Shelly Wave Shutter LR

Control electric motors for roller shutters, blinds, garages and gates. Controlled by precise positioning and support for energy measurement.

€38.00*

*Price is excluding VAT

Product number: QLSH-001P10EU

Manufacturer: Shelly Wave

EAN: 3800238073145

Product information "Shelly Wave Shutter LR"

The Shelly Wave Shutter LR is a Z-Wave 800 in-wall module for controlling and accurately positioning motorized shading systems. The module is designed for applications such as roller shutters, blinds, screens, curtains and awnings with a 230V AC motor. Thanks to support for both traditional Z-Wave mesh and Z-Wave Long Range, the module is suitable for installations where extended wireless range is required.

The module supports precise positioning and allows connected shading systems to be automated and controlled remotely via a Z-Wave controller. In addition, the Wave Shutter LR features integrated power metering, providing insight into the energy consumption of the connected motor. For proper operation, it is recommended to use motors with electronic or mechanical limit switches.

The module can be powered with 110-240V AC or 24V DC and includes several protection mechanisms, including overheating, overvoltage and overcurrent protection. In addition, the module supports SmartStart for quick installation and secure communication via Z-Wave S2.

Features

Z-Wave 800 series with support for mesh and Long Range
Suitable for roller shutters, blinds, screens, curtains and awnings
Precise positioning control for motorized shading systems
Integrated power metering
Power supply: 110-240V AC or 24V DC
SmartStart for quick and easy installation
S2 Security (Authenticated/Unauthenticated)
Protected against overheating, overvoltage and overcurrent
Supports over-the-air firmware updates (OTA)
Can be used with different types of switches
Supports scenes and automations within Z-Wave systems

Please note: for proper operation, it is recommended to use motors with electronic or mechanical limit switches only.

Properties

Actors:	Roller shutter and curtain control
Battery included:	Yes
Built-in box:	Ø = 50mm, depth ≥ 60mm
Communicatie & Protocol:	Z-Wave
In accordance with guidelines:	RED 2014/53/EU RoHS 2011/65/EU
Installation method:	Flush mount
Maximum load capacity:	10A
Operating humidity:	10-95% relative humidity without condensation
Operating temperature:	0–35°C
Power source:	110-240V AC, 50/60Hz
Protocol:	Z-Wave
Radio frequency:	868.0–868.6MHz 869.7–870.0MHz
Range:	outdoor up to 50m indoors up to 40m (Depending on terrain and building construction)
Transmit power:	+6 dBm

Downloads "Shelly Wave Shutter LR"

Download Wave_Shutter_user_guide_multilang_print_V3

Shelly Wave Pro Dimmer 1PM

The Shelly Wave Pro Dimmer 1PM is a DIN-rail-mounted dimmer. The module supports active energy measurement and is designed to dim a single light source. The Wave Pro Dimmer 1PM can be operated with 2 switches. The smart dimmer works with Z-Wave, using a Z-Wave 800 chipset, and is compatible with Homey, Home Center 3, and other platforms such as Home Assistant and SmartThings. You can easily install the dimmer in your fuse box on a DIN rail, allowing you to dim one light source with a maximum of 200 watts. Note! The dimmer does not yet have full support on the mentioned platforms. Check the current compatibility via the manual link below. Based on our own tests on the HC3, it seems possible to add the unit after several attempts, resulting in a usable endpoint. Note that the unit needs to be added in Singlechannel mode (see associations) and corrected. Supported Light Sources Incandescent bulbs Dimmable LED and CFL Dimmable electronic transformers Features 110-240VAC Z-Wave 800 chipset S2 security Maximum 200 watts (1 channel) 2 switch contacts Trailing edge Power measurement Overload protection Overheat protection Surge protection Fuse box installation, DIN rail 19mm width Manual

Product number: QPDM-0A1P01EU

€78.00*

Shelly Qubino Wave 1

The Shelly Qubino Wave 1 module is a Z-Wave 800 built-in switch with one potential-free output. The module is designed to control devices such as electric locks, garage doors, entrance gates, irrigation systems, electrical outlets and lighting. With a maximum load capacity of 16A, the module offers sufficient power for various applications. It is possible to control the module wirelessly via Z-Wave, as well as using a wall switch. The module can be powered with a voltage of 110-240V AC, 24-48V DC or 12V DC, providing flexibility in power supply. In addition, the output is potential-free, which means that the input voltage can differ from the device you want to switch. This allows compatibility with various electrical devices. In addition, the module is equipped with protection against overheating. Features Z-Wave 800 series Switch with potential-free output Maximum load capacity: 16A Protected against overheating Supports over-the-air firmware updates (OTA) Use with different types of switches

Product number: QNSW-001X16EU

€34.00*

Shelly Qubino Wave 1 Mini

The Shelly Qubino Wave 1 mini module is a Z-Wave 800 built-in switch with one dry or potential-free contact and one switch. The module is designed to control devices such as gates, garage doors and other electrical appliances. It is possible to control the module wirelessly via Z-Wave, as well as using a single wall switch. The module can be powered with a voltage of 110-240V AC. The potential-free contact has a maximum load capacity at 230v of 8A or 5A at 30V DC.Features Z-Wave 800 series Potential free switchMaximum load capacity at 230V AC - 8A / 30V DC 5ASupports over-the-air firmware updates (OTA) Can be used with different types of switches S2 security and SmartStart suitable Format 29x35x16 mm Wire 0.5 to 1.5 mm²

Product number: QMSW-0A1X8EU

€31.00*

Shelly Qubino Wave 1PM Mini

The Shelly Qubino Wave 1PM Mini module is a Z-Wave 800 built-in switch with one output and one switch. The module supports active energy metering and is designed to control devices such as lighting, sockets, heaters and other electrical appliances. It is possible to control the module wirelessly via Z-Wave, as well as using a single wall switch. The module can be powered with a voltage of 110-240V AC. The maximum load capacity is 8A. In addition, the module is equipped with multiple protection functions, including protection against overheating, overvoltage and overcurrent. Features Z-Wave 800 series Maximum load capacity at 8A Protected against overheating Supports over-the-air firmware updates (OTA) Can be used with different types of switchesS2 security and SmartStart suitableFormat 29x35x16 mmWire 0.5 to 1.5 mm²

Product number: QMSW-0A1P8EU

€33.00*

Shelly Qubino Wave 2PM

The Shelly Qubino Wave 2PM module is a Z-Wave 800 built-in switch with two outputs. The module supports active energy metering and is designed to control devices such as lighting, fans, infrared panels, heaters and other electrical appliances. It is possible to control the module wirelessly via Z-Wave, as well as using a wall switch. The module can be powered with a voltage of 110-240V AC or 24DC, providing flexibility in the power supply. The maximum load capacity at AC is 16A and at DC it is 10A. The outputs of the Wave 2PM can switch 10A individually and 16A combined. In addition, the module is equipped with multiple protection functions, including protection against overheating, overvoltage and overcurrent. Features Z-Wave 800 series Maximum load capacity at AC: 16A, at DC: 10A Protected against overheating Supports over-the-air firmware updates (OTA) Use with different types of switches

Product number: QNSW-002P16EU

€38.00*

Shelly Qubino Wave i4DC

This Shelly Qubino Wave i4DC is a Z-Wave 800 module suitable for 4 switching contacts and is powered by 5-24v DC (direct voltage). The module sends Central Scene commands and/or associations when one of the buttons is used in the following way (see manual for more explanation) :Press 1x briefly Press 2x briefly Press once and hold Letting go Features Z-Wave 800 5-24V DCRecessed, behind (wall) switch(es) Works with switch, pulse switch, hotel switch Switch connection 4xManual

Product number: QNSN-0D24XEU

€31.00*

Shelly Qubino Wave PM Mini

The Shelly Qubino Wave PM mini module is a Z-Wave 800 built-in module for current measurement. The module is designed for current measurement of devices such as lighting, sockets, heaters and other electrical appliances. The module can be powered with a voltage of 110-240V AC. The maximum load capacity is 16A. Features Z-Wave 800 series Maximum load capacity 16A Supports over-the-air firmware updates (OTA) S2 security and SmartStart suitableFormat 29x35x16 mmWire 0.5 to 1.5 mm²

Product number: QMEM-0A1PC16EU

€30.00*

Shelly Qubino Wave Pro 1

The Shelly Qubino Wave Pro 1 is a Dinrail mountable Z-Wave 800 actor. The module is designed to operate 1 device such as lighting, fans, infrared panels, heaters and other electrical appliances. It is possible to operate the module wirelessly via Z-Wave, as well as using a (wall) switch. The maximum load capacity is 16A. Supported load types Resistive (Ohms) – Incandescent, halogen, heaters Capacitive – Electronic equipment with capacitors Inductive (with RC Snubber) – LED lighting, LED drivers, air conditioning and fans Attention! The switch-on peak of inductive loads such as LED lighting damages the relays. Use the RC Snubber to absorb this switch-on peak. Features Z-Wave 800 110-240VAC Output 1x16ASwitch connection 2x Protected against overload Protected against overheating Protected against voltage peaks Built-in distribution box, DIN-RailManual

Product number: QPSW-0A1X16EU

€63.00*

Shelly Qubino Wave Pro 1PM

The Shelly Qubino Wave Pro 1PM is a Dinrail mountable Z-Wave 800 actor. The module supports active energy measurement and is designed to control 1 device such as lighting, fans, infrared panels, heaters and other electrical appliances. It is possible to operate the module wirelessly via Z-Wave, as well as using a (wall) switch. The maximum load capacity is 16A. Supported load types Resistive (Ohms) – Incandescent, halogen, heaters Capacitive – Electronic equipment with capacitors Inductive (with RC Snubber) – LED lighting, LED drivers, air conditioning and fans Caution! The switch-on peak of inductive loads such as LED lighting damages the relays. Use the RC Snubber to absorb this switch-on peak. Features Z-Wave 800 110-240VAC Output 1x16ASwitch connection 2xCurrent measurement Protected against overload Protected against overheating Protected against voltage peaks Built-in distribution box, DIN rail Manual

Product number: QPSW-0A1P16EU

€78.00*

Shelly Qubino Wave Pro 2

The Shelly Qubino Wave Pro 2 is a Dinrail mountable Z-Wave 800 actor. The module is designed to control 2 devices such as lighting, fans, infrared panels, heaters and other electrical appliances. It is possible to operate the module wirelessly via Z-Wave, as well as using a (wall) switch. The maximum load capacity is 16A per channel and a combined maximum of 25A. Supported load types Resistive (Ohms) – Incandescent, halogen, heaters Capacitive – Electronic equipment with capacitors Inductive (with RC Snubber) – LED lighting, LED drivers, air conditioning and fans Note! The switch-on peak of inductive loads such as LED lighting damages the relays. Use the RC Snubber to absorb this switch-on peak. FeaturesZ- Wave800 110-240VAC Output 2x16A, max 25A totalSwitch connection 2xProtected against overload Protected against overheating Protected against voltage peaks Built-in distribution box, DIN-RailManual

Product number: QPSW-0A2X16EU

€73.00*

Shelly Qubino Wave Pro 2PM

The Shelly Qubino Wave Pro 2PM is a Dinrail mountable Z-Wave 800 actor. The module supports active energy metering and is designed to control 2 devices such as lighting, fans, infrared panels, heaters and other electrical appliances. It is possible to operate the module wirelessly via Z-Wave, as well as using a (wall) switch.The maximum load capacity is 16A per channel and a combined maximum of 25A.Supported load typesResistive (Ohmic) – Incandescent lamp, halogen, heating appliancesCapacitive – Electronic equipment with capacitorsInductive (with RC Snubber) – LED lighting, LED drivers, air conditioning and fansNote! The switch-on peak of inductive loads such as LED lighting damages the relays. Use the RC Snubber to absorb this switch-on peak.FeaturesZ-Wave 800110-240VACOutput 2x16A, max 25A totalSwitch connection 2xCurrent measurementProtected against overloadProtected against overheatingProtected against voltage peaks Built-in distribution box, DIN RailManual

Product number: QPSW-0A2P16EU

€103.00*

Shelly Qubino Wave Pro 3

The Shelly Wave Pro 3 is a professional DIN rail module with three individually switchable relay outputs, suitable for residential and commercial Z-Wave installations. Thanks to the Z-Wave 800 chipset, the module supports both mesh networks and Z-Wave Long Range (selectable during inclusion). Each output supports loads up to 16 A (48 A total) and can be operated locally via a connected wall switch or remotely via a Z-Wave gateway. The relays are volt-free and suitable for switching voltages up to 240 V AC or 30 V DC. The module is protected against overcurrent and overheating and includes energy metering per channel, making it suitable for demanding applications such as lighting, heating systems, fans and other electrical devices. Supported load types Resistive (Ohmic) – Incandescent, halogen, heating appliances Capacitive – Electronic equipment with capacitors Inductive (with RC Snubber) – LED lighting, LED drivers, air conditioners and fans Note! The inrush current of inductive loads such as LED lighting may damage the relays. Use an RC Snubber to suppress these inrush currents. Features DIN rail mounting, suitable for standard electrical panels 3x relay output (each up to 16 A resistive, 48 A total) 3x switch input (230 V AC) for local control Volt-free relay contacts Supports Z-Wave mesh and Long Range (selectable during inclusion) Real-time energy metering per channel Protection against overcurrent and overheating Z-Wave 800 chipset (Z-Wave Plus v2) Dimensions: 94 × 19 × 69 mm (3 DIN units wide)

Product number: QUSW-0A3X16EU

€106.00*

Shelly Qubino Wave Pro Shutter

The Shelly Qubino Wave Pro Shutter module is a Z-Wave 800 built-in module (DIN rail) for operating and accurately positioning 240VAC bi-directional motors. Ideal for control from central switch or distribution cabinets. The module supports active energy measurement and is designed for operating motorized curtains, blinds, screens, awnings and other motor-controlled solutions with electronic or mechanical limit switches. It is possible to control the module wirelessly via Z-Wave, as well as using a connected wall switch(es). The module can be powered with a voltage of 110-240VAC. The maximum load capacity per output is a maximum of 16A. It can be operated with single or double wall switches. In addition, the module is equipped with multiple protection functions, including protection against overheating, overvoltage and overcurrent. Features • Z-Wave 800 series • Automatic calibration of endpoints • Blind position support (tilt) • Maximum load capacity: 16A • Protected against overheating • Supports over-the-air firmware updates (OTA) • Can be used with different types of switches

Product number: QPSH-0A1P10EU

€104.00*

Shelly Qubino Wave Shutter

The Shelly Qubino Wave Shutter module is a Z-Wave 800 built-in module for operating and accurately positioning 230VAC bi-directional motors. The module supports active energy measurement and is designed to operate motorized curtains, blinds, screens, awnings and other motor-controlled solutions with electronic or mechanical limit switches. It is possible to control the module wirelessly via Z-Wave, as well as using a connected wall switch(es). The module can be powered with a voltage of 110-240VAC. The maximum load capacity per output is a maximum of 10A. It can be operated with single or double wall switches. In addition, the module is equipped with multiple protection functions, including protection against overheating, overvoltage and overcurrent. Features • Z-Wave 800 series • Automatic calibration of endpoints • Blind position support (tilt) • Maximum load capacity: 10A • Protected against overheating • Supports over-the-air firmware updates (OTA) • Can be used with different types of switches

Product number: QNSW-001P10EU

€38.00*

New

Shelly Wave 1 LR

The Shelly Wave 1 LR is a Z-Wave 800 in-wall switch with one dry contact output. The module is designed for switching a wide range of electrical devices, such as lighting, electric locks, garage doors, gates, irrigation systems and other automation applications. Thanks to support for both traditional Z-Wave mesh and Z-Wave Long Range, the module is suitable for installations where extended wireless range is required. The module can be powered with 110-240V AC, 24-48V DC or 12V DC and features a dry contact output. This allows the control voltage to differ from the voltage of the connected device, providing additional installation flexibility. The output supports loads up to 16A. In addition, the module is protected against overheating and supports secure communication via Z-Wave S2. Features Z-Wave 800 series with support for mesh and Long Range Switch with dry contact output Maximum load: 16A Power supply: 110-240V AC, 24-48V DC or 12V DC S2 Security (Authenticated/Unauthenticated) SmartStart for quick and easy installation Protected against overheating Supports over-the-air firmware updates (OTA) Can be used with different types of switches Supports scenes and automations within Z-Wave systems

Product number: QLSW-001X16EU

€34.00*

Shelly Wave 1 Mini LR

The Shelly Wave 1 Mini LR is a very compact Z-Wave 800 series module with a potential-free contact, designed to fit behind wall switches, power outlets, or in a surface-mount box. It can be used to control lighting, small appliances, garage doors, or security systems. Supports both classic Z-Wave mesh and Z-Wave Long Range for extended coverage. Features: Potential-free contact (max. 8 A AC 230V / 5 A DC up to 30V) Power supply 230V Size 29 x 35 x 16 mm Wire 0.5 to 1.5 mm² Z-Wave 800 (mesh and Long Range) – selectable at inclusion S2 security (Authenticated/Unauthenticated) Low energy consumption (< 0.3 W) Easy installation, compact size SmartStart support for quick inclusion

Product number: QTSW-0A1X8EU

€31.00*

New

Shelly Wave 1PM LR

The Shelly Wave 1PM LR is a compact Z-Wave 800 series switching module with integrated power metering, designed for installation behind wall switches, power outlets or inside electrical back boxes. The module enables smart control of lighting and other electrical loads up to 16A while accurately monitoring energy consumption. Thanks to support for both traditional Z-Wave mesh and Z-Wave Long Range, the module is suitable for standard installations as well as larger homes and buildings requiring extended coverage.Features Power supply 110-240V AC or 24-30V DCMaximum load 16AIntegrated power meteringZ-Wave 800 (mesh and Long Range) – selectable during inclusionSmartStart for quick and easy installationS2 Security (Authenticated/Unauthenticated)Protected against overheating and overloadSupports over-the-air firmware updates (OTA)Functions as a Z-Wave repeater in mesh networksDimensions 37x42x16 mmWire size 0.5 to 1.5 mm²

Product number: QLSW-001P16EU

€35.00*

Shelly Wave 1PM Mini LR

The Shelly Wave 1PM Mini LR is a very compact Z-Wave 800 series module with one switchable contact and power metering, designed to fit behind wall switches, power outlets or in a surface-mount box. It can be used to control lighting, small appliances, garage doors or security systems. Supports both classic Z-Wave mesh and Z-Wave Long Range for extended coverage. Features Power supply 230V Maximum load 8A / 2000 watts Protected against overheating Z-Wave 800 (mesh and Long Range) – selectable at inclusion S2 security (Authenticated/Unauthenticated) Supports over-the-air firmware updates (OTA) Size 29x35x16 mm Wire 0.5 to 1.5 mm²

Product number: QTSW-0A1P8EU

€33.00*

New

Shelly Wave 2PM LR

The Shelly Wave 2PM LR is a Z-Wave 800 in-wall switch with two independently controllable outputs and integrated power metering. The module is designed for controlling and monitoring devices such as lighting, fans, electric radiators, infrared panels and other electrical loads. Thanks to support for both traditional Z-Wave mesh and Z-Wave Long Range, the module is suitable for installations where extended wireless range is required. The module can be powered with 110-240V AC or 24V DC, providing flexibility for various installations. Both outputs can switch loads up to 10A individually, with a maximum combined load of 16A. The integrated power metering allows accurate monitoring of the energy consumption of connected devices. In addition, the module features several protection mechanisms, including overheating, overvoltage and overcurrent protection. The module also supports SmartStart for quick installation and secure communication via Z-Wave S2. Features Z-Wave 800 series with support for mesh and Long Range Two independently controllable outputs with power metering Maximum load per output: 10A Maximum combined load: 16A Power supply: 110-240V AC or 24V DC S2 Security (Authenticated/Unauthenticated) SmartStart for quick and easy installation Protected against overheating, overvoltage and overcurrent Supports over-the-air firmware updates (OTA) Can be used with different types of switches Supports scenes and automations within Z-Wave systems

Product number: QLSW-002P16EU

€38.00*

Shelly Wave Dimmer LR

The Shelly Wave Dimmer is a compact in-wall Z-Wave® dimmer for lighting, compatible with both mesh and Long Range topologies thanks to its Z-Wave 800 chipset. During inclusion, you can select either network type. You can connect 2 switches and control 1 output for dimmable lights up to 150 W (LED) / 200 W (halogen/incandescent). With a Shelly Bypass (sold separately), the Shelly Dimmer also supports 2-wire installations. Key features: Inputs: 2× switch/push-button via screw terminals Outputs: 1× dimmable light output via screw terminals Max load: LED up to 150 W, halogen/incandescent up to 200 W Also suitable for 2-wire installations with Shelly Bypass (sold separately) Network: Z-Wave mesh and Long Range – selectable during inclusion Security: S2 (Authenticated/Unauthenticated), S0, Unsecure Protection: internal protection against overheating (>95 °C), overcurrent (>0.9 A +15%) and overvoltage (>240 V +15%) LED indicator: RGB LED for status and signals (includes LED mode for alarms) OTA updates: supported via gateway

Product number: QLDM-0A101EUL

€51.00*

Shelly Wave Door/Window

The Shelly Wave Door/Window LR is a sensor for accurately detecting the opening or closing of doors and windows. The sensor can also measure light intensity and, specifically for tilt-and-turn windows, it includes a tilt function to detect whether a window is opened in tilt or turn mode. Thanks to the ultra-low-power Z-Wave S800 chipset, both Z-Wave mesh and Z-Wave Long Range are available. To use the tilt function, the sensor itself (not the magnet) must be mounted on the moving part. Note! the sensor does not yet have full support on the aforementioned platforms. Check the current compatibility via the manual link at the bottom. Based on our own testing on the HC3, open/close works correctly. Lux also works but will only update on open/close or wake-up. The tilt function does not seem to work in ZW engine 2.0. Note that the unit is added in single-channel mode (see associations) and must be corrected.See the Shelly knowledge base link; they state that the product works fully on FIBARO/Nice Engine 3.0 Features Z-Wave 800 chipset, both Z-Wave mesh and Z-Wave Long RangeS2 securityOpen/close, lux and tilt detectionCR2032 batterySensor dimensions 35 x 35 x 7 mmMagnet dimensions 35 x 12 x 7 mmFor indoor use Manual

Product number: QLDW-002CEU

€32.00*

Shelly Wave H&T - White LR

The Shelly Wave H T is a smart Z-Wave® temperature and humidity sensor, featuring S2 security and ultra-low power consumption thanks to its Z-Wave 800 chipset. Supporting both traditional Z-Wave® (mesh) and Z-Wave® Long Range, as well as SmartStart functionality, this device allows you to choose the optimal network type during inclusion based on your installation setup. Ideal for households, offices, educational institutions, and MDUs. Key features: Sensors: Temperature + humidity Security: Z-Wave® Unsecure, S0, S2 Unauthenticated / S2 Authenticated Z-Wave 800 Series (Z-Wave Mesh Network and Z-Wave Long Range Star Network) SmartStart inclusion: Add via QR code within 10 minutes after power-up Battery: CR123A (up to 2 years battery life) OTA updates: Firmware updates possible via gateway

Product number: QLHT-0U2ZEU

€33.00*

New

Shelly Wave i4 DC LR

The Shelly Wave i4 DC LR is a Z-Wave 800 input module with four digital inputs, designed to trigger scenes and automations within a Z-Wave network. The module does not include relay outputs, but enables other Z-Wave devices to be controlled using conventional switches or push buttons. Thanks to support for both traditional Z-Wave mesh and Z-Wave Long Range, the module is suitable for installations where extended wireless range is required. The Wave i4 DC LR can be powered with 5 to 24V DC and is suitable for low-voltage applications. The four inputs can be used to perform various actions, such as triggering scenes, controlling lighting or starting complex automations within a Z-Wave system. Multiple actions can be configured per input based on different button press patterns, such as single, double or long press. The module supports SmartStart for quick installation and uses Z-Wave S2 security for secure communication within the network. Thanks to its compact size, the module can be installed behind existing switches or inside electrical back boxes. Features Z-Wave 800 series with support for mesh and Long Range Four digital inputs for switches or push buttons No relay outputs – designed exclusively for scene and automation control Power supply: 5-24V DC Supports single, double and long button presses Supports multiple actions per input SmartStart for quick and easy installation S2 Security (Authenticated/Unauthenticated) Supports over-the-air firmware updates (OTA) Compact size for installation behind switches or in electrical back boxes Low power consumption (< 0.3W)

Product number: QLSN-0D24XEU

€31.00*

Shelly Wave i4 LR

The Shelly Wave i4 LR is a compact Z-Wave 800 series input module that can be installed behind an existing wall switch. The module has four digital inputs and is designed for activating scenes and automations via different click patterns. Supports both classic Z-Wave mesh and Z-Wave Long Range for extended coverage. Features: 4 digital inputs for control (single, double, long press and release) Supports a total of 16 actions via multi-click Z-Wave 800 (mesh and Long Range) – selectable at inclusion S2 security (Authenticated/Unauthenticated) Battery-free, low consumption (< 0.2 W) Compact design, fits behind wall switch Size: 37 x 42 x 16 mm Power supply 230V

Product number: QLSN-0A24XEU

€31.00*