The SONOFF TP-WGZBA (Thermostat Core) is a Zigbee 3.0 room thermostat in 86 × 86 mm flush-mount format for water heating. It has two outputs: an active relay output of up to 3 A for underfloor heating actuators and a potential-free contact (COM, NO) for switching on a boiler.
There are three weekly schedules, each with up to 12 temperature periods per day, that can be switched between. Operation is with a dial; a built-in radar detects presence (distance in three steps) and switches the display on or off. An external Zigbee temperature sensor from the SNZB-02 series on the same gateway can provide the actual room temperature, and a door/window sensor (SNZB-04 series) activates anti-freeze mode when a window is opened. Protection: child lock, anti-freeze and overheat protection with an external NTC sensor (10 kΩ, B 3950 K, not included). History of target and actual temperature remains available for up to 6 months. Zigbee2MQTT must be version 2.14.0 or higher.
Specifications
- Model: TP-WGZBA (Thermostat Core)
- Application: Room thermostat for water heating: controls underfloor heating actuators or a boiler
- Supply: 100–240 V AC, 50/60 Hz
- Load: active relay output max. 3 A (resistive load) and potential-free contact (COM, NO) for boiler control
- Protocol: Zigbee 3.0, IEEE 802.15.4
- Control: dial; setting range 5–30 °C; 3 weekly schedules with up to 12 time periods per day; child lock, anti-freeze
- Detection: presence detection (radar): approx. 0.3 / 0.6 / 1 m; window-open detection via Zigbee door/window sensor
- Wiring: optional external NTC floor sensor 10 kΩ, B 3950 K (not included); wire 0.2–3.5 mm²
- Mounting: flush mounting; in-wall depth 31.5 mm; screw distance 60 mm
- Dimensions: 86 × 86 × 45.5 mm; 155 g
- Housing: PC, white
- Operating temperature: 0 … 50 °C, ≤ 90 % RH non-condensing
According to SONOFF, the output of 3 A maximum is not suitable for direct connection of electric underfloor heating. Always switch off the mains supply before installation, maintenance or wiring and have the work carried out by a qualified installer. A Zigbee hub is required.
| Color: | White |
|---|---|
| Installation method: | Flush mount |
| Matter: | No |
| Operating temperature: | 0℃ ~ 50℃ |
| Power source: | 100-240V AC, 50/60Hz |
| Protocol: | Zigbee 3.0 |