The SONOFF MINI-ZBRBS-E (Orb-ZBRBS from the Fusion series) is a Zigbee 3.0 roller-shutter switch in the form of a complete 86 × 86 mm wall switch. It controls one roller-shutter, screen or awning motor up to 1 A and replaces the existing wall control, rather than sitting as a separate module behind the switch like the MINI-ZBRBS.
Via a Zigbee gateway you set the position as a percentage, create schedules and scenes and reverse the direction of rotation without rewiring. The switch also works as a Zigbee router and so strengthens the mesh. Two limitations apply: the motor must not run in the same direction for more than 2 minutes at a time (the device then stops automatically) and several motors in parallel on one switch are not supported. If automatic calibration fails, for instance with a very small motor, switch to manual calibration.
Specifications
- Model: MINI-ZBRBS-E (Orb-ZBRBS, Fusion)
- Application: Controlling a roller shutter, screen or awning motor
- Supply: 100–240 V AC, 50/60 Hz, neutral wire required
- Load: motor 1 A max.
- Protocol: Zigbee 3.0, also a Zigbee router
- Control: Zigbee gateway: percentage position, schedules, direction reversal
- Mounting: wall switch for EU round boxes (Ø 60 mm) and 86-type boxes
- Dimensions: 86 × 86 × 34 mm; 84.1 g
- Operating temperature: −10 … 40 °C
A neutral wire is required. Have the mains installation carried out by a qualified installer, with upstream protection matching the motor. A Zigbee 3.0 gateway is needed.
| Actors: | Roller shutter and curtain control |
|---|---|
| Installation method: | Flush mount |
| Matter: | No |
| Maximum load capacity: | 1A |
| Power source: | 100-240V AC, 50/60Hz |
| Protocol: | Zigbee 3.0 |