The SONOFF MINI-D is a Wi-Fi switch with a dry contact and Matter support. It controls equipment that only expects a dry contact signal, such as a garage door opener, a boiler or a gate, and can be powered either from the mains (100–240 V AC) or from 12–48 V DC.
The output is a dry contact in NO or NC configuration and is suitable for direct current only: 24 V DC at 2 A resistive load or a 12/24 V DC motor up to 8 W. Alternating-current loads must not be connected to the output. For higher power, switch a contactor. Via Matter, on/off control, voice control and scenes are available in platforms such as Apple Home, Google Home, Alexa and Home Assistant. With the eWeLink app no separate hub is needed.
Specifications
- Model: MINI-D
- Application: Dry contact for e.g. garage door, boiler or DC motor
- Supply: 100–240 V AC (0.1 A max.) or 12–48 V DC (1 A max.)
- Load: DC output only: 24 V DC / 2 A resistive load or 12/24 V DC motor up to 8 W
- Protocol: Matter over Wi-Fi (2.4 GHz, IEEE 802.11 b/g/n)
- Control: eWeLink app or Matter platform (on/off)
- Dimensions: 41 × 43 × 21.5 mm; 34.5 g
- Operating temperature: −10 … 40 °C
Have the mains installation carried out by a qualified installer. Never connect the AC and DC supply at the same time and do not connect an AC load to the output. A Matter controller is required to link to Matter platforms.
| Actors: | Switch |
|---|---|
| Installation method: | Flush mount |
| Matter: | Yes |
| Protocol: | Matter, WiFi 2.4GHz |