FIBARO Bypass 2

The Shelly Wave Pro Dimmer 2PM is a DIN-rail-mounted dimmer. The module supports active energy measurement and is designed to dim 2 light sources. The Wave Pro Dimmer 2PM can be operated with 2 switches. The smart dimmer works with Z-Wave, using a Z-Wave 800 chipset, and is compatible with Homey, Home Center 3, and other platforms such as Home Assistant and SmartThings. You can easily install the dimmer in your fuse box on a DIN rail, allowing you to dim 2 light sources with a maximum of 200 watts per channel. Note! The dimmer does not yet have full support on the mentioned platforms. Check the current compatibility via the manual link below.Based on our own tests on the HC3, it seems possible to add the unit after several attempts, resulting in a usable endpoint for both channels. Note that the unit needs to be added in Singlechannel mode (see associations) and corrected. Supported Light Sources Incandescent bulbs Dimmable LED and CFL Dimmable electronic transformers Features 110-240VAC Z-Wave 800 chipset Maximum 200 watts per channel (2 channels) S2 security Trailing edge Power measurement Overload protection Overheat protection Surge protection Fuse box installation, DIN rail 19mm width Manual

The Shelly Wave Pro Dimmer 1PM is a DIN-rail-mounted dimmer. The module supports active energy measurement and is designed to dim a single light source. The Wave Pro Dimmer 1PM can be operated with 2 switches. The smart dimmer works with Z-Wave, using a Z-Wave 800 chipset, and is compatible with Homey, Home Center 3, and other platforms such as Home Assistant and SmartThings. You can easily install the dimmer in your fuse box on a DIN rail, allowing you to dim one light source with a maximum of 200 watts. Note! The dimmer does not yet have full support on the mentioned platforms. Check the current compatibility via the manual link below. Based on our own tests on the HC3, it seems possible to add the unit after several attempts, resulting in a usable endpoint. Note that the unit needs to be added in Singlechannel mode (see associations) and corrected. Supported Light Sources Incandescent bulbs Dimmable LED and CFL Dimmable electronic transformers Features 110-240VAC Z-Wave 800 chipset S2 security Maximum 200 watts (1 channel) 2 switch contacts Trailing edge Power measurement Overload protection Overheat protection Surge protection Fuse box installation, DIN rail 19mm width Manual

The Shelly Pro Dimmer 2PM is a DIN rail mountable dimmer. The module supports active energy measurement and is designed for dimming 2 light sources. The smart dimmer works with WiFi, LAN and Bluetooth and is therefore compatible with Homey, Smartthings and Home Assistant, among others. Thanks to the WiFi protocol, you can also use it without a hub via the Shelly Smart Home App. You simply place the dimmer in your distribution box on a DIN rail, you can dim 2 light sources with a maximum of 200 Watts per channel.Supported light sourcesIncandescent lampDimmable LED and CFLDimmable electronic transformersFeatures  Open source  ESP32 chip on board Works stand-alone via LAN or WiFi 2.4 Ghz  Bluetooth for easy pairing  Built-in web server  Access Point and Client Mode  Supported HTTP and/or UDP  Supported mjS scripting  110-240VAC Maximum 200 watts per channelLeading edgeTrailing edge Current measurement  Protected against overload  Protected against overheating  Protected against voltage peaks  Free Android or IOS Shelly Cloud App  Works with MQTT  Easy to install  Built-in distribution box, DIN rail  Scene activation via App

The FIBARO Dimmer 2 is a universal wireless dimmer module with energy consumption measurement. Applicable in 2- and 3-wire installations. The Dimmer 2 supports different types of lighting and dimming techniques. This is automatically detected by an intelligent algorithm. The Dimmer 2 also works stand-alone behind an existing switch. The module can be used in combination with a pulse switch for manual activation of scenes.FeaturesCan be used as stand-alone dimmer without intelligent functionsCan be used in 2-wire and 3-wire installationsAutomatic calibration based on type of lightingWorks with trailing edge and leading edge

The Nice Dimmer-Control has been developed for controlling different types of light sources. The Dimmer-Control supports two types of lighting dimming techniques, including trailing edge and leading edge. Thanks to the intelligent calibration, this is automatically detected. The Dimmer-Control can be used in 2- and 3-wire installations. The module measures the active power consumption of the connected lighting as standard. This product is intended for connection to FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The device can be operated and automated via the Z-Wave network. Features Soft-start function Built-in active power and energy measurement function Intelligent light source detection via automatic calibration Works with various types of switches, including pulse, toggle and toggle switch

The Shelly Pro Dimmer 1PM is a DIN rail mountable dimmer. The module supports active energy measurement and is designed for dimming 1 light source. The smart dimmer works with WiFi, LAN and Bluetooth and is therefore compatible with Homey, Smartthings and Home Assistant, among others. Thanks to the WiFi protocol, you can also use it without a hub via the Shelly Smart Home App. You simply place the dimmer in your distribution box on a DIN rail, you can dim 1 light source with a maximum of 200 Watts. Supported light sources Light bulb Dimmable LED and CFL Dimmable electronic transformers Features  Open source  ESP32 chip on board Works stand-alone via LAN or WiFi 2.4 Ghz  Bluetooth for easy pairing  Built-in web server  Access Point and Client Mode  Supported HTTP and/or UDP  Supported mjS scripting  110-240VAC Maximum 200 wattsLeading edge Trailing edge  Current measurement  Protected against overload  Protected against overheating  Protected against voltage peaks  Free Android or IOS Shelly Cloud App  Works with MQTT  Easy to install  Built-in distribution box, DIN rail  Scene activation via App

With this module you can wirelessly switch and dim your lamps or devices on or off via your smartphone! Your physical wall switch will continue to work as usual. Set up some fun scenes (scenarios) in your smart-home system or use the free app. For example, with this module you can automatically turn on your lights when the sun sets. Or dim your lights a bit in the middle of the night. FeaturesOpen sourceWorks stand-alone via WiFi 2.4 GhzBuilt-in web serverAccess Point and Client ModeSupported HTTP and/or UDP110-240VAC;0-220W Halogen with blue neutral wire0-200W LED with blue neutral wireMin. 10W without blue neutral wire or otherwise with Bypass.Protected against overheating and overloadWorks with MQTT< li>Works with Google Home or AlexaEasy to installRecessed, behind (wall) switchWorks with switch, pulse switch, hotel switch< li>Pulse switch for dimmingScene activation via AppESP8266 with 4MB flash/debug chipMax. load to be setNo blue neutral wire required for connectionManual