The Nice SingleSwitch-Control is a compact flush-mounted module for switching a single mains-powered device or circuit on and off while measuring energy consumption. The module operates on 100–240 V AC, 50/60 Hz and switches a resistive load or incandescent lighting up to 8 A. It can be installed behind a wall switch or in a flush box at least 60 mm deep. A live and neutral wire are required for installation.
It can be operated via the Z-Wave network or a connected momentary, toggle or three-way switch. The additional input (S2) is intended for associations and scenes, not for a second load. This makes the module a single-channel mains switch with energy metering: one 100–240 V AC circuit, without a potential-free or low-voltage output.
Features:
- Single-channel mains switch: Switches one circuit at 100–240 V AC, 50/60 Hz, up to 8 A (resistive and incandescent loads).
- Energy metering: Measures active power and energy consumption of the connected load.
- Local control: Works with momentary, toggle and three-way switches; S2 is for associations and scenes, not for a second load.
- Z-Wave 500: Reliable communication, S2 security and repeater functionality.
- Protection: Protection against overheating and overcurrent.
- Compact design: 42.5 × 38.25 × 20.3 mm; flush box at least 60 mm deep. Live and neutral required.
| Actors: | Switch |
|---|---|
| Built-in box: | Ø = 50mm, depth ≥ 60mm |
| Communicatie & Protocol: | Z-Wave |
| In accordance with guidelines: | RED 2014/53/EU RoHS 2011/65/EU |
| Inputs: | 2 |
| Installation method: | Flush mount |
| Maximum load capacity: | 8A |
| Operating temperature: | 0-35 °C |
| Outputs: | 1 |
| Power source: | 100-240V AC, 50/60Hz |
| Protocol: | Z-Wave (500 series chip) |
| Range: | outdoor up to 50m indoors up to 40m (Depending on terrain and building construction) |
| Supported load types: | Resistive |
| Transmit power: | +6 dBm |
| Wireless frequency: | 868.4 or 869.8 MHz EU |