The SONOFF Basic DIN Rail Zigbee Smart Switch (BASIC-ZB1GSP) is a 1-module-wide Zigbee 3.0 switch for the consumer unit. It switches one final circuit up to 32 A (officially 7680 W maximum) at 100–240 V AC, 50/60 Hz, and it measures voltage, current, power and energy. According to SONOFF the contact is double-pole: both the phase and the neutral conductor are interrupted. Overload limits, schedules and scenes are set via a Zigbee 3.0 gateway.
It is intended for higher loads in the distribution board, always within the 32 A limit and the applicable installation rules. The housing is 84 × 66.5 × 18 mm and clips onto a standard DIN rail. SONOFF advises copper conductors of 4 to 10 mm². As a mains-powered Zigbee device it can also act as a Zigbee router and strengthen the mesh in the meter cupboard. Operating temperature: −15 to 50 °C.
Specifications
- Model: BASIC-ZB1GSP
- Mounting: DIN rail, 1 module wide (18 mm)
- Supply/load: 100–240 V AC, 50/60 Hz, 32 A max. (7680 W)
- Switching: double-pole (phase and neutral), according to SONOFF
- Energy metering: voltage, current, power and consumption
- Protocol: Zigbee 3.0; also a Zigbee router
- Conductor size (official): 4–10 mm² copper
- Dimensions: 84 × 66.5 × 18 mm; operating temperature −15 to 50 °C
Have installation in the consumer unit carried out by a qualified installer, with the correct upstream protection. A Zigbee 3.0 gateway is required; measurements and protection options may differ by gateway.
| Actors: | Switch |
|---|---|
| Dimensions Product: | 84 x 66,5 x 18 mm |
| Installation method: | DIN rail |
| Matter: | No |
| Maximum load capacity: | 32A |
| Operating temperature: | -15℃ ~ 50℃ |
| Power source: | 100-240V AC, 50/60Hz |
| Protocol: | Zigbee |