The SONOFF MINI-DIM-E (Orb-DIM from the Fusion series) is a Matter-over-Wi-Fi dimmer in the form of a complete 86 × 86 mm wall switch. Unlike the MINI-DIM in-wall module, this version replaces the existing wall control and has its own control front.
The dimmer controls dimmable LED lamps, incandescent and halogen lamps and dimmable electronic transformers in 1 % steps. Dimming uses trailing edge and leading edge; the leading-edge mode is intended only for older fixtures under 100 W, such as incandescent and halogen lamps. Automatic and manual calibration match the dimming range to the lamp, which limits flicker and stepped dimming. The load rating is 400 W resistive or 200 VA LED. Protection against overload, overcurrent and overheating switches off on a fault. Not suitable for fluorescent tubes, CFLs, LED strips or inductive loads such as motors and fans.
Specifications
- Model: MINI-DIM-E (Orb-DIM, Fusion)
- Application: Dimming dimmable LED, incandescent and halogen lamps
- Supply: 220–240 V AC, 50 Hz, neutral wire required
- Load: resistive load 400 W max.; LED 200 VA
- Protocol: Matter over Wi-Fi (2.4 GHz, IEEE 802.11 b/g/n)
- Features: power monitoring, 1 % steps, automatic and manual calibration
- Protection: overload, overcurrent and overheat
- Mounting: wall switch, 86 × 86 mm
- Dimensions: 86 × 86 × 33.7 mm; 83 g
- Operating temperature: −10 … 40 °C
The dimmer works on 220–240 V AC only and requires a neutral wire. Have the mains installation carried out by a qualified installer. A Matter controller is required to link with Matter platforms.
| Actors: | Dimmer |
|---|---|
| Installation method: | Flush mount |
| Matter: | Yes |
| Power source: | 220-240V AC, 50Hz |
| Protocol: | Matter, WiFi 2.4GHz |