The SONOFF ZBDongle-PMG24 (Dongle Plus MG24) is a Zigbee/Thread USB dongle based on the EFR32MG24 chip. As delivered it works as a Zigbee coordinator for open-source platforms such as Home Assistant, openHAB and Zigbee2MQTT, so Zigbee devices are controlled locally.
With the SONOFF Dongle Flasher (web tool or add-on) the dongle can be switched in about a minute to Zigbee router firmware, OpenThread RCP or MultiPAN RCP. As a router it strengthens the existing Zigbee network; with OpenThread RCP it works with a Thread Border Router for Matter over Thread. The housing is made of aluminium alloy (tested by SONOFF in a 24-hour salt spray test) and the default antenna gain of 3 dBi can, according to SONOFF, be optimised up to 4.5 dBi. A 1 m USB extension cable limits interference from USB 3.0 ports. Supported operating systems: Windows, Ubuntu, Raspberry Pi OS and Docker.
Specifications
- Model: ZBDongle-PMG24 (Dongle Plus MG24, Dongle-PMG24)
- Application: Zigbee coordinator for open-source platforms; can also be flashed as Zigbee router or Thread radio
- Chip: EFR32MG24
- Protocol: Zigbee 3.0, IEEE 802.15.4, 2.4 GHz; OpenThread (with other firmware)
- Range: up to 200 m in free line of sight; antenna gain 3 dBi
- Supply: USB, 5 V 500 mA; standby 40 mW
- Firmware: coordinator firmware (EmberZNet) pre-installed; router firmware, OpenThread RCP and MultiPAN RCP can be flashed with the SONOFF Dongle Flasher
- Housing: aluminium alloy
- Dimensions: 10 × 18 × 214 mm
- Operating temperature: -10 … 60 °C, 5–95 % RH
- Contents: dongle, 1 m USB extension cable, quick guide
A Zigbee network can have only one coordinator: with coordinator firmware the dongle cannot be added by another gateway. Use one integration (ZHA or Zigbee2MQTT) per dongle.
| Hub - Other Controllers & Bridges: | Other Controllers & Bridges |
|---|---|
| Matter: | No |
| Operating temperature: | -10℃ ~ 60℃ |
| Port(s): | USB-A |
| Protocol: | Thread, Zigbee 3.0 |