Aqara Dual Relay Module T2
The Aqara Single Switch T1 by Xiaomi is a very compact flush-mounted switch module for 1 contact. For example, a single switch, a two-way circuit or a wall socket where a (blue) neutral wire is available.
Product number:
AR023CNW01
Manufacturer:
Aqara
Model:
DCM-K01
EAN:
6970504218635
Wireless protocol:
Zigbee
Product information "Aqara Dual Relay Module T2 "
The Aqara Dual Relay Module T2 is an advanced Zigbee dual relay module to switch electrical devices, measure current and operate potential-free contacts. The module can control various types of devices, including garage doors, electric motors, water heaters, switches, lights and sockets. The T2 module supports two modes for switching contacts: regular (load) and potential-free (no load). Thanks to the two modes, the device can make traditional and electrical appliances intelligent.
The Dual Relay Module T2 is compatible with popular smart home ecosystems through an Aqara Hub, including Apple Home, Alexa, Google Home and more.
Flexible and versatile solution
The Dual Relay Module T2 is versatile and can be used in a variety of ways. You can use the module to switch lights and sockets. The module can also be used to automate garage doors, tubular motors, boilers and heating valves.
Heating based on heat demand
The Aqara Radiator Thermostat E1 can be perfectly combined with the Dual Relay Module T2. The combination ensures that the heating is switched on the basis of the heat demand of one or more thermostats. This means that the heat source (for example a water heater/boiler/heating valve) is switched on the basis of the desired and measured temperature.
Lock and motor control
The Double Relay Module T2 is easy and safe to connect to AC motors. This allows the module to be used to operate the tubular motor and the roller shutter switch.
Monitor energy and memory
The dual relay module T2 has an on/off status memory function, which remembers the last status before the power failure. In addition, the module offers functions for measuring energy and reporting. Energy metering only works in regular (loaded) mode.
Security features
The module provides customizable values for security features. The minimum and maximum overcurrent, overvoltage and power can be set here. When the values are overwritten, the output is automatically switched off to ensure safety.
Wireless switching mode
Thanks to this function, the existing wall switch can be converted into a scene controller: arm or disarm the security system, control curtains or lights with your old wired switch.***
Installation on a DIN rail
The design of the T2 is suitable for DIN rail mounting. This makes it easy to place the module in a control cabinet. The module is supplied with a DIN rail adapter as standard. To place the module in a flush-mounted box, a box of at least 60mm deep is required. The exact size of the module is: 45.5 × 48 × 24 mm.
Maximum load capacity
AC:
AC:
100-250V, 50 /60Hz/Max.10A, Max 2500W (Incandescent Lamp);
Max.1A, Max 250W(LED, CFL Fluorescent Lamp);
Max 1A, Max 1/4 HP (Motor) M.1
DC:
24-30V: Max.10A, Max 300W (Resistive Load);
30-60V: Max.1A, Max 60W (Resistive Load);
Attributes
• Supports ZigBee 3.0
• Active energy metering in regular (loaded) mode
• Overcurrent, overvoltage and overload protection.
• Remember the on/off status in case of power failure
• DIN rail mounting possible, adapter supplied as standard
• Module can be powered with AC or DC
• Can be used with different types of switches (pulse and toggle)
• All-round compatibility with all popular ecosystems via Aqara hub
Properties "Aqara Dual Relay Module T2 "
| Actors: | Switch |
|---|---|
| Color: | White |
| Communicatie & Protocol: | Zigbee |
| Dimensions Product: | 42,9×40×19,9 mm |
| Installation method: | Flush mount |
| Maximum load capacity: | 10A |
| Operating humidity: | 5% ~ 95% |
| Platform: | Homekit |
| Power source: | 100-250VAC,50/60Hz |
| Protocol: | Zigbee, Zigbee 3.0 |
| Supported load types: | Resistive |
| Wireless frequency: | 2.4GHz (2400～2483.5MHz) |
| Wireless standard: | IEEE 802.15.4 |
Data according to manufacturer. Errors and changes reserved.
Downloads "Aqara Dual Relay Module T2 "
Compatibility
| Controller | Controller FW | Device FW | Compatibility Status | Note |
|---|---|---|---|---|
| Aqara Hub M2 | n/a | n/a | Compatible | |
| Aqara Camera Hub G2H | n/a | n/a | Compatible | |
| Athom Homey (Pro) | 5.0.0 | n/a | Compatible |
Aqara Camera E1
€49.58*
Login for trade prices
The Aqara Camera Hub G3 is a HomeKit Secure video with facial and gesture recognition. The Camera Hub G3 has a 2K 2304 x 1296p resolution. Thanks to the intelligent software and NPU processor, the Camera Hub G3 can recognize faces and gestures, which can be used for notifications and automations.
In addition, the device has a smart home hub function thanks to the built-in Zigbee 3.0 chip and IR controller. The device has a dual-band WiFi chip, which allows you to connect the Camera Hub G3 to the most popular WiFi frequency bands (2.4 GHz and 5 GHz).
The camera hub is equipped with a Type-C port that can be used as a video output. For this, the device uses the most universal connector with the UVC protocol. This provides low-latency and high-definition video output. This concerns the official European version with CE approval and meets the legal requirements.
Features
Zigbee 3.0 hub to control up to 128 devices
Compatible with all Aqara devices and allows control via Homekit, Alexa, Google Assistant and IFTTT
Can control existing infrared devices
Can be mounted anywhere thanks to the 1/4 threaded connection
Initiate video call via button – long press the camera button to send a video message.
Product number:
AC016GLW01
Aqara Camera Hub G2H Pro
€62.80*
Login for trade prices
The Aqara Camera Hub G2H Pro is an intelligent camera and Zigbee hub. The camera has 1080P Full HD resolution and features such as motion detection, sound detection, time-lapse recording and privacy cover. 2-way communication is also possible with the built-in microphone and speaker. The G2H Pro can store the video images on a MicroSD card and on a NAS**. Thanks to the Zigbee hub function, the Camera Hub can work together with Aqara sensors, controllers and other accessories. Finally, the Camera Hub Pro has support for HomeKit Secucre Video.
European version
This is the official European version with CE approval and meets the legal requirements.
Features
Built-in sirenSubscription-free notificationsInvisible IR night LEDs
146° wide-angle lens and 1080p sensor
360° Stand and Flexible Placement
Zigbee 3.0 hub to control up to 128 devices
Compatible with all Aqara devices and allows control via Homekit, Alexa, Google Assistant and IFTTT
Full HomeKit support, the G2H Pro has enhanced HomeKit support. In addition to HomeKit Secure Video* and HomeKit enabled 2-way audio, it now supports all 4 modes of the HomeKit Security System which is also automatically synchronized with the Aqara Security Guard.
Support for streaming to smart displays such as Google Home
MicroSD support - up to 512GBTimelapse function that allows the day to be summarized in one short videoActivity and privacy masking zones, the G2H Pro has a local privacy masking feature, which prevents certain parts of the image from being recorded or sent to third-party servers, such as Google or Amazon.
Face and Packet Recognition*: Thanks to HomeKit Secure Video, the G2H Pro also supports Face and Packet Recognition and notifications that are being processed
Exceptions* To HomeKit To support Secure Video, an iCloud subscription, a HomeKit hub, and up-to-date iOS/iPad OS/tvOS are required.
** Some features may not be available at launch time
*** Aqara sensors required for this functionality
Product number:
AC009GLW01
Aqara Camera Hub G3 (EU)
€90.90*
Login for trade prices
The Aqara Camera Hub G3 is a HomeKit Secure video with facial and gesture recognition. The Camera Hub G3 has a 2K 2304 x 1296p resolution. Thanks to the intelligent software and NPU processor, the Camera Hub G3 can recognize faces and gestures, which can be used for notifications and automations.
In addition, the device has a smart home hub function thanks to the built-in Zigbee 3.0 chip and IR controller. The device has a dual-band WiFi chip, which allows you to connect the Camera Hub G3 to the most popular WiFi frequency bands (2.4 GHz and 5 GHz).
The camera hub is equipped with a Type-C port that can be used as a video output. For this, the device uses the most universal connector with the UVC protocol. This provides low-latency and high-definition video output. This concerns the official European version with CE approval and meets the legal requirements.
Features
Zigbee 3.0 hub to control up to 128 devices
Compatible with all Aqara devices and allows control via Homekit, Alexa, Google Assistant and IFTTT
Can control existing infrared devices
Can be mounted anywhere thanks to the 1/4 threaded connection
Initiate video call via button – long press the camera button to send a video message.
Product number:
AC005EUW01
Aqara Ceiling Light T1M
€123.96*
Login for trade prices
The Aqara LED Lamp can be used in many places thanks to the E27 fitting. The LED Lamp is dimmable and the colour range of the LED Lamp is 2700K - 6500K. This allows the lamp to be used as mood lighting but can also be set to a cool white mode for extra productivity. The maximum brightness of the lamp is 806 lumens and it has up to 25,000 hours of operation. This is the official European version with CE approval and meets the legal requirements.
Product number:
AL191GLW01
Aqara Cube T1 Pro
€19.00*
Login for trade prices
The Aqara Cube T1 Pro has all the advantages of its predecessor and significant improvements. The device is even easier to use, is supported by HomeKit and works with Zigbee 3.0. In addition, the actions are easily recognizable because each side has a dice indicator. The Aqara Cube T1 Pro has wide compatibility thanks to the new Scene Mode. The latter modes have been developed for use as a controller in the HomeKit ecosystem.
Aqara's lighting and curtain products can be used optimally with the new controller. By turning the Cube T1 Pro you can adjust the brightness and color temperature of lighting and control the opening percentage of the curtain. The function is configurable in the Aqara Home App.
Two modes – Scene Mode & Action Mode
With Scene Mode, you can use either side to control scenes or devices. Each side has a dice-like indicator that makes it clear which side is controlling which device.
With the Action Mode you use the Cube T1 Pro as the classic Cube, making the device behave like the classic Cube while retaining other advantages such as Zigbee 3.0. The Cube T1 Pro has 6 different movements in these modes, including: slide, tilt, rotate, touch, flip (180°) and turn (90°).
Compatible with popular smart home ecosystems through the Aqara Hubs, including HomeKit, Alexa, IFTTT and more. Finally, the Aqara Cube T1 Pro supports OTA updates. This means improvements and fixes can be added via firmware updates via an Aqara Hub. Matter support will be available through an OTA update.
Features
Zigbee 3.0
Two modes for wide compatibility
Battery powered (CR2450 supplied as standard)
Future-proof thanks to support for OTA updates
All-round compatibility with all popular ecosystems
Product number:
AR020GLW01
Aqara Curtain Driver E1 (Track Version)
€74.37*
Login for trade prices
The Aqara Curtain Driver E1 is a retrofit curtain controller with Zigbee 3.0. The device is easy to hang on the rail or the rod. Enjoy automatic control of the existing curtains based on the weather, time, temperature or other triggers. The Curtain Driver E1 has a powerful motor and can pull heavy curtains (up to 12kg). In addition, the device has an adjustable opening speed, so that the motor works more quietly or the curtain opens slowly. There is also support for device grouping, so you can open a window with two curtains at the same time with two Curtain Drivers. This is the official European version with CE approval and complies with the legal requirements.Two versions available: Track and Rod
The Curtain Driver E1 supports almost all curtain rails or rods.
Rod version: supports all types of rods
Track version: supports all U- and I-railsThe product has a built-in battery (6400 mAh) and can be charged via USB Type-C cable. The device can also be continuously supplied with power via this input. Note: For constant power supply, the cable must be placed freely to avoid tangling.
The battery life of the Curtain Driver E1 is on average 1 year. Actual life may vary depending on curtain weight, rail length and friction. Based on the following data, the Curtain Driver will work for about 9 – 10 months: a rail of 1.5 meters, a curtain with a weight of 12 kg, open and close once a day.
Compatible with popular smart home ecosystems through the Aqara Hubs, including HomeKit, Alexa, IFTTT and more. Matter support will be available via an OTA update via the Aqara Hubs.
Features
Zigbee 3.0
Maximum load of 12kg
Built-in rechargeable battery
USB Type-C for charging or constant power supply
Easy installation without additional tools
Support for adjustable opening speed and device grouping
Built-in light sensor for automatic control
All-round compatibility with all popular ecosystems via the Aqara hubs
Product number:
AM025GLW01
Aqara Curtain Driver E1 (Rod Version)
€82.64*
Login for trade prices
The Aqara Curtain Driver E1 is a retrofit curtain controller with Zigbee 3.0. The device is easy to hang on the rail or the rod. Enjoy automatic control of the existing curtains based on the weather, time, temperature or other triggers. The Curtain Driver E1 has a powerful motor and can pull heavy curtains (up to 12kg). In addition, the device has an adjustable opening speed, so that the motor works more quietly or the curtain opens slowly. There is also support for device grouping, so you can open a window with two curtains at the same time with two Curtain Drivers. This is the official European version with CE approval and complies with the legal requirements.Two versions available: Track and Rod
The Curtain Driver E1 supports almost all curtain rails or rods.
Rod version: supports all types of rods
Track version: supports all U- and I-railsThe product has a built-in battery (6400 mAh) and can be charged via USB Type-C cable. The device can also be continuously supplied with power via this input. Note: For constant power supply, the cable must be placed freely to avoid tangling.
The battery life of the Curtain Driver E1 is on average 1 year. Actual life may vary depending on curtain weight, rail length and friction. Based on the following data, the Curtain Driver will work for about 9 – 10 months: a rail of 1.5 meters, a curtain with a weight of 12 kg, open and close once a day.
Compatible with popular smart home ecosystems through the Aqara Hubs, including HomeKit, Alexa, IFTTT and more. Matter support will be available via an OTA update via the Aqara Hubs.
Features
Zigbee 3.0
Maximum load of 12kg
Built-in rechargeable battery
USB Type-C for charging or constant power supply
Easy installation without additional tools
Support for adjustable opening speed and device grouping
Built-in light sensor for automatic control
All-round compatibility with all popular ecosystems via the Aqara hubs
Product number:
AM025GLW02
Aqara Curtain Driver Starter Kit
€173.51*
Login for trade prices
With the Aqara Curtain Driver Starter Kit you have a complete solution to get started right away. The Aqara Curtain Driver E1 is the simplest solution to make your curtains smart. The Curtain Driver E1 is a retrofit curtain motor for operating and automating curtain rails. Smart schedules allow you to open the curtains at the desired times. Two advantages of this are that you enjoy the sun in your home and the heat is well distributed. Automatic curtain control brings more comfort, extra living comfort and a luxurious experience.
The Starter Kit contains the Aqara Hub E1 for access to the Aqara app. You can expand the hub with more smart products as needed. Via the mobile app (iOS + Android) you can automate the curtain motor and connect it to other smart ecosystems, including Apple HomeKit.
Content
2x Aqara Curtain Driver E1 Track Version
1x Aqara Wireless Switch Mini
1x Aqara Hub E1
Use cases
Geofencing automation
Smart scheduling and remote control
Control with your favorite voice assistant
For left, right or center closing curtains
Open and close the curtain with the wireless button
Save on your energy consumption with curtains
See for more information
Aqara Curtain Driver E1 Track Version
Aqara Wireless Switch MiniAqara Hub E1
Product number:
KIT_curt
Aqara Door and Window Sensor P2
€24.79*
Login for trade prices
De Aqara Door and Window Sensor P2 combineert Thread & Matter-ondersteuning in een iconische sensor. Het biedt gebruikers de mogelijkheid om de sensor direct te verbinden met een Thread Border-router van andere fabrikanten. Dit heeft twee belangrijke voordelen: de sensor kan direct worden gekoppeld aan een slimme speaker en profiteren van Matter-functionaliteit. Daarnaast biedt de nieuwe sensor geavanceerde automatiserings- en beveiligingsfuncties waar Aqara* bekend om staat.
Belangrijk: De Aqara Door and Window Sensor P2 werkt alleen met een Thread Border Router. De Hub M3 is de enige Thread border router in het assortiment van Aqara. Voor sommige functies is een Aqara Border Router nodig. Bekijk uitgebreide beschrijving voor meer informatie.
Matter ondersteuning*
Met Matter hoeven gebruikers zich geen zorgen meer maken over verschillende ecosystemen en technische protocollen. Het enige wat nodig is, is een Matter-compatibele app en een Thread Border-router die Matter ondersteunt, wat resulteert in een vereenvoudigde verbinding tussen ecosystemen en platforms.
Controle van status
Blijf volledig op de hoogte met realtime meldingen op je smartphone. Je zult nooit een potentiële dreiging missen en hebt volledige controle over de veiligheid.
Lokale huisautomatisering:
Integreer de Door Window Sensor P2 in je smart home-ecosysteem om geavanceerde automatiseringen te creëren. Bijvoorbeeld het aanpassen van thermostaatinstellingen of het activeren van een beveiligingscamera wanneer een deur wordt geopend. Deze automatiseringen worden lokaal uitgevoerd, zonder afhankelijkheid van de cloud. Dit beschermt de privacy van de gebruiker en zorgt ervoor dat de automatiseringen blijven werken, zelfs zonder internetverbinding.
Ondersteuning van spraakassistenten:
De Aqara Door and Window Sensor P2 ondersteunt Apple Siri en Alexa. Via spraakassistenten kun je waarschuwingen ontvangen, deuropeningen controleren en de status van de deur controleren.
Eenvoudige installatie en onderhoud
Gebruikers kunnen het op verschillende locaties en in verschillende situaties gebruiken. Met de krachtige CR123A-batterij** hoeven gebruikers zich geen zorgen te maken over frequente batterijvervanging, aangezien de batterij naar verwachting ongeveer 2 jaar meegaat.
Extra functies in de Aqara Home App***
De P2-sensor heeft uitgebreide lokale parametersettings die beschikbaar zijn via de Hub M3. Gebruikers kunnen de gevoeligheid van de sensor fijn afstellen binnen een bereik van 1-3 cm en de slaaptijd aanpassen op basis van specifieke scenario's. Daarnaast kan de knop worden gebruikt om verschillende smart home-automatiseringen te activeren. Tot slot stuurt de Tamper Alarm-functie onmiddellijk waarschuwingen naar je smartphone als de sensor wordt gesaboteerd.
Disclaimer
* Een Thread Border Router en/of Matter Controller is vereist om de Door and Window Sensor P2 te gebruiken met een compatibel ecosysteem.
** De levensduur van de batterij is afhankelijk van de verbinding met de Border Router en de Matter app. Voor de beste resultaten wordt een Aqara Border Router aanbevolen.
*** Voor ondersteuning van Matter over Thread in de Aqara Home app is de Aqara Hub M3 vereist. De Aqara Hub M3 wordt verwacht in Q4 2023.
Kenmerken
Batterijgevoed (CR123A)
Deur Raam Sensor met Thread
Controleer de open/dicht status
Voor verbinding met Matter is Thread Border Router vereist
Product number:
AS056GLW02
Aqara Door and Window Sensor T1
€16.52*
Login for trade prices
The Aqara Door and Window Sensor T1 is a compact sensor for detecting open and closed. The sensor runs on a CR1632 battery and communicates via Zigbee 3.0. With the sensor you can monitor objects such as doors and windows. The sensor is easy to install and no tools are required. You can use the status for automations and notifications.
The T1 version is the successor to the previous generation and has several improvements, including Zigbee 3.0 and OTA support. This is the official European version with CE approval and meets the legal requirements.
Compatible with popular smart home ecosystems through the Aqara Hubs, including Matter, HomeKit, Alexa, Google Home, IFTTT and more. In addition, the sensor is also directly compatible with SmartThings via the Aeotec Smart Home Hub.
Compared to the previous generation, the T1 version also has support for Over-The-Air (OTA) updates. This is only possible in combination with an Aqara hub.
Features
Communication via Zigbee 3.0
Works on a battery (CR1632)
Monitor doors and windows with the compact magnetic contact sensor
Compatible with popular smart home ecosystems through the Aqara Hubs, including Matter, HomeKit, Google Home, Alexa and more.
Support for OTA updatesHomey Pro: Compatible from version 1.8.2
Product number:
AS070GLW01
Aqara Dual Relay Module T2
€28.92*
Login for trade prices
The Aqara Dual Relay Module T2 is an advanced Zigbee dual relay module to switch electrical devices, measure current and operate potential-free contacts. The module can control various types of devices, including garage doors, electric motors, water heaters, switches, lights and sockets. The T2 module supports two modes for switching contacts: regular (load) and potential-free (no load). Thanks to the two modes, the device can make traditional and electrical appliances intelligent.
The Dual Relay Module T2 is compatible with popular smart home ecosystems through an Aqara Hub, including Apple Home, Alexa, Google Home and more.
Flexible and versatile solution
The Dual Relay Module T2 is versatile and can be used in a variety of ways. You can use the module to switch lights and sockets. The module can also be used to automate garage doors, tubular motors, boilers and heating valves.
Heating based on heat demand
The Aqara Radiator Thermostat E1 can be perfectly combined with the Dual Relay Module T2. The combination ensures that the heating is switched on the basis of the heat demand of one or more thermostats. This means that the heat source (for example a water heater/boiler/heating valve) is switched on the basis of the desired and measured temperature.
Lock and motor control
The Double Relay Module T2 is easy and safe to connect to AC motors. This allows the module to be used to operate the tubular motor and the roller shutter switch.
Monitor energy and memory
The dual relay module T2 has an on/off status memory function, which remembers the last status before the power failure. In addition, the module offers functions for measuring energy and reporting. Energy metering only works in regular (loaded) mode.
Security features
The module provides customizable values for security features. The minimum and maximum overcurrent, overvoltage and power can be set here. When the values are overwritten, the output is automatically switched off to ensure safety.Wireless switching mode
Thanks to this function, the existing wall switch can be converted into a scene controller: arm or disarm the security system, control curtains or lights with your old wired switch.***
Installation on a DIN rail
The design of the T2 is suitable for DIN rail mounting. This makes it easy to place the module in a control cabinet. The module is supplied with a DIN rail adapter as standard. To place the module in a flush-mounted box, a box of at least 60mm deep is required. The exact size of the module is: 45.5 × 48 × 24 mm.
Maximum load capacityAC:100-250V, 50 /60Hz/Max.10A, Max 2500W (Incandescent Lamp);
Max.1A, Max 250W(LED, CFL Fluorescent Lamp);
Max 1A, Max 1/4 HP (Motor) M.1
DC:
24-30V: Max.10A, Max 300W (Resistive Load);
30-60V: Max.1A, Max 60W (Resistive Load);
Attributes
• Supports ZigBee 3.0
• Active energy metering in regular (loaded) mode
• Overcurrent, overvoltage and overload protection.
• Remember the on/off status in case of power failure
• DIN rail mounting possible, adapter supplied as standard
• Module can be powered with AC or DC
• Can be used with different types of switches (pulse and toggle)
• All-round compatibility with all popular ecosystems via Aqara hub
Product number:
AR023CNW01
Aqara Energy & Comfort Starter Kit
€156.98*
Login for trade prices
With the Aqara Energy & Comfort Starter Kit, you have a complete solution to get started right away. The Aqara Smart Plug is the most convenient solution to save energy. With the Smart Plug you can create numerous smart scenes to automate your electronics. Thanks to the timer mode & active energy metering keeps you in control of your energy bill. The advantage of the Smart Plug is that it works even when there is no active internet connection.
The Starter Kit contains the Aqara Hub E1 for access to the Aqara app. You can expand the hub with more smart products as needed. Via the mobile app (iOS + Android) you can automatically connect the smart plugs to other smart ecosystems, including Apple HomeKit.
Content
5x Aqara Smart Plug
1x Aqara Wireless Remote Switch H1 (Double Rocker)
1x Aqara Hub E1
Use cases
Remote Operation
Geofencing automation
Control with your favorite voice assistant
The timer mode for automatic shifting
Understand power consumption with simple reports
Control your lighting and electronics with the wireless switch
See for more information
Aqara Smart Plug
Aqara Wireless Remote Switch H1 Double Rocker
Product number:
KIT_ener
Aqara Hub E1
€22.31*
Login for trade prices
The Aqara Hub E1 is the most compact smart home hub with support for all Aqara devices. Thanks to its compact size, the device can be placed anywhere. In addition, the E1 Hub can be used as a WiFi repeater. Features< ul>Most compact Zigbee 3.0 Hub to control up to 128 devicesCompatible with all Aqara devices and allows control via HomeKit, Alexa, Google Assistant and IFTTTPowered via USB-A port, can be used in a PC, laptop, power bank, plug adapter or routerAdjustable position, can be rotated to almost any angle (210 degrees)Wi-Fi Repeater Function: The Hub E1 not only extends a Zigbee network, but also acts as a Wi-Fi 2.4GHz repeater and makes the coverage of other Aqara hubs and other Wi-Fi devices more stable
Product number:
AG022GLW01
Aqara Hub M1S Gen2
€46.27*
Login for trade prices
The Aqara Hub M1S Gen2 is the smart home hub for the control and automation of Aqara Zigbee devices. The M1S supports all Aqara devices (EU version) and can control up to 128 devices. The hub features a built-in speaker, RGB light and light sensor, unlike the previous M1S, the sensor can be used in automations via the Aqara App. In addition, the ringtones are configurable, making it possible to upload user-defined MP3 files and use them in automations.Features
Zigbee 3.0 hub to control up to 128 devices
Compatible with all Aqara devices and allows control via Homekit, Alexa, Google Assistant and IFTTT
Configurable ringtones via MP3 files
Support for all 4 HomeKit alarm modes
Improved WiFi connectivity with a more powerful 2 x 2 MIMO antenna
Built-in speaker, RGB light and light sensor
Product number:
AG036EUW01
Aqara Hub M2
€49.58*
Login for trade prices
The Aqara Hub M2 is the most advanced one in the Aqara range. The Hub M2 uses Zigbee 3.0 and can connect up to 128 smart Zigbee devices to realize your smart home. The Hub M2 also has a built-in IR transmitter that allows you to automate non-Zigbee devices such as your TV or air conditioner. The built-in speaker makes sure that the M2 Hub can also be used as a doorbell gong or alarm siren. The Hub M2 can also be operated via Apple HomeKit or the Aqara Home app. The connection to the internet can be either wired or wireless and the Hub M2 provides power through the included Micro USB cable. This is the official European version with CE approval and meets the legal requirements. Besides security, this also ensures that when you want to connect the Hub M2 to Xiaomi's servers, this happens with the European servers and not those in China.FeaturesSupports ZigBee 3.0.360 infrared control. Ethernet RJ-45 port.Built-in speaker. Flexible installation. Optional battery backup. All-round compatibility with voice assistants: Apple Siri, Amazon Alexa, Google Assistant, and more are supported.Support of all the four apple HomeKit native alarm modes. Up to 128 Aqara Zigbee devices can be connected.
Product number:
AG035EUB01
Aqara Hub M3
€107.43*
Login for trade prices
The Hub M3 is a versatile Hub that can be used in various ways. The following protocols are in place; Zigbee 3.0, Thread, Bluetooth, Infrared and Wifi 2.4 and 5Ghz.
As an Aqara Hub, it is suitable for connecting and automating Aqara Zigbee 3.0 and Aqara Thread products. Bluetooth is used to detect and easily connect products via Thread. The infrared blaster can be used for teaching and controlling devices and has a special infrared air conditioning integration and both can be used as a Matter device (a Matter profile must be available).
The Hub M3 also has a speaker with customizable ringtones and a maximum volume of 95dB. The perfect addition to your alarm system or Aqara G4 doorbell.The integration of Thread products from other manufacturers is possible. But a required profile may be missing.The Hub M3, like other Aqara products, can be linked to Google Home, Alexa and has a very extensive link to Homekit. As a Matter - Thread Border router, a link to a Matter network is also available. This makes it possible to connect Aqara Zigbee 3.0 devices to Matter.
Furthermore, Aqara focuses on local service with the Hub M3. Automations continue to function locally even if the internet is lost. Thanks to special ARK technology, when multiple Hub M3s are used, this Thread functionality will be taken over by another Hub M3 if the 'master' disappears.
Both 2.4 and 5GHz can be used for the installation. Furthermore, the Hub M3 has an RJ45 network port that is also POE suitable. This makes the Hub M3 easier to install in places where there is no immediate 230v supply. In addition to POE, the Hub M3 can be powered via a USB-C connector (5v 2A)
FeaturesZigbee 3.0 (Aqara) Thread Border routerMatterBluetooth (for connecting Thread devices)Wifi 2.4 and 5 GhzLAN RJ45 POE< /li>Power supply via POE or USB-C 5v 2AInfrared blaster 360 degrees (with learn-in function)Homekit suitable
Product number:
AG042GLB02
Aqara LED Strip T1
€41.31*
Login for trade prices
The Aqara LED Strip T1 is a multifunctional LED Strip with Zigbee 3.0. The strip can be used for RGB-CCT and Tunable White (6500K <> 2700K) and has a high color value (90 CRI). The unique thing about the LED Strip T1 is that each segment of the strip can display its own color setting. This makes it possible to display unique color effects. In addition, the strip has a local 'Music Sync' function, with which the LED strip colors along with the rhythm of the music. The LED Strip has a length of two meters and can be extended up to 10 meters with the Aqara LED Strip T1 Extension.
The LED Strip T1 is compatible with popular smart home ecosystems via an Aqara Hub, including Apple Home, Alexa, Google Home and more.
Matter support With Matter, users no longer have to worry about different ecosystems and technical protocols. The T1 is fully compatible with various smart home ecosystems. The T1 supports Matter through an Aqara hub.
16 million colors and adjustable white lightThere are countless possibilities to choose a color! With the option of adjustable white light ranging from cool (6500K) to warm (2700K), or lose yourself in a world of vibrant hues. In the "colorful lamp bead mode" you can choose your favorite color or set a scene with color changes for the perfect atmosphere.
RGBIC with gradient effectsThe strip is divided into 10 segments that can be individually configured. This allows you to set different colors, dimming levels and color programs.
Music sync mode: The LED Strip T1 has a built-in sound sensor that can adjust the light intensity to the rhythm of the music. To do this, the device listens to sound using a microphone and synchronizes the strip with the rhythm of the music. You can predict up to 8 default modes, create different moods and scenes and switch between them. You can also adjust the RGB color lighting and choose between warm and cold tones.
One strip with different color settingsWith the T1 strip you can assign different color settings to one LED strip to illuminate your room. In other words, you can set different parts of one strip in different colors to create unique atmospheres.
Adjustable length and easy installationThe LED Strip T1 can be shortened in segments of 20 cm and extended up to 10 meters. It can be expanded with the LED Strip T1 Extension Kit. In addition, the T1 has an IP44 rating, making it dust resistant and suitable for outdoor use.
Zigbee 3.0 with Repeater functionCompared to Wi-Fi based strips, the Strip T1 does not overload your WiFI network. It works as a Zigbee mesh repeater and makes your Zigbee network more reliable. In addition, the T1 has a much lower power consumption in standby mode, which makes the product more environmentally and budget friendly.
Features
Zigbee 3.0
IP44 rating
Length LED Strip is 2 meters
Expandable via LED Strip T1 Extension
Local music sync function
Compatible with Matter via Aqara Hub
LED Strip for RGB+CCT & Tunable White
Different color settings per 20 cm of the strip
Support for unique color gradient effects
Color temperature of 2700K – 6500K, RGB 16 million colors
All-round compatibility with all popular ecosystems via Aqara hub
Product number:
AL140EUW01
Aqara LED Strip T1 Extension 1m
€12.39*
Login for trade prices
Extension for the Aqara LED Strip T1. The Aqara LED Strip can be extended up to 10 meters. The extension has a built-in connector, so you don't need any extra accessories to connect the strips. This way you can provide a large surface with flexible lighting.
This product has been developed for the Aqara LED Strip T1
Product number:
AL140GLW01
Aqara Motion and Light Sensor P2
€28.92*
Login for trade prices
The Aqara Motion and Light Sensor P2 is a battery powered Thread & Matter sensor for detecting movement and measuring light intensity. It allows users to connect the sensor directly to a Thread Border router from other manufacturers.The Motion Sensor has a detection arc of 170 °. Moreover, thanks to the versatile 360-degree position, the sensor can be placed anywhere. Important: The Aqara Motion and Light Sensor P2 only works with a Thread Border Router. The P2 Sensor is not compatible with the current Aqara Zigbee hubs and Aqara Home App. The Aqara Border Router M3 is expected later in 2024.Matter supportWith Matter, users do not have to worry worry more about different ecosystems and technical protocols. All it takes is a Matter-compatible app and a Thread Border router that supports Matter, resulting in a simplified connection between ecosystems and platforms. Additional features in the Aqara Home AppThe P2 sensor has extensive local parameter settings that are available via the Hub M3. Users can, among other things, fine-tune the sensitivity and detection zone of the sensor.FeaturesBattery powered (CR2450 2x standard included)Motion sensorLight sensorConfigurable time-out detection (via M3 hub)Extra wide field of view< li>Customizable sensitivity (via M3 hub)All-round compatibility with all popular ecosystems
Product number:
AS067GLW01
Aqara Motion Sensor P1
€20.65*
Login for trade prices
The Aqara Motion Sensor P1 is a battery-powered ZigBee sensor for detecting movement and measuring light intensity. When detecting movement or changing the ambient light, the sensor will report to the ZigBee hub. The Motion Sensor has a detection arc of 170° for a maximum of 2 meters and 150° for a maximum of 7 meters. In addition, thanks to the versatile 360-degree position, the sensor can be placed anywhere. The Motion Sensor P1 has a configurable detection timeout (1 to 200 seconds) and adjustable sensitivity. The compact sensor has a battery life of 5 years. This can be achieved by turning off the LED indication and a detection timeout of longer than 30 sec.Compatible with popular smart home ecosystems via the Aqara Hubs, including HomeKit, Alexa, IFTTT, and more. Matter support will be available via an OTA update via the Aqara Hubs.
Features
Zigbee 3.0
Battery powered (CR2450 supplied as standard)
Motion sensor
Light sensor
Configurable timeout detection
Extra wide field of view
Adjustable sensitivity
All-round compatibility with all popular ecosystems
Product number:
AS038GLW01
Aqara Pet Feeder C1
€90.90*
Login for trade prices
The Aqara Pet Feeder C1 is a smart automatic feeder with Zigbee 3.0. The device is designed to connect to your smart home, run feed schedules and integrate into automations. The Pet Feeder C1 has a remote schedule and manual feed control function via the Aqara Hubs. You can easily set the schedules and automations via the Aqara Home app. This allows the Pet Feeder C1 to be activated via sensors or controllers. The ability to automate with the Pet Feeder C1 makes the product really smart.
Works locally
The Pet Feeder C1 runs on a USB power supply (the power supply is not included as standard) and has an optional backup battery (LR20). Because the schedule function is performed locally, this ensures that the Pet Feeder C1 will always function, even if the hub or internet connection goes down.
Statistics via Aqara Home app
No type of food and pet is the same. Thanks to the handy statistics, the Pet Feeder C1 provides insight into the amount of food consumed per day. Via the Aqara Home app you can add the portion in grams, this way you have access to statistics and you can give exactly as much food as your pet needs.
Feeder Tank
The feed tank has a large capacity of 4L, which is suitable for small and medium-sized pets. A 4-litre food tank is suitable for both cats and dogs up to 15 kg and can hold approximately 1.7 kg of animal food. This is one month of food for a 4 kg cat*. The feed tank keeps the feed fresh and dry. Desiccant is supplied as standard with the Pet Feeder C1. In addition, the lid has an anti-spill construction, so that the food does not fall out of the tank when the device is tilted. All parts that come into contact with food are made of safe material. The stainless steel bowl, plastic tank and rubber dispenser wheel are all easy to remove and clean.
Finally, the Pet Feeder C1 has a built-in microphone that can be used to record a message. The message is played when the feed is given. The microphone and message only work via the device and cannot be used via the Aqara hubs.Compatible with popular smart home ecosystems for voice control via the Aqara Hubs. Control via Siri, Alexa, Google, IFTTT works via Aqara Home scenes and automations.
Features
Zigbee 3.0
Repeater in the Zigbee network
Works on a USB-A connection
Optional backup battery (3 x LR20, not included as standard)
Automatic feeder with 4L tank
Schedule function for feed works locally
All-round compatibility with all popular voice assistants via the Aqara hubs
*Based on data from petmd.com (50g daily)
Product number:
AM036GLW01
Aqara Presence Sensor FP1E
€41.31*
Login for trade prices
The Aqara Presence Sensor FP1E is a presence sensor that works via Zigbee. The sensor uses advanced millimeter radar technology (mmWave) for accurate detection of people for presence. By using AI algorithm, manual error entry and machine learning, the sensor can detect better and better.The sensor can be attached to both the wall and the ceiling. When mounted on the wall, it can look forward 120 degrees (up to 6 meters) and even 180 degrees at a short distance. This is adjustable and can therefore detect movement on a surface of up to 35 square meters. Attached to the ceiling at a height of approximately 2.8 meters, it can see into a diameter of 8 meters for a total of 50 square meters.Features
Sensor for detecting presencemmWave technology
Zigbee Aqara hub and account required for setup
All-round compatibility with all popular ecosystems, including Apple Home
Power supply via USB (5v 1A)
Product number:
AS074GLW02
Aqara Presence Sensor FP2
€69.41*
Login for trade prices
The Aqara Presence Sensor FP2 is a unique presence sensor and works with WiFi. The sensor uses advanced millimeter radar technology (mmWave) for accurate human detection. The sensor works even with light movements. In addition, the sensor is equipped with zone positioning, which makes the sensor multifunctional for various applications. One room can be divided into up to 30 small zones. The sensor can recognize up to five people. Furthermore, the FP2 sensor has functions such as fall detection and a built-in light sensor.
The FP2 sensor supports several popular ecosystems, including Apple Home, without using an Aqara Hub. This makes the applicability of this unique sensor extremely wide.
Zone positioning & multi-person detection
One presence sensor can monitor a room up to approx. 40m2*. This is one of the major advantages compared to a regular PIR Motion Sensor. In addition, a room can be divided into up to 30 zones, for example the sofa, bed, desk. Individual automations can be created based on these zones.
The FP2 sensor can detect up to 5** people in a room simultaneously. This means that while you divide a room, you can also have the automations react automatically to the position of the different people.
Accuracy and privacy
With the FP2 sensor you take privacy into account and you have access to an extremely accurate sensor for automations. The signal can be detected without collecting images. Millimeter-wave technology is known for reliable detection regardless of your position, even when you are sitting or sleeping.
Works with Apple Home and more
The FP2 sensor is compatible with Apple Home, Alexa and Google Home. Both the presence and light sensor are recognized. The FP2 sensor can be integrated without a hub. This makes the use of the sensor extremely accessible and is a unique solution for those who want to expand their smart home****.
Fall Detection and Alerts
The FP2 sensor informs you when someone falls into a room***. This eliminates the need to place a camera indoors for constant monitoring. This makes the sensor the most private solution for monitoring you. The range is a radius of 2 meters with an accuracy of >98%. The recommended installation height is 2.5m – 2.8m.
Built-in light sensor, local automation and easy installation
With the built-in light sensor in the Aqara ecosystem you can make the most advanced automations. After the product is installed, the product works locally. The FP2's automations therefore work independently of the internet. Furthermore, there are different installation methods so that the sensor can be used for different scenarios.
IPX5 and hidden USB-C port
The IPX5 rating allows the sensor to be installed in humid environments, including bathrooms. The sensor has a USB-C port so you can easily use a cable length of your liking. The FP2 sensor comes standard with a Type-C cable of 2 meters.
*The recommended size is 10m2 – 40m2.
**The best result can be achieved with a maximum of 3 people.
*** Only ceiling placement is supported for fall detection. The feature can only detect most normal fall scenarios and cannot be used as a substitute for medical equipment. Currently, fall detection cannot distinguish between slowly falling against a wall or fainting after sitting.
****Bluetooth is available for future support of Matter.
Features
Sensor for detecting presence and tracking position
For detection of up to 5 people in a room
Works on standalone via WiFi, no Aqara Hub required
All-round compatibility with all popular ecosystems, including Apple Home
IPX5 rating
Power supply via USB Type-C cable
Product number:
AS055GLW02
Aqara Radiator Thermostat E1
€45.45*
Login for trade prices
The Aqara Radiator Thermostat E1 is a thermostatic valve with Zigbee 3.0. The device is designed to control most radiators used in living rooms, bathrooms and even underfloor heating. The thermostatic valve comes with adapters for different valves and is compatible with M30 x 1.5mm, Danfoss RA, RAV and RAVL. This is the official European version with CE approval and meets the legal requirements.
The Radiator Thermostat can be used with an external temperature sensor (incl. HomeKit). This allows the thermostatic valve to receive the measurements from the Aqara temperature and humidity sensor.Support for device grouping. When used with multiple radiators in one room, the thermostatic valves are synchronized for the most efficient way based on the current room temperature.To prevent waste, the Radiator Thermostat has a 2-in-1 door/window opening detection. The thermostatic valve can detect sudden drops in temperature. This can be done both on the basis of the built-in temperature sensor and via an Aqara Door/Window Sensor via automations. The solution with the external sensor works more reliably because the Radiator Thermostat E1 responds directly to the trigger of the Door/Window Sensor.The Radiator Thermostat is powered by 2 x AA batteries. The average battery life is approximately 1 year thanks to the energy-efficient Zigbee protocol. Actual service life may vary depending on usage. The battery life of 1 year is calculated based on the fact that the device is used: 8 times a day for 165 days and once every 2 weeks for 200 days.Compatible with popular smart home ecosystems through the Aqara Hubs, including HomeKit, Alexa, IFTTT and more. Matter support will be available via an OTA update via the Aqara Hubs.CharacterizeRelated to Zigbee 3.0:Works on 2x AA batteriesBuilt-in temperature sensor2-in-1 open window detectionCan be connected to external sensors, e.g. temperature sensor and door/window sensorLED screen with backlightCompatible with the most popular valves (M30 x 1.5mm, Danfoss RA, RAV and RAVL)All-round compatibility with all popular ecosystems via the Aqara hubs
Product number:
AA006GLW01