatibility Precise temperature control in 0.5 °C increments with calibration function Supports Aqara Climate Sensor W100 for external temperature reading Battery life up to 2 years under normal use Flexible control via app, voice, manual operation or connected Aqara sensors Group control for multiple radiators in the same room Rotatable LED display (180°) for easy reading from any angle Quiet operation (< 30 dB) for undisturbed sleep Built-in frost protection to safeguard the heating system Compatible with Apple Home, Home Assistant and other Matter platforms Disclaimers Zigbee mode via the Aqara Home app is required for some functionalities. Geofencing 2.0 may not be available at launch and will be added via an app update. To use with a Matter ecosystem, a Matter Controller and a Thread Border Router of that ecosystem are required. An Aqara Zigbee Hub is required for Zigbee mode. Works only directly with the built-in sensor* FP300; TVOC linking is not supported. Battery life up to 2 years under typical use: approximately 8 months of active operation per year in Thread mode; actual lifespan may vary depending on usage frequency. In Zigbee mode, the lowest trigger temperature can be adjusted.

The Nice Fan4-Control offers smart and precise control of your air-based heating system with 2 valves for heating and cooling, ensuring optimal comfort in your home. This innovative device combines ease of use with advanced technology for efficient heating regulation. With convenient features such as control via Yubii Home and programmable schedules, you have full control over your heating and cooling, no matter where you are. The Fan4-Control integrates seamlessly into any smart home and provides flexibility for your specific needs. Connection to your smart home is via Z-Wave. Features Smart control: Easily set the desired temperature via the screen. Energy efficient: Save energy with smart heating schedules and automatic optimization. Compatible with Yubii Home Z-Wave Heat / Cool mode Fan speed (4 levels, 3 speeds) Compatible with smart home: Support for various platforms.

MCO Home IR2900 is a Z-Wave 800 thermostat for operating a split air conditioner. The thermostat can receive a Z-Wave command and convert it to an infrared command. The IR2900 can serve different brands and models with the built-in cloud infrared database. The thermostat can be configured via Bluetooth with an iOS or Android device. The thermostat has a display for displaying the room temperature and touch buttons for adjusting the temperature. The IR2900 can be powered in two ways, via the built-in battery or via a USB Type-C connection. With the fixed power option, the battery can be used as a backup. There are four applications for the MCO Home IR2900 Heating and cooling with IR control, with this application the IR2900 is associated with an on/off module for the heating source and split air conditioner. Heating and cooling via association group control. IR2900 thermostat works as wireless Z-Wave thermostat. Infrared is not used Infrared control for heating, on/off control for cooling (via association) Infrared control for cooling, on/off control for heating source (via association) Apps iOS - https://apps.apple.com/no/app/ir -thermostat/id1582146430?l=nb Android - https://play.google.com/store/apps/details ?id=com.mcohome.codingctrl Features Z-Wave 800 Battery powered and/or 5V USB Type-CBattery works approximately 2 - 3 months (1500mAh) Average full charge time: 4 hours Temperature range: 0°C to 55°C Installation works via the Android or iOS application Distance mounting holes: 60.3mm

The MH7 thermostat is available in two versions - one for water-controlled heating and one for electric heating. Both versions have a display, touch buttons and report the status to the Z-Wave controller. In addition to temperature, the device also measures humidity.FeaturesPower supply via 230V ACTempered glass display with touch buttonsRelay: MH7-EH - 16A and MH7-WH - 5ABoth thermostats are available in white and black