The SONOFF SNZB-05P is a Zigbee 3.0 sensor that reports water leaks. A raised probe detects water from 0.5 mm and also works reliably on metal surfaces; the housing is IP67.
On detection the sensor immediately sends a push notification and, via a scene, can trigger an alarm on the gateway, even if Wi-Fi fails. You place it on the floor, for instance near a boiler, bath, kitchen, basement or attic. For larger or narrow areas a water leak detection cable can be connected, which can be extended in series without a length limit. The sensor works with Zigbee 3.0 hubs such as NSPanel Pro, iHost, the ZB Bridge variants and SmartThings Hub V3, and with Home Assistant via ZHA or Zigbee2MQTT. This version is the sensor without a cable; the SNZB-05PC is supplied with a cable.
Specifications
- Model: SNZB-05P
- Application: Zigbee water leak sensor
- Protocol: Zigbee 3.0 (IEEE 802.15.4)
- Ingress protection: IP67
- Range: detects water from 0.5 mm; range 130 m (open space)
- Battery: CR2477 (3 V), up to 5 years at 50 triggers per day according to the manufacturer
- Dimensions: 48 × 48 × 21.6 mm; 34.3 g (without battery)
A Zigbee gateway is required. The sensor is suitable for indoor use.
| Battery type: | CR2477 |
|---|---|
| IP value: | IP67 |
| Matter: | No |
| Operating temperature: | -10℃ ~ 60℃ |
| Protocol: | Zigbee 3.0 |