The SONOFF ZBMINI-L2-E (ZBMINIL2-E, Orb-ZBW1L from the Fusion series) is a Zigbee 3.0 wall switch for one lighting circuit that works without a neutral wire. It uses the same switching technology as the ZBMINIL2 module, but as a complete 86 × 86 mm wall switch with a control front rather than a separate module behind an existing switch.
The switch works with a Zigbee gateway for schedules, countdown timers and scenes and switches up to 6 A at 100–240 V AC (resistive load up to 1440 W). For LED lighting the maximum is 300 W at 240 V, with a minimum load of 3 W and no separate anti-flicker module required. It is a Zigbee end device and therefore not a router; separate routers are needed to extend the mesh.
Specifications
- Model: ZBMINIL2-E (Orb-ZBW1L, Fusion)
- Application: Light switching without neutral wire
- Supply: 100–240 V AC, 50/60 Hz
- Load: 6 A max., resistive load 1440 W; LED 300 W at 240 V, 3 W minimum
- Protocol: Zigbee 3.0, end device (not a router)
- Control: Zigbee gateway, schedules and scenes
- Mounting: wall switch, 86 × 86 mm
- Dimensions: 86 × 86 × 35.8 mm; 80 g
- Wiring: 16–14 AWG, solid or stranded copper conductor
Have the mains installation carried out by a qualified installer, with a 6 A circuit breaker or RCBO upstream of the switch. Do not connect an anti-flicker module. A Zigbee 3.0 gateway is required.
| Actors: | Switch |
|---|---|
| Installation method: | Flush mount |
| Matter: | No |
| Power source: | 100-240V AC, 50/60Hz |
| Protocol: | Zigbee 3.0 |