The SONOFF SenseGuard Motion Gen2 (SNZB-03PR2) is a Zigbee 3.0 motion sensor with PIR detection and a separate light sensor. Lighting or a switching scene is therefore not driven by motion alone, but also by the light level in the room — for example switching only when it is dark enough. Detection according to the product data is around 6 metres within an angle of around 110°. An adjustable magnetic base helps aim the zone, for example in a hallway corner or under a shelf.
Power is a CR2477 battery (3 V DC). Housing 44 × 44 × 65 mm, operating temperature −10 to 60 °C. The stated wireless range of up to 100 m applies in open surroundings and is not a detection distance; in practice the building construction determines how far the Zigbee radio reaches. This is a classic PIR detector, not a radar-based presence sensor: after sitting still the report can drop off.
Specifications
- Model: SNZB-03PR2 (SenseGuard Motion Gen2)
- Sensors: PIR motion and separate light detection
- Detection: around 6 m, around 110°
- Mounting: adjustable magnetic base
- Protocol: Zigbee 3.0 (IEEE 802.15.4)
- Power: CR2477, 3 V DC
- Radio range: up to 100 m in open surroundings (manufacturer figure)
- Dimensions: 44 × 44 × 65 mm; operating temperature −10 to 60 °C
A Zigbee 3.0 gateway is required for scenes, for example Homey Pro or Home Assistant. Aim the lens away from heat sources and restless objects to limit unwanted reports.
| Battery type: | CR2477 |
|---|---|
| Dimensions Product: | 44 x 44 x 65 mm |
| Matter: | No |
| Max. detection angle: | ca. 110° |
| Max. detection range: | ca. 6 m |
| Operating temperature: | -10℃ ~ 60℃ |
| Protocol: | Zigbee 3.0 |
| Sensors: | PIR + Lichtsensor |