The SONOFF SWV-BSP is a battery-powered Zigbee 3.0 water valve that is fitted between a tap and a hose. It is intended for automatic watering of lawns, borders, vegetable plots or potted plants, by time or by volume. The BSP version has a G3/4-14 thread and is intended for the United Kingdom, Europe and most regions.
You choose between schedules and volume mode, each with single or cyclic irrigation, and you can see the water consumption and irrigation time for up to 180 days back. The built-in flow meter measures 2 to 39 L/min and adjusts the calculation for fluctuating water pressure. If the flow drops below 2 L/min, the valve recognises this as ‘no water’ and closes after 30 minutes. Vertical installation is recommended, as horizontal installation can increase the flow meter’s measurement error. Sealing tape and a rubber gasket are supplied for sealing. The valve works with Zigbee 3.0 hubs such as NSPanel Pro, iHost, ZB Bridge-P, ZB Bridge-U and ZBDongle-E/-P, and with Home Assistant. For North America there is the SWV-NH with a different thread.
Specifications
- Model: SWV-BSP
- Application: Zigbee water valve for garden irrigation, between tap and hose
- Thread: G3/4-14 (BSP), 3/4"
- Supply: 4 × AA batteries (6 V), not included
- Protocol: Zigbee 3.0
- Pressure and flow: working pressure 0.06–0.8 MPa; flow 2–39 L/min
- Ingress protection: IP55
- Dimensions: 152 × 100 × 46 mm; 278 g
- Operating temperature: ambient 5 … 60 °C; water 5 … 40 °C
Do not use in freezing conditions; the operating range is 5 to 60 °C. A Zigbee gateway is required. Four AA batteries are not supplied.
| Battery type: | 4 x AA |
|---|---|
| IP value: | IP55 |
| Matter: | No |
| Protocol: | Zigbee 3.0 |