FIBARO Home Center 3 is the most powerful and advanced smart home hub for monitoring, configuring and controlling the FIBARO system. The Home Center 3 communicates wirelessly via Z-Wave and the local area network (LAN) with other compatible devices. The HC3 includes an advanced recovery and backup system with watchdog function. Automate homes with block scenes, LUA scripts, Quick Apps, panels and profiles.Advanced software combined with high quality components guarantee stability and performance. Thanks to Z-Wave 500 the HC3 has an exceptional number of integrations with hundreds of smart devices from other manufacturers. The solutions with the Home Center 3 are endless.FeaturesUser-friendly and fast interfaceSupport for block and LUA scenesWorks as stand-alone controller, master or slave controllerRemote management via web interface and mobile appsAdvanced recovery and backup system (triple data security)Monitor and control the home with the Home Center AppBuilt-in panels for configuration of Alarm, Climate, Garden and ProfilesCompatible with voice assistants (Google Assistant, Amazon Alexa and Siri shortcuts)Compatible with cloud services like IFTTT, Facebook Messenger and FIBARO Installer AppIntegrate Z-Wave devices and other smart IoT devices via the built-in pluginsMost powerful gateway on the market with 4 x 1.2 GHz processor and 2 GB RAM memory

The Aqara Smart Wall Switch H1 EU is a built-in switch with the Zigbee 3.0 protocol. The switch does not require a neutral wire and is designed for controlling lighting and electrical appliances. The H1 switch works with the Aqara hubs and other compatible Zigbee hubs. The installation depth of the switch is approximately 38 mm and therefore fits in a standard round flush-mounted box. Differences between No Neutral and With Neutral versionNo Neutral = no active energy measurement, no overload protectionNeutral = active energy measurement, support for overload protection  FeaturesWorks with Zigbee 3.0 Fits in standard round flush-mounted boxHotel switch function in combination with Aqara Wireless H1 SwitchOverheating supportDoes not require neutral wire

The Aqara Smart Wall Switch H1 EU is a built-in switch with the Zigbee 3.0 protocol. The switch does not require a neutral wire and is designed for controlling lighting and electrical appliances. The H1 switch works with the Aqara hubs and other compatible Zigbee hubs. The installation depth of the switch is approximately 38 mm and therefore fits in a standard round flush-mounted box. Differences between No Neutral and With Neutral versionNo Neutral = no active energy measurement, no overload protectionNeutral = active energy measurement, support for overload protection  FeaturesWorks with Zigbee 3.0 Fits in standard round flush-mounted boxHotel switch function in combination with Aqara Wireless H1 SwitchOverheating supportDoes not require neutral wire

The Aqara Smart Wall Switch H1 EU is a built-in switch with the Zigbee 3.0 protocol. The switch does not require a neutral wire and is designed for controlling lighting and electrical appliances. The H1 switch works with the Aqara hubs and other compatible Zigbee hubs. The installation depth of the switch is approximately 38 mm and therefore fits in a standard round flush-mounted box. Differences between No Neutral and With Neutral versionNo Neutral = no active energy measurement, no overload protectionNeutral = active energy measurement, support for overload protection  FeaturesWorks with Zigbee 3.0 Fits in standard round flush-mounted boxHotel switch function in combination with Aqara Wireless H1 SwitchOverheating supportDoes not require neutral wire

The Aqara Smart Wall Switch H1 EU is a built-in switch with the Zigbee 3.0 protocol. The switch does not require a neutral wire and is designed for controlling lighting and electrical appliances. The H1 switch works with the Aqara hubs and other compatible Zigbee hubs. The installation depth of the switch is approximately 38 mm and therefore fits in a standard round flush-mounted box. Differences between No Neutral and With Neutral versionNo Neutral = no active energy measurement, no overload protectionNeutral = active energy measurement, support for overload protection  FeaturesWorks with Zigbee 3.0 Fits in standard round flush-mounted boxHotel switch function in combination with Aqara Wireless H1 SwitchOverheating supportDoes not require neutral wire

The Aqara Smart Wall Switch H1 EU is a built-in switch with the Zigbee 3.0 protocol. The switch does not require a neutral wire and is designed for controlling lighting and electrical appliances. The H1 switch works with the Aqara hubs and other compatible Zigbee hubs. The installation depth of the switch is approximately 38 mm and therefore fits in a standard round flush-mounted box. Differences between No Neutral and With Neutral versionNo Neutral = no active energy measurement, no overload protectionNeutral = active energy measurement, support for overload protection  FeaturesWorks with Zigbee 3.0 Fits in standard round flush-mounted boxHotel switch function in combination with Aqara Wireless H1 SwitchOverheating supportDoes not require neutral wire

The Aqara Smart Wall Switch H1 EU is a built-in switch with the Zigbee 3.0 protocol. The switch does not require a neutral wire and is designed for controlling lighting and electrical appliances. The H1 switch works with the Aqara hubs and other compatible Zigbee hubs. The installation depth of the switch is approximately 38 mm and therefore fits in a standard round flush-mounted box. Differences between No Neutral and With Neutral versionNo Neutral = no active energy measurement, no overload protectionNeutral = active energy measurement, support for overload protection  FeaturesWorks with Zigbee 3.0 Fits in standard round flush-mounted boxHotel switch function in combination with Aqara Wireless H1 SwitchOverheating supportDoes not require neutral wire

The Aqara Smart Wall Switch H1 EU is a built-in switch with the Zigbee 3.0 protocol. The switch does not require a neutral wire and is designed for controlling lighting and electrical appliances. The H1 switch works with the Aqara hubs and other compatible Zigbee hubs. The installation depth of the switch is approximately 38 mm and therefore fits in a standard round flush-mounted box. Differences between No Neutral and With Neutral versionNo Neutral = no active energy measurement, no overload protectionNeutral = active energy measurement, support for overload protection  FeaturesWorks with Zigbee 3.0 Fits in standard round flush-mounted boxHotel switch function in combination with Aqara Wireless H1 SwitchOverheating supportDoes not require neutral wire

The Aqara Smart Wall Switch H1 EU is a built-in switch with the Zigbee 3.0 protocol. The switch does not require a neutral wire and is designed for controlling lighting and electrical appliances. The H1 switch works with the Aqara hubs and other compatible Zigbee hubs. The installation depth of the switch is approximately 38 mm and therefore fits in a standard round flush-mounted box. Differences between No Neutral and With Neutral versionNo Neutral = no active energy measurement, no overload protectionNeutral = active energy measurement, support for overload protection  FeaturesWorks with Zigbee 3.0 Fits in standard round flush-mounted boxHotel switch function in combination with Aqara Wireless H1 SwitchOverheating supportDoes not require neutral wire

The Aqara Dual Relay Module T2 is an advanced Zigbee dual relay module to switch electrical devices, measure current and operate potential-free contacts. The module can control various types of devices, including garage doors, electric motors, water heaters, switches, lights and sockets. The T2 module supports two modes for switching contacts: regular (load) and potential-free (no load). Thanks to the two modes, the device can make traditional and electrical appliances intelligent. The Dual Relay Module T2 is compatible with popular smart home ecosystems through an Aqara Hub, including Apple Home, Alexa, Google Home and more. Flexible and versatile solution The Dual Relay Module T2 is versatile and can be used in a variety of ways. You can use the module to switch lights and sockets. The module can also be used to automate garage doors, tubular motors, boilers and heating valves. Heating based on heat demand The Aqara Radiator Thermostat E1 can be perfectly combined with the Dual Relay Module T2. The combination ensures that the heating is switched on the basis of the heat demand of one or more thermostats. This means that the heat source (for example a water heater/boiler/heating valve) is switched on the basis of the desired and measured temperature. Lock and motor control The Double Relay Module T2 is easy and safe to connect to AC motors. This allows the module to be used to operate the tubular motor and the roller shutter switch. Monitor energy and memory The dual relay module T2 has an on/off status memory function, which remembers the last status before the power failure. In addition, the module offers functions for measuring energy and reporting. Energy metering only works in regular (loaded) mode. Security features The module provides customizable values ​​for security features. The minimum and maximum overcurrent, overvoltage and power can be set here. When the values ​​are overwritten, the output is automatically switched off to ensure safety.Wireless switching mode Thanks to this function, the existing wall switch can be converted into a scene controller: arm or disarm the security system, control curtains or lights with your old wired switch.*** Installation on a DIN rail The design of the T2 is suitable for DIN rail mounting. This makes it easy to place the module in a control cabinet. The module is supplied with a DIN rail adapter as standard. To place the module in a flush-mounted box, a box of at least 60mm deep is required. The exact size of the module is: 45.5 × 48 × 24 mm. Maximum load capacityAC:100-250V, 50 /60Hz/Max.10A, Max 2500W (Incandescent Lamp); Max.1A, Max 250W(LED, CFL Fluorescent Lamp); Max 1A, Max 1/4 HP (Motor) M.1 DC: 24-30V: Max.10A, Max 300W (Resistive Load); 30-60V: Max.1A, Max 60W (Resistive Load); Attributes • Supports ZigBee 3.0 • Active energy metering in regular (loaded) mode • Overcurrent, overvoltage and overload protection. • Remember the on/off status in case of power failure • DIN rail mounting possible, adapter supplied as standard • Module can be powered with AC or DC • Can be used with different types of switches (pulse and toggle) • All-round compatibility with all popular ecosystems via Aqara hub

The Aqara Smart Plug has been developed for switching connected electrical devices. The Smart Plug works with Zigbee 3.0. The intermediate plug is suitable for switching max. 10A (2,300W) and is equipped with an active energy measurement function. This means that the device consumes more power from the connected device. The device is also equipped with protection against overheating and overload. The Smart Plug has plug type F (grounded) and has an input for grounding pin at the rear. The Smart Plug can be used with a timer (via a Zigbee Hub) to automatically switch devices. Compatible with popular smart home ecosystems through the Aqara Hubs, including HomeKit, Alexa, IFTTT and more. This is the official European version with CE approval and meets the legal requirements. Features Zigbee 3.0  Active energy metering Physical button for local control Protection against overload and overheating All-round compatibility with all popular ecosystems through the Aqara hubs

The Aqara Single Switch T1 is a very compact recessed switch module suitable for recessed boxes of (recommended) 55 mm. This version of the Aqara Single Switch T1 does not require a neutral wire to operate and can be loaded to 1,150W (5A resistive load). This is the official European version with CE approval and meets the legal requirements. FeaturesSupports ZigBee 3.0.No neutral wire required. Fits almost any wall box.Can be connected to your existing wall switch or outlet. 2-way switch support. Has overheat protection. Has timers and remote control.All-round compatibility with voice assistants: Apple Siri, Amazon Alexa, Google Assistant, and more are supported.Only suitable for non remote control lights. Wireless frequency: 2.4 GHz.

The Aqara Single Switch T1 is a very compact flush mount switch module suitable for flush mounting boxes of (recommended) 55 mm. This version of the Aqara Single Switch T1 requires a (blue) neutral wire to operate and can be loaded between 3 and 2500 Watts (resistive load). This is the official European version with CE approval and meets the legal requirements.FeaturesSupports ZigBee 3.0.Power monitoring. Fits almost any wall box. Can be connected to your existing wall switch or outlet. Power off memory.Overheat and overload protection. Has timers and remote control. All-round compatibility with voice assistants: Apple Siri, Amazon Alexa, Google Assistant, and more are supported.Wireless frequency: 2.4GHz.

The Aqara Temperature and Humidity Sensor T1 is a compact sensor with a built-in temperature, air pressure and relative humidity sensor. The sensor runs on a CR2032 battery and communicates via Zigbee. With the sensor you can monitor air quality, register data, receive notifications and create automations. The sensor records the temperature between -20℃ and +50℃ in steps of ±0.3℃. The humidity between 0% and 100% with an accuracy of ±3%. The air pressure between 30 kPa and 110 kPa with an accuracy of ±0.12 kPa. The T1 version is the successor to the previous generation and has several improvements, including Zigbee 3.0 and OTA support. This is the official European version with CE approval and meets the legal requirements. Compatible with popular smart home ecosystems through the Aqara Hubs, including Matter, HomeKit, Alexa, Google Home, IFTTT and more. In addition, the sensor is also directly compatible with SmartThings via the Aeotec Smart Home Hub. Compared to the previous generation, the T1 version also has support for Over-The-Air (OTA) updates. This is only possible in combination with an Aqara hub. Features Communication via Zigbee 3.0 Works on a battery (CR2032) Monitor air quality with the compact sensor Compatible with popular smart home ecosystems via the Aqara Hubs, including Matter, HomeKit, Google Home, Alexa, Homey Pro and more. Support for OTA updatesHomey Pro: Compatible from version 1.8.2

The Aqara Water Leak Sensor T1 is a compact water detector. The sensor runs on a battery (CR2032) and communicates via Zigbee 3.0. With the sensor you monitor a surface/space, the device detects water at a layer of 0.5mm (flat surface). In addition, the sensor has an IP67 rating, which means that the sensor is guaranteed to function in humid and dusty environments. The T1 version is the successor to the previous generation and has several improvements, including Zigbee 3.0 and OTA support. This is the official European version with CE approval and meets the legal requirements. Compatible with popular smart home ecosystems through the Aqara Hubs, including Matter, HomeKit, Alexa, Google Home, IFTTT and more. In addition, the sensor is also directly compatible with SmartThings via the Aeotec Smart Home Hub. Compared to the previous generation, the T1 version also has support for Over-The-Air (OTA) updates. This is only possible in combination with an Aqara hub. Features Communication via Zigbee 3.0 Works on a battery (CR2032) Monitor the room with the compact sensor Compatible with popular smart home ecosystems via the Aqara Hubs, including Matter, HomeKit, Google Home, Alexa, Homey Pro and more. Support for OTA updatesHomey Pro: Compatible from version 1.8.2

The Aqara Door and Window Sensor T1 is a compact sensor for detecting open and closed. The sensor runs on a CR1632 battery and communicates via Zigbee 3.0. With the sensor you can monitor objects such as doors and windows. The sensor is easy to install and no tools are required. You can use the status for automations and notifications. The T1 version is the successor to the previous generation and has several improvements, including Zigbee 3.0 and OTA support. This is the official European version with CE approval and meets the legal requirements. Compatible with popular smart home ecosystems through the Aqara Hubs, including Matter, HomeKit, Alexa, Google Home, IFTTT and more. In addition, the sensor is also directly compatible with SmartThings via the Aeotec Smart Home Hub. Compared to the previous generation, the T1 version also has support for Over-The-Air (OTA) updates. This is only possible in combination with an Aqara hub. Features Communication via Zigbee 3.0 Works on a battery (CR1632) Monitor doors and windows with the compact magnetic contact sensor Compatible with popular smart home ecosystems through the Aqara Hubs, including Matter, HomeKit, Google Home, Alexa and more. Support for OTA updatesHomey Pro: Compatible from version 1.8.2