The wholesaler for smart home professionals
Shipping within 24h
B2B portal
Direct delivery from stock
Technical support

SONOFF DUALR3 2-Gang Wi-Fi Smart Switch

SONOFF Wi-Fi in-wall module with two relays, 10 A per channel and power metering per channel. Switch and motor mode for shutters and curtains.
Product number: DUALR3
Manufacturer: SONOFF
EAN: 6920075775402
Manufacturer product ID: DUALR3
Product information "SONOFF DUALR3 2-Gang Wi-Fi Smart Switch"

The SONOFF DUALR3 is a Wi-Fi in-wall module with two independent relays and power metering per channel. In switch mode it controls two separate loads, in motor mode a roller-shutter, curtain or sun-blind motor, and in meter mode it acts as a stand-alone meter.

For each channel the module measures voltage, current and power, and with the overload protection in the eWeLink app you set thresholds at which the channel switches off. Each channel switches up to 10 A, with 15 A in total; in motor mode the load is 1 A. Two inputs take external switches (rocker, momentary or SPDT), so the wall control is retained. No separate gateway is needed and there is local LAN control.

Specifications

  • Model: DUALR3
  • Application: Two-load switching or shutter motor control, with power metering
  • Supply: 100–240 V AC, 50/60 Hz
  • Load: 10 A per channel, 15 A total; motor load 1 A
  • Protocol: Wi-Fi 2.4 GHz (IEEE 802.11 b/g/n)
  • Control: eWeLink app, LAN control, two external switch inputs
  • Mounting: in-wall
  • Dimensions: 54 × 49 × 24 mm
  • Operating temperature: −10 … 40 °C

Have the mains installation carried out by a qualified installer, with upstream protection matching the load. Select the working mode in the eWeLink app before commissioning; in motor mode the motor determines the maximum load.

Properties
Actors: Switch
Channel: 2-way
Installation method: Flush mount
Power source: 100-240V AC, 50/60Hz
Protocol: WiFi 2.4GHz
Downloads "SONOFF DUALR3 2-Gang Wi-Fi Smart Switch"
New
SONOFF NSPanel Smart Scene Wall Switch EU Black
The SONOFF NSPanel-EU (NSPanel Smart Scene Wall Switch, black version) is an 86 × 86 mm wall switch with two relays, a 3.5-inch touchscreen and a built-in temperature sensor. The two physical keys switch the connected loads; on the screen you control devices, groups and manual scenes from the same eWeLink account. As a thermostat the panel controls heating or cooling equipment based on its own temperature measurement, with up to six time periods in automatic mode. The screen also shows time, date and weather. Without a network connection the thermostat and screen functions that rely on the server are unavailable; on/off switching, the power-on state and inching remain controllable. LAN control is supported. The load per channel is 2 A (480 W), 4 A (960 W) in total. Specifications Model: NSPanel-EU Application: Wall switch with touchscreen, thermostat function and two relays Colour: black Supply: 100–240 V AC, 50/60 Hz, neutral wire required Load: 2 A (480 W) per channel, 4 A (960 W) total Protocol: Wi-Fi 2.4 GHz (IEEE 802.11 b/g/n) Display: 3.5-inch TFT touchscreen, 480 × 320 px Dimensions: 86 × 86 × 41.7 mm Operating temperature: −10 … 40 °C The panel works with live and neutral wires. Have the mains installation carried out by a qualified installer, with a suitable circuit breaker in the consumer unit.
Product number: NSPanel-EU

€41.24*
New
SONOFF Dongle PMG24 Zigbee/Thread USB Dongle
The SONOFF ZBDongle-PMG24 (Dongle Plus MG24) is a Zigbee/Thread USB dongle based on the EFR32MG24 chip. As delivered it works as a Zigbee coordinator for open-source platforms such as Home Assistant, openHAB and Zigbee2MQTT, so Zigbee devices are controlled locally. With the SONOFF Dongle Flasher (web tool or add-on) the dongle can be switched in about a minute to Zigbee router firmware, OpenThread RCP or MultiPAN RCP. As a router it strengthens the existing Zigbee network; with OpenThread RCP it works with a Thread Border Router for Matter over Thread. The housing is made of aluminium alloy (tested by SONOFF in a 24-hour salt spray test) and the default antenna gain of 3 dBi can, according to SONOFF, be optimised up to 4.5 dBi. A 1 m USB extension cable limits interference from USB 3.0 ports. Supported operating systems: Windows, Ubuntu, Raspberry Pi OS and Docker. Specifications Model: ZBDongle-PMG24 (Dongle Plus MG24, Dongle-PMG24) Application: Zigbee coordinator for open-source platforms; can also be flashed as Zigbee router or Thread radio Chip: EFR32MG24 Protocol: Zigbee 3.0, IEEE 802.15.4, 2.4 GHz; OpenThread (with other firmware) Range: up to 200 m in free line of sight; antenna gain 3 dBi Supply: USB, 5 V 500 mA; standby 40 mW Firmware: coordinator firmware (EmberZNet) pre-installed; router firmware, OpenThread RCP and MultiPAN RCP can be flashed with the SONOFF Dongle Flasher Housing: aluminium alloy Dimensions: 10 × 18 × 214 mm Operating temperature: -10 … 60 °C, 5–95 % RH Contents: dongle, 1 m USB extension cable, quick guide A Zigbee network can have only one coordinator: with coordinator firmware the dongle cannot be added by another gateway. Use one integration (ZHA or Zigbee2MQTT) per dongle.
Product number: ZBDongle-PMG24

€29.67*
New
SONOFF ZBMINI-L2-E Zigbee Smart Switch (No Neutral)
The SONOFF ZBMINI-L2-E (ZBMINIL2-E, Orb-ZBW1L from the Fusion series) is a Zigbee 3.0 wall switch for one lighting circuit that works without a neutral wire. It uses the same switching technology as the ZBMINIL2 module, but as a complete 86 × 86 mm wall switch with a control front rather than a separate module behind an existing switch. The switch works with a Zigbee gateway for schedules, countdown timers and scenes and switches up to 6 A at 100–240 V AC (resistive load up to 1440 W). For LED lighting the maximum is 300 W at 240 V, with a minimum load of 3 W and no separate anti-flicker module required. It is a Zigbee end device and therefore not a router; separate routers are needed to extend the mesh. Specifications Model: ZBMINIL2-E (Orb-ZBW1L, Fusion) Application: Light switching without neutral wire Supply: 100–240 V AC, 50/60 Hz Load: 6 A max., resistive load 1440 W; LED 300 W at 240 V, 3 W minimum Protocol: Zigbee 3.0, end device (not a router) Control: Zigbee gateway, schedules and scenes Mounting: wall switch, 86 × 86 mm Dimensions: 86 × 86 × 35.8 mm; 80 g Wiring: 16–14 AWG, solid or stranded copper conductor Have the mains installation carried out by a qualified installer, with a 6 A circuit breaker or RCBO upstream of the switch. Do not connect an anti-flicker module. A Zigbee 3.0 gateway is required.
Product number: ZBMINIL2-E

€16.45*
New
SONOFF MINIR4M Matter Over Wi-Fi Smart Switch
The SONOFF MINIR4M (MINI Extreme) is a compact Wi-Fi in-wall module with Matter support for one switching channel up to 10 A. The module requires a neutral wire and fits small back boxes, so an ordinary switch or lamp becomes smart without an extra gateway. Thanks to Matter over Wi-Fi the module links to platforms such as Apple Home, Google Home, Alexa, SmartThings or Home Assistant. Momentary, SPDT or latching switches connect to the inputs, so local control keeps working. With the ‘Detach Relay’ mode the relay state can be kept separate from the external switch. The module switches a maximum of 10 A (2400 W at 240 V). Voice control via Home Assistant needs a separate voice device. Specifications Model: MINIR4M (MINI Extreme) Application: Switching lighting and small loads (neutral wire required) Supply: 100–240 V AC, 50/60 Hz Load: 10 A max. (2400 W at 240 V) Protocol: Matter over Wi-Fi (2.4 GHz, IEEE 802.11 b/g/n) Control: app, Matter platform and external switch (momentary, SPDT, latching) Mounting: in-wall, suitable for EU/86 boxes Dimensions: 39.5 × 33 × 16.8 mm; 26.7 g Operating temperature: −10 … 40 °C Have the mains installation carried out by a qualified installer, with a 10 A circuit breaker or RCBO upstream of the module. Live and neutral wires must be present; never connect S1 and S2 to neutral or earth.
Product number: MINIR4M

€10.66*
New
SONOFF Zigbee Water Leak Sensor
The SONOFF SNZB-05P is a Zigbee 3.0 sensor that reports water leaks. A raised probe detects water from 0.5 mm and also works reliably on metal surfaces; the housing is IP67. On detection the sensor immediately sends a push notification and, via a scene, can trigger an alarm on the gateway, even if Wi-Fi fails. You place it on the floor, for instance near a boiler, bath, kitchen, basement or attic. For larger or narrow areas a water leak detection cable can be connected, which can be extended in series without a length limit. The sensor works with Zigbee 3.0 hubs such as NSPanel Pro, iHost, the ZB Bridge variants and SmartThings Hub V3, and with Home Assistant via ZHA or Zigbee2MQTT. This version is the sensor without a cable; the SNZB-05PC is supplied with a cable. Specifications Model: SNZB-05P Application: Zigbee water leak sensor Protocol: Zigbee 3.0 (IEEE 802.15.4) Ingress protection: IP67 Range: detects water from 0.5 mm; range 130 m (open space) Battery: CR2477 (3 V), up to 5 years at 50 triggers per day according to the manufacturer Dimensions: 48 × 48 × 21.6 mm; 34.3 g (without battery) A Zigbee gateway is required. The sensor is suitable for indoor use.
Product number: SNZB-05P

€16.45*
New
SONOFF Zigbee Bridge Pro Gen2
The SONOFF ZB Bridge-P (Zigbee Bridge Pro) is a Zigbee 3.0 gateway with a Wi-Fi connection to the eWeLink cloud. It supports up to 128 Zigbee sub-devices, compared with 32 on the earlier ZB Bridge. Schedules and Zigbee linkages run locally in the gateway and so keep working without an internet connection. It also contains a simple security function with Home, Away and Sleep modes, delayed arming and alarm, an alarm buzzer and a list of devices that may trigger an alarm. The security log goes back three months. The bridge works with SONOFF Zigbee devices such as the ZBMINIR2 and the S60ZB plug, with Alexa and Google Home, and is powered via Micro-USB (5 V, 1 A). One gateway is permitted per Zigbee network. Specifications Model: ZB Bridge-P (Zigbee Bridge Pro) Application: Zigbee gateway with Wi-Fi, up to 128 sub-devices Protocol: Wi-Fi 2.4 GHz (IEEE 802.11 b/g/n), Zigbee 3.0 Supply: 5 V DC, 1 A (Micro-USB) Dimensions: 62 × 62 × 20 mm; 39.5 g Operating temperature: −10 … 40 °C A 2.4 GHz Wi-Fi network is required. Changing the Zigbee channel temporarily disconnects all sub-devices.
Product number: Bridge-P

€20.58*
New
SONOFF Wi-Fi Smart Plug (Type F/E)
The SONOFF S60TPF (iPlug) is a Wi-Fi smart plug (Type E/F) with energy monitoring. You switch the connected equipment via the eWeLink app, schedules or scenes, without an extra gateway. The plug measures voltage, current and power in real time and shows the consumption of yesterday, today and the current month, with six months of history that you can export. Thresholds for power, voltage and current make the plug switch off automatically when exceeded. The switching capacity is a maximum of 16 A (4000 W). The enclosure is flame-retardant (V-0) and the plug has short-circuit and surge protection. Local LAN control is possible. Specifications Model: S60TPF (iPlug) Application: Wi-Fi smart plug with energy monitoring (Type E/F) Supply: 250 V AC, 50/60 Hz, 16 A Load: 16 A max., 4000 W Protocol: Wi-Fi 2.4 GHz (IEEE 802.11 b/g/n) Control: eWeLink app, LAN control, schedules and scenes Dimensions: 50 × 50 × 61.5 mm; 79 g Operating temperature: −10 … 40 °C, indoor / binnen / innen / intérieur Do not use the plug for equipment with a high inrush current, such as air conditioners, refrigerators or washing machines, nor for charging electric vehicles. Indoor use only.
Product number: S60TPF

€10.66*
New
SONOFF Zigbee LCD Smart Temperature Humidity Sensor (incl. battery) - SNZB-02D
The SONOFF SNZB-02D is a Zigbee 3.0 temperature and humidity sensor with a 2.8-inch LCD display. The values can be read directly on the device and, via a Zigbee gateway, also followed in the eWeLink app. The sensor is accurate to ±0.2 °C and ±2 % RH and refreshes the measurement every 5 seconds. You set a comfort range and the app sends a notification when it is exceeded, and six months of history can be viewed and exported. The reporting threshold or interval is adjustable. The range in open space is up to 120 m. The display also shows the status of the CR2450 battery. The SNZB-02P is available without a display and with a CR2477 battery. Specifications Model: SNZB-02D Application: Zigbee temperature and humidity sensor with LCD display Protocol: Zigbee 3.0 (IEEE 802.15.4) Accuracy: ±0.2 °C and ±2 % RH Range: −9.9 … 60 °C; 5–95 % RH, non-condensing Display: LCD 2.8" Battery: CR2450 (3 V) Dimensions: 59.5 × 62.5 × 18.5 mm; 69.5 g A Zigbee gateway is required. For indoor use only.
Product number: SNZB-02D

€13.14*
New
SONOFF ZBMINI-L2 Zigbee Smart Switch (No Neutral) 2-pack
The SONOFF ZBMINI-L2 2-pack (ZBMINIL2-2PCS) contains two ZBMINIL2 modules, each a compact Zigbee 3.0 in-wall module for one lighting circuit without a neutral wire. This version is intended for projects or homes where several lighting circuits are equipped at once. Each module is fitted behind an existing switch in the back box, switches up to 6 A at 100–240 V AC and is controlled via a Zigbee gateway or locally via a wall switch or push button on S1/S2. For LED lighting the maximum per module is 300 W at 230 V, with a minimum load of 3 W and no separate anti-flicker module required. The modules are Zigbee end devices and therefore not routers. The only difference from the single ZBMINIL2 is the pack content: two units in one package. Specifications Contents: 2 × ZBMINIL2 module Model: ZBMINIL2 (2-pack) Supply: 100–240 V AC, 50/60 Hz Load: per module 6 A max.; LED 300 W max. at 230 V, 3 W minimum Protocol: Zigbee 3.0, end device (not a router) Control: Zigbee gateway plus wall switch or push button on S1/S2 Dimensions: 39.5 × 32 × 18.4 mm per module Operating temperature: −10 … 40 °C Have the mains installation carried out by a qualified installer, with a 6 A circuit breaker or RCBO upstream of each module. Do not connect an anti-flicker module or inductive loads. A Zigbee 3.0 gateway is required.
Product number: ZBMINIL2-2PCS

€24.71*
New
SONOFF NSPanel Smart Scene Wall Switch EU White
The SONOFF NSPanel-EUW (NSPanel Smart Scene Wall Switch, white version) combines a wall switch with two relays, a 3.5-inch touchscreen and a temperature sensor in an 86 × 86 mm housing. The only difference from the NSPanel-EU is the colour: this model is white, the NSPanel-EU is black. On the screen you set up favourite devices, groups and manual scenes from the eWeLink account, while the two keys continue to switch the local loads. In the thermostat function the panel operates a heating or cooling device, with up to six time periods in automatic mode; the measured temperature can be calibrated. Voice control runs via Alexa, Google Assistant or Alice. The load is 2 A (480 W) per channel and 4 A (960 W) in total. Specifications Model: NSPanel-EUW Application: Wall switch with touchscreen, thermostat function and two relays Colour: white Supply: 100–240 V AC, 50/60 Hz, neutral wire required Load: 2 A (480 W) per channel, 4 A (960 W) total Protocol: Wi-Fi 2.4 GHz (IEEE 802.11 b/g/n) Display: 3.5-inch TFT touchscreen, 480 × 320 px Dimensions: 86 × 86 × 41.7 mm Operating temperature: −10 … 40 °C Live and neutral wires are required. Have the mains installation carried out by a qualified installer, with a suitable circuit breaker in the consumer unit.
Product number: NSPanel-EUW

€41.24*
New
SONOFF Thermostat Core Zigbee Smart Thermostat
The SONOFF TP-WGZBA (Thermostat Core) is a Zigbee 3.0 room thermostat in 86 × 86 mm flush-mount format for water heating. It has two outputs: an active relay output of up to 3 A for underfloor heating actuators and a potential-free contact (COM, NO) for switching on a boiler. There are three weekly schedules, each with up to 12 temperature periods per day, that can be switched between. Operation is with a dial; a built-in radar detects presence (distance in three steps) and switches the display on or off. An external Zigbee temperature sensor from the SNZB-02 series on the same gateway can provide the actual room temperature, and a door/window sensor (SNZB-04 series) activates anti-freeze mode when a window is opened. Protection: child lock, anti-freeze and overheat protection with an external NTC sensor (10 kΩ, B 3950 K, not included). History of target and actual temperature remains available for up to 6 months. Zigbee2MQTT must be version 2.14.0 or higher. Specifications Model: TP-WGZBA (Thermostat Core) Application: Room thermostat for water heating: controls underfloor heating actuators or a boiler Supply: 100–240 V AC, 50/60 Hz Load: active relay output max. 3 A (resistive load) and potential-free contact (COM, NO) for boiler control Protocol: Zigbee 3.0, IEEE 802.15.4 Control: dial; setting range 5–30 °C; 3 weekly schedules with up to 12 time periods per day; child lock, anti-freeze Detection: presence detection (radar): approx. 0.3 / 0.6 / 1 m; window-open detection via Zigbee door/window sensor Wiring: optional external NTC floor sensor 10 kΩ, B 3950 K (not included); wire 0.2–3.5 mm² Mounting: flush mounting; in-wall depth 31.5 mm; screw distance 60 mm Dimensions: 86 × 86 × 45.5 mm; 155 g Housing: PC, white Operating temperature: 0 … 50 °C, ≤ 90 % RH non-condensing According to SONOFF, the output of 3 A maximum is not suitable for direct connection of electric underfloor heating. Always switch off the mains supply before installation, maintenance or wiring and have the work carried out by a qualified installer. A Zigbee hub is required.
Product number: TP-WGZBA

€32.98*
New
SONOFF SNZB-01P Zigbee Wireless Switch (incl. battery)
The SONOFF SNZB-01P is a compact wireless Zigbee 3.0 button. For each press type you set separate actions for a single, double and long press, so one button can switch several devices or scenes. The button works with Zigbee 3.0 gateways such as the SONOFF NSPanel Pro, ZB Bridge Pro and ZBDongle-E and with most other gateways that follow Zigbee 3.0. You can also use it as an emergency button that sends a notification to housemates’ phones, or as a trigger for an Alexa routine (with an Alexa Zigbee hub). It is intended for two-way light switching, a doorbell or a coffee-machine button, among other uses. For more scenes on one controller there is the four-button SNZB-01M. Specifications Model: SNZB-01P Application: Wireless Zigbee button with single, double and long press Protocol: Zigbee 3.0 (IEEE 802.15.4) Battery: CR2477 (3 V), up to 5 years according to the manufacturer (lab test) Mounting: adhesive or screw, indoor Dimensions: 45 × 45 × 17.7 mm; 27.7 g Operating temperature: −10 … 60 °C A Zigbee gateway is required. The button is suitable for indoor mounting.
Product number: SNZB-01P

€13.97*
New
SONOFF MINI-D Matter Over Wi-Fi Dry Contact Switch
The SONOFF MINI-D is a Wi-Fi switch with a dry contact and Matter support. It controls equipment that only expects a dry contact signal, such as a garage door opener, a boiler or a gate, and can be powered either from the mains (100–240 V AC) or from 12–48 V DC. The output is a dry contact in NO or NC configuration and is suitable for direct current only: 24 V DC at 2 A resistive load or a 12/24 V DC motor up to 8 W. Alternating-current loads must not be connected to the output. For higher power, switch a contactor. Via Matter, on/off control, voice control and scenes are available in platforms such as Apple Home, Google Home, Alexa and Home Assistant. With the eWeLink app no separate hub is needed. Specifications Model: MINI-D Application: Dry contact for e.g. garage door, boiler or DC motor Supply: 100–240 V AC (0.1 A max.) or 12–48 V DC (1 A max.) Load: DC output only: 24 V DC / 2 A resistive load or 12/24 V DC motor up to 8 W Protocol: Matter over Wi-Fi (2.4 GHz, IEEE 802.11 b/g/n) Control: eWeLink app or Matter platform (on/off) Dimensions: 41 × 43 × 21.5 mm; 34.5 g Operating temperature: −10 … 40 °C Have the mains installation carried out by a qualified installer. Never connect the AC and DC supply at the same time and do not connect an AC load to the output. A Matter controller is required to link to Matter platforms.
Product number: MINI-D

€12.31*
New
SONOFF Zigbee Water Leak Sensor with WLDC200 cable
The SONOFF SNZB-05PC is the set of the SNZB-05P Zigbee water leak sensor with the 2-metre WLDC200 water leak detection cable. The cable registers water along a line rather than at a single point, which is useful behind a boiler, under a washing machine or along a pipe. Several WLDC200 cables can be connected in series with no length limit, and a wet cable can be reused after it has dried completely. A recommended ambient humidity is 0–80 % RH without condensation; very humid rooms can be mistaken for water. On detection the sensor sends a push notification and, via a scene, can start an alarm on the gateway, even without Wi-Fi. The sensor is IP67 and works with Zigbee 3.0 hubs such as NSPanel Pro, iHost and the ZB Bridge variants. Without the cable the SNZB-05P is available. Specifications Model: SNZB-05PC Application: Zigbee water leak sensor Protocol: Zigbee 3.0 (IEEE 802.15.4) Ingress protection: IP67 Set: SNZB-05P sensor + 2 m WLDC200 water leak detection cable Battery: CR2477 (3 V), up to 5 years at 50 triggers per day according to the manufacturer Dimensions: 48 × 48 × 21.6 mm; 34.3 g (without battery) A Zigbee gateway is required. For indoor use only.
Product number: SNZB-05PC

€18.93*
New
SONOFF NSPanel Pro Gen2 White
The SONOFF NSPanel86PW-Relay (NSPanel Pro Gen2, white version) is an 86 × 86 mm control panel with a 3.95-inch touchscreen and two built-in relays. It replaces an existing wall switch and switches one or two lighting groups, up to 5 A per channel and 10 A in total for a resistive load. The panel is a Zigbee 3.0 hub, a Matter hub and a Matter bridge at the same time, so Zigbee and Wi-Fi devices become available in a Matter environment. According to SONOFF its processing power (quad-core Cortex-A35, 2 GB RAM, 32 GB storage) runs several third-party apps, including Home Assistant through F-Droid, without root access. It also offers a thermostat function, energy monitoring, two digital microphones, a 1.5 W speaker, a light sensor and dual-band Wi-Fi (2.4 and 5 GHz). The only difference from the NSPanel86PB-Relay is the colour: this model is white, the NSPanel86PB-Relay is dim gray. Specifications Model: NSPanel86PW-Relay (NSPanel Pro Gen2, wit, 86 mm) Application: Central control panel with two relays replacing an existing wall switch Supply: 100–240 V AC, 50/60 Hz Load: 2 channels, 5 A max. per channel and 10 A total (resistive load) Display: 3.95-inch capacitive touchscreen, 480 × 480 Protocol: Wi-Fi IEEE 802.11 b/g/n/ac/ax 2.4 GHz and 5 GHz; Zigbee 3.0 Gateway: built-in Zigbee hub (EFR32MG24), Matter hub and Matter bridge Chip: quad-core ARM Cortex-A35 (RK3326-S), 2 GB RAM, 32 GB storage Colour: white Housing: PC + CRS Dimensions: 86 × 86 × 39.5 mm; 190 g Operating temperature: -10 … 40 °C, 10–80 % RH non-condensing Have the mains connection carried out by a qualified installer, with the correct upstream protection in the consumer unit. Update the firmware over the air for the latest features.
Product number: NSPanel86PW-Relay

€123.88*
New
SONOFF TRV Gen2 Zigbee Thermostatic Radiator Valve
The SONOFF TRV-ZBT (TRV Gen2) is a Zigbee thermostatic radiator valve with a rotatable IPS colour display. Compared with the TRVZB its volume is 38 % smaller, which helps in tight spaces and complex piping, and the valve movement is low-noise. The valve fits existing M30 × 1.5 mm valves and the supplied adapters fit most heating manufacturers. There are three independent heating plans with a combined maximum of 12 temperature periods. Energy saving comes from open-window detection (temperature drop or linkage with a door/window sensor), an energy-saving mode and linkage with a motion sensor. An external SONOFF temperature sensor from the SNZB-02 series can serve as the measuring point for room temperature. Protections are child lock, anti-calcification, anti-freeze and a low-battery warning. Group control, boost mode and temperature offset are also available, and the history of target temperature, current temperature and heating activity goes back six months. Zigbee2MQTT needs version 2.12.1 or later; via ZHA a script is needed for the full function set. Specifications Model: TRV-ZBT (TRV Gen2) Application: Zigbee thermostatic radiator valve with IPS colour display Thread: M30 × 1.5 mm Supply: 2 × AA (LR6, 1.5 V alkaline) Range: setting range 5 … 30 °C Protocol: Zigbee 3.0 (IEEE 802.15.4) Dimensions: 50 × 50 × 82.9 mm; 169 g (with batteries) Operating temperature: −10 … 50 °C Before installation, check valve compatibility in the manufacturer’s compatibility guide. A Zigbee gateway is required.
Product number: TRV-ZBT

€28.84*
New
SONOFF Zigbee Motion Sensor
The SONOFF SNZB-03P is a Zigbee 3.0 motion sensor using passive infrared technology. It detects moving people within 6 metres and an angle of 110° and switches lights, cameras or alarms via scenes. Detection responds within roughly 5 seconds. Scenes can react to motion, no motion, or no motion for a set time, and also to ambient light level (bright or dim), so that lighting switches on only in the dark. Because the scenes run locally within the Zigbee network, they also work without an internet connection as long as the devices have power. Do not place the sensor in direct sunlight or near heat sources, which can disturb the infrared detection. For detecting people who are sitting still, the radar-based SNZB-06P is the suitable choice. Specifications Model: SNZB-03P Application: Zigbee motion sensor (passive infrared) Protocol: Zigbee 3.0 (IEEE 802.15.4) Range: detection angle 110°, detection distance 6 m Battery: CR2477 (3 V), over 3 years according to the manufacturer Dimensions: 44 × 44 × 65 mm; 54 g Operating temperature: −10 … 60 °C A Zigbee gateway is required. For indoor use only.
Product number: SNZB-03P

€13.64*
New
SONOFF IP65 Zigbee LCD Smart Thermometer (Probe Version)
The SONOFF SNZB-02LD is a Zigbee 3.0 thermometer with a 1.5 m external probe for measuring temperature in liquids and enclosed spaces. The value is shown on a 2.2-inch LCD, and the housing has ingress protection IP65. The probe measures from −40 to 115 °C, the housing operates from −10 to 60 °C. Through a Zigbee hub and the eWeLink app the temperature history can be viewed and exported by day, by month or up to six months back (storage of up to 180 days); alerts for abnormal temperatures and automations based on temperature can be set up. Typical applications are water tanks, refrigerators, pipes and aquariums. IP65 covers splashing water: do not submerge the device or expose it to high-pressure jets or rain. Specifications Model: SNZB-02LD Application: Temperature measurement in liquids and enclosed spaces with an external probe Protocol: Zigbee 3.0 Display: 2.2-inch LCD Ingress protection: IP65 (splash-proof) Operating temperature: housing -10 … 60 °C; probe -40 … 115 °C Battery: CR2477, included Dimensions: 62.8 × 58.5 × 21.8 mm; probe cable 1.5 m; 86.2 g incl. cable Contents: thermometer, quick guide, Velcro strip, card pin, hanging cord A Zigbee 3.0 hub (for example SONOFF iHost, NSPanel Pro, ZBBridge-P, ZBBridge-U or a ZBDongle) is required. Update the hub to the latest firmware before adding the device.
Product number: SNZB-02LD

€16.45*
New
SONOFF Dongle Max Zigbee/Thread PoE Dongle
The SONOFF Dongle-M (Dongle Max) is a Zigbee/Thread dongle based on EFR32MG24 and ESP32 that connects Zigbee devices to open-source platforms such as Home Assistant and Zigbee2MQTT. It works over Ethernet with PoE, over Wi-Fi or over USB-C, so its location is not tied to a USB port on the server. Through the local web console on the network, status, settings and logs can be viewed and the firmware can be switched or updated without disassembly or manual flashing: as Zigbee coordinator, Zigbee router or Thread RCP. Webhooks for backups and alerts when the network drops, MQTT for Home Assistant and remote access via WireGuard VPN are also available. The dongle works with USB and TCP connections and has two adjustable 5 dBi antennas for 360° coverage. The housing is made of aluminium (tested by SONOFF in a 24-hour salt spray test) and the product is CE, FCC and RoHS certified. Specifications Model: Dongle-M (Dongle Max) Application: Zigbee coordinator, router or Thread radio for open-source platforms, via Ethernet (PoE), Wi-Fi or USB Chip: EFR32MG24 + ESP32 Protocol: Zigbee 3.0; Wi-Fi IEEE 802.11 b/g/n 2.4 GHz; Ethernet (RJ45) Supply: 5 V 1 A via USB-C or 48 V 0.25 A via PoE port Control: local web console: status, settings, logs, firmware switching and updates; webhooks, MQTT and VPN (WireGuard) Range: two adjustable 5 dBi antennas Housing: aluminium and PC+ABS, dim gray Operating temperature: -10 … 60 °C Contents: dongle, USB-C to USB cable, quick guide A Zigbee network has one coordinator; use a single integration (ZHA or Zigbee2MQTT) per dongle. If the web console cannot be reached via Dongle-M.local, use the IP address.
Product number: Dongle-M

€35.45*
New
SONOFF DUALR3 2-Gang Wi-Fi Smart Switch
The SONOFF DUALR3 is a Wi-Fi in-wall module with two independent relays and power metering per channel. In switch mode it controls two separate loads, in motor mode a roller-shutter, curtain or sun-blind motor, and in meter mode it acts as a stand-alone meter. For each channel the module measures voltage, current and power, and with the overload protection in the eWeLink app you set thresholds at which the channel switches off. Each channel switches up to 10 A, with 15 A in total; in motor mode the load is 1 A. Two inputs take external switches (rocker, momentary or SPDT), so the wall control is retained. No separate gateway is needed and there is local LAN control. Specifications Model: DUALR3 Application: Two-load switching or shutter motor control, with power metering Supply: 100–240 V AC, 50/60 Hz Load: 10 A per channel, 15 A total; motor load 1 A Protocol: Wi-Fi 2.4 GHz (IEEE 802.11 b/g/n) Control: eWeLink app, LAN control, two external switch inputs Mounting: in-wall Dimensions: 54 × 49 × 24 mm Operating temperature: −10 … 40 °C Have the mains installation carried out by a qualified installer, with upstream protection matching the load. Select the working mode in the eWeLink app before commissioning; in motor mode the motor determines the maximum load.
Product number: DUALR3

€12.31*
New
SONOFF Zigbee Temperature and Humidity Sensor
The SONOFF SNZB-02P is a compact Zigbee 3.0 temperature and humidity sensor without a display. Stick or place it where you need it and follow the values via a Zigbee gateway in the eWeLink app or in your own system. The sensor, with a Swiss hygrometer chip, measures accurately to ±0.2 °C and ±2 % RH and refreshes every 5 seconds. You receive a notification as soon as a set comfort threshold is exceeded, and you can view and export six months of history by day, month or half-year. It works with Zigbee 3.0 hubs such as SONOFF iHost, NSPanel Pro, ZB Bridge Pro and ZBDongle-E, and with third-party hubs such as Echo 4th Gen and SmartThings Hub V3. If you want to read the values on the device itself, choose the SNZB-02D with LCD display. Specifications Model: SNZB-02P Application: Compact Zigbee temperature and humidity sensor Protocol: Zigbee 3.0 (IEEE 802.15.4) Accuracy: ±0.2 °C and ±2 % RH Range: −10 … 60 °C; 5–95 % RH, non-condensing Battery: CR2477 (3 V), up to 4 years according to the manufacturer (lab test) Dimensions: 45 × 45 × 17.7 mm; 26.7 g A Zigbee gateway is required. For indoor use only.
Product number: SNZB-02P

€13.97*
New
SONOFF MINI-RBS Smart Roller Shutter Switch
The SONOFF MINI-RBS is a compact Wi-Fi switch for roller shutter, screen and awning motors. It drives a motor of up to 1 A (100–240 W), fits, according to SONOFF, in small flush-mounting boxes including the European 60 mm boxes, and is Matter compatible. The position can be set in percent and the travel time can be calibrated to compensate for motor deviations. Schedules for opening and closing can be set in the eWeLink app; through Matter (a Matter hub is required) the device can be added to platforms such as Alexa, Apple Home and Google Home. Connecting an external switch (S1/S2) is not mandatory: the app and automations also work without one. If the switching behaviour does not match the switch type, the switch mode can be changed by pressing the button briefly three times. The motor must not run in the same direction for more than 2 minutes; the device then stops automatically. Specifications Model: MINI-RBS Application: Controlling a roller shutter, screen or awning motor Supply: 100–240 V AC, 50/60 Hz Load: motor 100–240 W / 1 A max. Protocol: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz; Matter compatible Control: eWeLink app or Matter platform: percentage position, schedules, travel calibration Mounting: flush mounting, including European boxes (Ø 60 mm) Housing: PC Operating temperature: -10 … 40 °C Have the mains installation carried out by a qualified installer, with a suitable circuit breaker in the consumer unit. Refer to the manual for the wiring diagram.
Product number: MINI-RBS

€13.97*
New
SONOFF Zigbee 3.0 USB Dongle Plus
The SONOFF ZBDongle-E (Zigbee 3.0 USB Dongle Plus) is a USB stick that acts as a Zigbee coordinator for local smart-home systems. It comes pre-flashed with EZNet coordinator firmware (6.10.3) and is ready to use with Home Assistant, openHAB and Zigbee2MQTT. The stick is built around the EFR32MG21 chip with +20 dBm output power and has a shielded aluminium housing that limits interference from surrounding equipment. With the Dongle Flasher web tool the firmware can be switched in about a minute, for instance to router firmware to extend Zigbee range. A USB extension cable between port and stick is recommended to limit interference. Green Power devices are supported; for Hue Green Power the channel must be set to 11, 15, 20 or 25. The difference from the ZBDongle-P lies in the chip and the supported platform: the ZBDongle-P uses a CC2652P. Specifications Model: ZBDongle-E (Zigbee 3.0 USB Dongle Plus) Application: USB Zigbee coordinator for Home Assistant, openHAB and Zigbee2MQTT Chip: EFR32MG21, +20 dBm Firmware: EZNet 6.10.3 Supply: DC 5 V (100 mA max.) Housing: aluminium alloy Dimensions: 75 × 25.5 × 13.5 mm Operating temperature: −10 … 40 °C A host with a USB port and a Zigbee platform such as Home Assistant is required. One stick can be used per ZHA installation.
Product number: ZBDongle-E

€20.58*
New
SONOFF MINI-DIM-E Smart Dimmer Switch
The SONOFF MINI-DIM-E (Orb-DIM from the Fusion series) is a Matter-over-Wi-Fi dimmer in the form of a complete 86 × 86 mm wall switch. Unlike the MINI-DIM in-wall module, this version replaces the existing wall control and has its own control front. The dimmer controls dimmable LED lamps, incandescent and halogen lamps and dimmable electronic transformers in 1 % steps. Dimming uses trailing edge and leading edge; the leading-edge mode is intended only for older fixtures under 100 W, such as incandescent and halogen lamps. Automatic and manual calibration match the dimming range to the lamp, which limits flicker and stepped dimming. The load rating is 400 W resistive or 200 VA LED. Protection against overload, overcurrent and overheating switches off on a fault. Not suitable for fluorescent tubes, CFLs, LED strips or inductive loads such as motors and fans. Specifications Model: MINI-DIM-E (Orb-DIM, Fusion) Application: Dimming dimmable LED, incandescent and halogen lamps Supply: 220–240 V AC, 50 Hz, neutral wire required Load: resistive load 400 W max.; LED 200 VA Protocol: Matter over Wi-Fi (2.4 GHz, IEEE 802.11 b/g/n) Features: power monitoring, 1 % steps, automatic and manual calibration Protection: overload, overcurrent and overheat Mounting: wall switch, 86 × 86 mm Dimensions: 86 × 86 × 33.7 mm; 83 g Operating temperature: −10 … 40 °C The dimmer works on 220–240 V AC only and requires a neutral wire. Have the mains installation carried out by a qualified installer. A Matter controller is required to link with Matter platforms.
Product number: MINI-DIM-E

€24.71*