The SONOFF SNZB-05PC is the set of the SNZB-05P Zigbee water leak sensor with the 2-metre WLDC200 water leak detection cable. The cable registers water along a line rather than at a single point, which is useful behind a boiler, under a washing machine or along a pipe.
Several WLDC200 cables can be connected in series with no length limit, and a wet cable can be reused after it has dried completely. A recommended ambient humidity is 0–80 % RH without condensation; very humid rooms can be mistaken for water. On detection the sensor sends a push notification and, via a scene, can start an alarm on the gateway, even without Wi-Fi. The sensor is IP67 and works with Zigbee 3.0 hubs such as NSPanel Pro, iHost and the ZB Bridge variants. Without the cable the SNZB-05P is available.
Specifications
- Model: SNZB-05PC
- Application: Zigbee water leak sensor
- Protocol: Zigbee 3.0 (IEEE 802.15.4)
- Ingress protection: IP67
- Set: SNZB-05P sensor + 2 m WLDC200 water leak detection cable
- Battery: CR2477 (3 V), up to 5 years at 50 triggers per day according to the manufacturer
- Dimensions: 48 × 48 × 21.6 mm; 34.3 g (without battery)
A Zigbee gateway is required. For indoor use only.
| Battery type: | CR2477 |
|---|---|
| IP value: | IP67 |
| Matter: | No |
| Operating temperature: | -10℃ ~ 60℃ |
| Protocol: | Zigbee 3.0 |