The SONOFF Zigbee Smart Roller Shutter Switch (MINI-ZBRBS) is a compact Zigbee 3.0 in-wall module for one motorised roller shutter or a sun-blind. Open, close and position are controlled via a compatible gateway, while local operation with a momentary or three-position switch is retained. The motor load is 1 A maximum at 100–240 V AC, 50/60 Hz — intended for the motor control itself, not as a general lighting switch.
Use this module when a roller shutter, screen or awning in an existing back box is to be made controllable and the wall control must remain. Schedules and scenes (for example closing for solar shading or opening in the morning) run through the Zigbee gateway. Because the module is mains-powered, the product data also state that it can act as a Zigbee router in the mesh. Dimensions: 39.5 × 33 × 16.8 mm, operating temperature −10 to 40 °C, indoor use.
Specifications
- Model: MINI-ZBRBS
- Application: roller-shutter and sun-blind control
- Supply/load: 100–240 V AC, 50/60 Hz, motor 1 A max.
- Protocol: Zigbee 3.0; according to the product data also a Zigbee router
- Control: gateway plus momentary or three-position switch
- Mounting: in-wall, indoor
- Dimensions: 39.5 × 33 × 16.8 mm
- Operating temperature: −10 to 40 °C
Do not connect lighting circuits or heavier loads to this module; use a switching module from the same MINI range for those. Have the mains installation carried out by a qualified installer, with the prescribed upstream protection. A Zigbee 3.0 gateway is required.
| Actors: | Roller shutter and curtain control |
|---|---|
| Dimensions Product: | 39,5 x 33 x 16,8 mm |
| Installation method: | Flush mount |
| Matter: | No |
| Maximum load capacity: | 1A |
| Operating temperature: | -10℃ ~ 40℃ |
| Power source: | 100-240V AC, 50/60Hz |
| Protocol: | Zigbee 3.0 |