The SONOFF ZBMINI-L2 2-pack (ZBMINIL2-2PCS) contains two ZBMINIL2 modules, each a compact Zigbee 3.0 in-wall module for one lighting circuit without a neutral wire. This version is intended for projects or homes where several lighting circuits are equipped at once.
Each module is fitted behind an existing switch in the back box, switches up to 6 A at 100–240 V AC and is controlled via a Zigbee gateway or locally via a wall switch or push button on S1/S2. For LED lighting the maximum per module is 300 W at 230 V, with a minimum load of 3 W and no separate anti-flicker module required. The modules are Zigbee end devices and therefore not routers. The only difference from the single ZBMINIL2 is the pack content: two units in one package.
Specifications
- Contents: 2 × ZBMINIL2 module
- Model: ZBMINIL2 (2-pack)
- Supply: 100–240 V AC, 50/60 Hz
- Load: per module 6 A max.; LED 300 W max. at 230 V, 3 W minimum
- Protocol: Zigbee 3.0, end device (not a router)
- Control: Zigbee gateway plus wall switch or push button on S1/S2
- Dimensions: 39.5 × 32 × 18.4 mm per module
- Operating temperature: −10 … 40 °C
Have the mains installation carried out by a qualified installer, with a 6 A circuit breaker or RCBO upstream of each module. Do not connect an anti-flicker module or inductive loads. A Zigbee 3.0 gateway is required.
| Actors: | Switch |
|---|---|
| Installation method: | Flush mount |
| Matter: | No |
| Power source: | 100-240V AC, 50/60Hz |
| Protocol: | Zigbee 3.0 |