The FIBARO Dimmer 2 is a universal wireless dimmer module with energy consumption measurement. Applicable in 2- and 3-wire installations. The Dimmer 2 supports different types of lighting and dimming techniques. This is automatically detected by an intelligent algorithm. The Dimmer 2 also works stand-alone behind an existing switch. The module can be used in combination with a pulse switch for manual activation of scenes.FeaturesCan be used as stand-alone dimmer without intelligent functionsCan be used in 2-wire and 3-wire installationsAutomatic calibration based on type of lightingWorks with trailing edge and leading edge
Complementary product for the FIBARO Dimmer 2. The installation of the Bypass enables lighting with minimum energy consumption. Bypass is a device designed to work with FIBARO Dimmer 2 (FGD-212), to be used with LED bulbs or energy saving compact fluorescent lamps. FIBARO Bypass 2 prevents LEDs from flickering and turned off compact fluorescent lamps from glowing. In 2-wire connection FIBARO Bypass 2 reduces the minimum power of load required by the Dimmer for correct operation. FGB-002 provides powering of the Dimmer 2 in case of controlling low loads.
The FIBARO Double Switch 2 is a flush mount module to switch two electrical devices on/off and measure their energy consumption. The flush mount module is one of the smallest in the world and can be used behind a wall socket or in a flush mounting box. The FIBARO Double Switch 2 has a maximum load of 2x 1500W. The module is also equipped with various protections such as protection against overheating and overload.FeaturesCan be used as a stand-alone switch without intelligent functionsControl two lamps or electrical circuits via Z-Wave and the switchWorks with different types of switchesActively measures energy consumptionA phase and neutral wire are required for installation
The FIBARO Single Switch 2 is a flush mount module to switch electrical devices on/off and measure energy consumption. The flush mount module is one of the smallest in the world and can be used behind a wall socket or in a flush mounting box. The FIBARO Single Switch 2 has a maximum load of 2500W. The module is also equipped with several safety features including protection against overheating and overload.FeaturesCan be used as a stand-alone switch without intelligent functionsControl two lamps or electrical circuits via Z-Wave and the switchWorks with different types of switchesActively measures energy consumptionA phase and neutral wire are required for installation
The FIBARO Wall Plug is an intelligent compact plug & play intermediate plug. Designed for remote switching on and off of connected devices (up to 2.5 kW) and measuring active power consumption. Thanks to the LED ring, the current energy consumption is easy to read. The LED ring can also used for testing the Z-Wave range. The Wall Plug is available in the following variants type F (NL), type E (BE/FR). The FIBARO Wall Plug Type F works with most Z-Wave hubs, including the FIBARO Home Centers, Homey Bridge, Homey Pro and Eneco Toon. See the Compatibility tab for more information.FeaturesEnergy consumption visible through the LED ring and the Z-Wave controller Control any connected device wirelessly via Z-WaveBuilt-in Z-Wave range tester Overload protectionLED ring can be used as night and orientation lamp
The FIBARO Motion Sensor is an advanced compact multi-sensor. The eye-shaped design makes the Motion Sensor easy to mount on any surface. The Motion Sensor has a built-in motion sensor, temperature sensor, light sensor and accelerometer. Upon detection of motion or an alarm, the eye will display a visual colour or temperature as defined by the user. To prevent false alarms, the sensitivity can be adjusted to your personal preference. The sensor is fully wireless and battery operated.A mounting bracket for mounting in hollow wall or ceiling is available separately.FeaturesTemperature, alarm and motion detection are displayed via the LED indicatorDetects motion, measures temperature and light intensityUse the Motion Sensor for making the environment saferMeasures temperature in every roomBattery-powered multisensorTampering protectionAdjustable sensitivity level
DIN-rail adapters for safe and professional installation of the FIBARO modules. This is the DIN-rail adapter with S1 and S2 buttons.Advantages of the S1 and S2 buttonsThe S1 and S2 buttons enable control via the DIN railVia the S1 button the module can be added/deleted from the Z-Wave networkEasy identification of the modules thanks to colours and labels
The Smoke Sensor is a compact modern optical smoke detector with temperature sensor. can be detected. The sensor is battery powered, includes a built-in siren and LED indicator. The unique blackbox history system logs data for incident tracking.The FIBARO Smoke Sensor works with most Z-Wave hubs, including the FIBARO Home Centers, Homey Bridge, Homey Pro and Eneco Toon. See the Compatibility tab for more information.FeaturesBattery powered smoke detector3 levels of sensitivity in accordance with EN 14604:2005Protection against open rear Equipped with a self-test functionBuilt-in Z-Wave range test and black box function to register smoke and temperature li>Acoustic signal with RGB LED indicator
The Nice Roll-Control has been developed for the control and precise positioning of AC-controlled motors, including roller shutters, blinds, awnings, screens and gates. The module supports motors with mechanical and electronic final adjustment.
This product is intended for connection to FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The device can be operated and automated via the Z-Wave network.
Features
To be used with AC motors with electronic or mechanical final adjustment
Measure the active energy consumption
Works with various types of switches, including pulse switches and toggle switches
Support motors with opening, closing and tilting
FIBARO Home Center 3 is the most powerful and advanced smart home hub for monitoring, configuring and controlling the FIBARO system. The Home Center 3 communicates wirelessly via Z-Wave and the local area network (LAN) with other compatible devices. The HC3 includes an advanced recovery and backup system with watchdog function. Automate homes with block scenes, LUA scripts, Quick Apps, panels and profiles.Advanced software combined with high quality components guarantee stability and performance. Thanks to Z-Wave 500 the HC3 has an exceptional number of integrations with hundreds of smart devices from other manufacturers. The solutions with the Home Center 3 are endless.FeaturesUser-friendly and fast interfaceSupport for block and LUA scenesWorks as stand-alone controller, master or slave controllerRemote management via web interface and mobile appsAdvanced recovery and backup system (triple data security)Monitor and control the home with the Home Center AppBuilt-in panels for configuration of Alarm, Climate, Garden and ProfilesCompatible with voice assistants (Google Assistant, Amazon Alexa and Siri shortcuts)Compatible with cloud services like IFTTT, Facebook Messenger and FIBARO Installer AppIntegrate Z-Wave devices and other smart IoT devices via the built-in pluginsMost powerful gateway on the market with 4 x 1.2 GHz processor and 2 GB RAM memory
The FIBARO Home Center 3 Lite is the smaller basic version of the most advanced smart home system (Home Center 3). The device is designed on the software used in the Home Center 3. With the HC3L you can manage and automate other Z-Wave devices to control lighting, heating, blinds, climate and alarm solutions. The Home Center 3 Lite is recommended for small installations in apartments and houses (up to 100m2).Suitable for:Up to 40 Z-Wave devices (recommended)1 IP camera40 scenes10 Quick Apps5 PluginsFeaturesWireless communication via Z-Wave 700 technologyEfficient hardware architectureDesigned for small installations in flats and houses up to 100m2Easy and fast installationAdvanced automation via block scenes, LUA, panels and profilesHighest level of data securityCompatible with voice assistants (Google Assistant, Amazon Alexa and Siri shortcuts) Compatible with cloud services like IFTTT, Facebook Messenger and FIBARO Installer AppIntegrate Z-Wave devices and other smart IoT devices via built-in pluginsAdvanced backup and recovery system
The FIBARO RGBW Controller 2 is an universal module for controlling LED, RGB and RGBW LED strips and other 12-24V lighting. Control the intensity and colours of the lighting. The module can also read out various analogue sensors (0-10V) per input. The values can be used for the automation of the smart home system.FeaturesMeasures power and energy consumptionInputs to be used for analogue 0-10V sensors
The Heatit battery-operated thermostat is designed to control water-controlled underfloor heating. The Z-Temp2 can be associated with a Z-Wave relay to control the heating solution. The thermostat has a built-in temperature, humidity and proximity sensor.FeaturesSurface mount thermostat for wall or surface mountingDisplay shows measured and set temperatureBattery-powered thermostat for wireless control of Z-Wave relaysBuilt-in temperature and humidity sensorIdeal for controlling individual heating zones with Z-WaterAvailable in 2 coloursInternal temperature sensorProximity sensor for automatic on/off switching of display
The FIBARO Smart Modules are designed to control devices with potential-free contacts. The module can be controlled wirelessly via Z-Wave or the switch. The Smart Modules Switch can switch potential-free and DC. The modules are available as a single switch (FGS-214) and as a double switch (FGS-224).FeaturesControl any device via Z-Wave and the switchCan be used with different types of switchesDesigned for switching potential-free contactsThe Double Smart Module has a special parameter for switching entrance gates, garage doors and other motorised products.A phase and neutral wire are required for installation
The FIBARO Roller Shutter 3 is designed for controlling electric roller shutters, curtain rails, blinds and other AC-powered devices. The module works with motors with mechanical and electronic end stops. The module can manually activate scenes or operate associations via a pulse switch. The Roller Shutter 3 measures active energy consumption and power.FeaturesSupport for opening, closing and tiltingPrecise positioning with different types of end adjustmentsCompact device allows mounting behind switchesWorks with different types of switches
The FIBARO Door/Window Sensor 2 is a wireless magnetic contact sensor. Open doors and windows are detected by separating the two components. The status of the sensor can be used as a trigger for a scene, or to check if the window is open. The Door/Window Sensor 2 is also equipped with a built-in temperature sensor and tamper protection. The FIBARO Door/Window Sensor is battery operated and completely wireless.FeaturesEasy plug & play installation on any surfaceDetection of open windows and doors by separating magnetic componentsBuilt-in tamper protectionBuilt-in LED indicator for device statusMounting material includedLow energy consumption
The Smart Implant is a universal sensor and double relay to control potential-free and 24V DC circuits. The universal module makes it possible to include any device into the Z-Wave network. The contact on the inputs can be copied to the outputs. In addition, the outputs can also be controlled separately. The device supports analogue sensors, binary sensors, DS18B20 temperature sensors and a DHT22 humidity sensor.FeaturesWorks as a Z-Wave repeaterUniversal sensor with two outputs for controlling potential-free contactsBuilt-in temperature sensor
Heatit ZM Single Relay is a built-in relay for control of electrical devices up to 16A. The relay can be controlled via the Z-Wave network or a connected switch. The module has support for scene activation and a power measurement function. Heatit ZM Single Relay supports SmartStart and has a Z-Wave 700 series chip. The compact module has a thickness of 25 mm and fits into a flush-mounting box.FeaturesPowerful built-in relay 16A / 3600WZ-Wave 700SmartStartSupport for scene activationFirmware update (OTA)Power measurementSupports encryption modes S0, S2 Authenticated Class, S2 Unauthenticated Class
Heatit ZM Thermostat is a built-in thermostat with Z-Wave for controlling electric underfloor heating. The maximum load capacity of the module is 16A. The module can be connected with a wired NTC sensor for measuring the temperature, the sensor is supplied as standard. The module also has support for active energy measurement and different types of protection.Equipped with protections against: overheating, overload and short circuit in the sensor.
Features
Z-Wave 700
Built-in thermostat
Application: electric heating
Maximum load capacity 16A (3600W)
Support for active energy metering and protections
NTC 10 kΩ sensor (supplied as standard)
Support for SmartStart, Firmware update (OTA), S2 security
The Aqara Motion Sensor P1 is a battery-powered ZigBee sensor for detecting movement and measuring light intensity. When detecting movement or changing the ambient light, the sensor will report to the ZigBee hub. The Motion Sensor has a detection arc of 170° for a maximum of 2 meters and 150° for a maximum of 7 meters. In addition, thanks to the versatile 360-degree position, the sensor can be placed anywhere. The Motion Sensor P1 has a configurable detection timeout (1 to 200 seconds) and adjustable sensitivity. The compact sensor has a battery life of 5 years. This can be achieved by turning off the LED indication and a detection timeout of longer than 30 sec.Compatible with popular smart home ecosystems via the Aqara Hubs, including HomeKit, Alexa, IFTTT, and more. Matter support will be available via an OTA update via the Aqara Hubs.
Features
Zigbee 3.0
Battery powered (CR2450 supplied as standard)
Motion sensor
Light sensor
Configurable timeout detection
Extra wide field of view
Adjustable sensitivity
All-round compatibility with all popular ecosystems
The FIBARO Wall Plug is an intelligent compact plug & play wall plug. It is designed to remotely switch on and off connected devices (up to 2.5 kW) and to measure the active power consumption. Thanks to the LED ring, the current energy consumption is easy to read. The Wall Plug is available in the following versions: type F (NL), type E (BE/FR).FeaturesEnergy consumption visible through the LED ring and the Z-Wave controllerOperate any connected device wirelessly via Z-WaveBuilt-in Z-Wave range testerOverload protectionLED ring can be used as night- and orientation lamp
The Z-Wave dimmer from Technisat is designed to control dimmable lights up to 0.87A. The dimmer has an auto-calibration mechanism and works with phase cut and phase on. The switch operates as a pulse switch and works stand-alone without any intelligent functions. The device has support for scene activation via the switch and energy measurement.FeaturesSwitch includes support for scene activationIntegrate and control classic motors via Z-Wave and the switch
Maximum load capacity is 0.87A and connection to 230V
Suitable for switch material series of Busch and Jaeger, GIRA ST 55 and MertenInformation on gear series:The Technisat flush-mounted units work with the following gear series:Busch & Jaeger: Busch-Duro 2000® SI, Busch-Duro 2000® SI Linear, Reflex SI, Reflex SI Linear, future® linear, solo®, carat®, Busch-axcent®, alpha, Busch-balance® SIGIRA: GIRA System 55Merten: System M