Aeotec Nano Dimmer

Compact flush-mount dimmer module with Z-Wave

€41.31*

Total Price incl. Accessories €41.31*

*Price is excluding VAT

Product number: ZW111

Manufacturer: Aeotec

EAN: 1220000013971

Product information "Aeotec Nano Dimmer"

The Aeotec Nano Dimmer is a flush mount module for controlling and dimming lighting via Z-Wave. The module is designed to be placed in a flush-mounting box and can be connected to a wall switch. The Aeotec Nano Dimmer works with 2- and 3-wire installations. Optional: Aeotec Dimmer Bypass for low wattage lighting

Features

Control dimmable lighting via Z-Wave
Maximum load 1,2A
Works in 2- and 3-wire setup
Supports energy measurement

Properties "Aeotec Nano Dimmer"

Actors:	Dimmer
Communicatie & Protocol:	Z-Wave
Installation method:	Flush mount
Maximum load capacity:	1.2A
Operating humidity:	8% - 80%
Operating temperature:	0-40°C
Power source:	120 - 240VAC, 50/60Hz
Protocol:	Z-Wave Plus
Supported load types:	Dimmer / 2- and 3-wire / Incandescent lamps, Halogen lamps with or without electronic transformer, Dimmable LED lamps (leading edge and trailing edge), Low voltage VAC LED lighting, Dimmable fluorescent lamps, Switch / only with 3-wire / Non-dimmable lamps, Compact fluorescent lamps with electronic rectifier, Fluorescent lamps with electronic ballast, Non-dimmable LED lamps Direct current LED lamps (VDC)

Data according to manufacturer. Errors and changes reserved.

Shelly Wave Pro Dimmer 1PM

The Shelly Wave Pro Dimmer 1PM is a DIN-rail-mounted dimmer. The module supports active energy measurement and is designed to dim a single light source. The Wave Pro Dimmer 1PM can be operated with 2 switches. The smart dimmer works with Z-Wave, using a Z-Wave 800 chipset, and is compatible with Homey, Home Center 3, and other platforms such as Home Assistant and SmartThings. You can easily install the dimmer in your fuse box on a DIN rail, allowing you to dim one light source with a maximum of 200 watts. Note! The dimmer does not yet have full support on the mentioned platforms. Check the current compatibility via the manual link below. Based on our own tests on the HC3, it seems possible to add the unit after several attempts, resulting in a usable endpoint. Note that the unit needs to be added in Singlechannel mode (see associations) and corrected. Supported Light Sources Incandescent bulbs Dimmable LED and CFL Dimmable electronic transformers Features 110-240VAC Z-Wave 800 chipset S2 security Maximum 200 watts (1 channel) 2 switch contacts Trailing edge Power measurement Overload protection Overheat protection Surge protection Fuse box installation, DIN rail 19mm width Manual

Product number: QPDM-0A1P01EU

€55.90*

Nice Dimmer-Control

The Nice Dimmer-Control has been developed for controlling different types of light sources. The Dimmer-Control supports two types of lighting dimming techniques, including trailing edge and leading edge. Thanks to the intelligent calibration, this is automatically detected. The Dimmer-Control can be used in 2- and 3-wire installations. The module measures the active power consumption of the connected lighting as standard. This product is intended for connection to FIBARO gateways, including the Home Center 3 and Home Center 3 Lite. The device communicates via Z-Wave. The device can be operated and automated via the Z-Wave network. Features Soft-start function Built-in active power and energy measurement function Intelligent light source detection via automatic calibration Works with various types of switches, including pulse, toggle and toggle switch

Product number: 301618130301

€67.39*

Shelly Wave Door/Window

The Shelly Wave Door/Window is a sensor designed to accurately detect the opening or closing of doors and windows. The sensor can also measure light intensity and features a tilt function specifically for tilt-and-turn windows to detect if a window is in a tilt or turn position. The Wave Door/Window sensor uses a Z-Wave 800 chipset, making it highly energy-efficient. To use the tilt function, the sensor itself, not the magnet, must be mounted on the movable part. Note! The sensor does not yet have full support on the mentioned platforms. Check the current compatibility via the manual link below. Based on our own tests on the HC3, the open/close detection works well, and Lux also works but only updates upon opening/closing or wake-up. The tilt function does not seem to work. Note that the unit needs to be added in Singlechannel mode (see associations) and corrected. Features Z-Wave 800 chipset S2 security Open/close, Lux, and Tilt detection CR2032 battery Sensor dimensions: 35 x 35 x 7 mm Magnet dimensions: 35 x 12 x 7 mm Indoor use Manual

Product number: QNDW-002CEU

€55.90*

Shelly Wave Pro Dimmer 2PM

The Shelly Wave Pro Dimmer 2PM is a DIN-rail-mounted dimmer. The module supports active energy measurement and is designed to dim 2 light sources. The Wave Pro Dimmer 2PM can be operated with 2 switches. The smart dimmer works with Z-Wave, using a Z-Wave 800 chipset, and is compatible with Homey, Home Center 3, and other platforms such as Home Assistant and SmartThings. You can easily install the dimmer in your fuse box on a DIN rail, allowing you to dim 2 light sources with a maximum of 200 watts per channel. Note! The dimmer does not yet have full support on the mentioned platforms. Check the current compatibility via the manual link below.Based on our own tests on the HC3, it seems possible to add the unit after several attempts, resulting in a usable endpoint for both channels. Note that the unit needs to be added in Singlechannel mode (see associations) and corrected. Supported Light Sources Incandescent bulbs Dimmable LED and CFL Dimmable electronic transformers Features 110-240VAC Z-Wave 800 chipset Maximum 200 watts per channel (2 channels) S2 security Trailing edge Power measurement Overload protection Overheat protection Surge protection Fuse box installation, DIN rail 19mm width Manual

Product number: QPDM-0A2P01EU

€64.90*

Shelly Pro Dimmer 1PM

The Shelly Pro Dimmer 1PM is a DIN rail mountable dimmer. The module supports active energy measurement and is designed for dimming 1 light source. The smart dimmer works with WiFi, LAN and Bluetooth and is therefore compatible with Homey, Smartthings and Home Assistant, among others. Thanks to the WiFi protocol, you can also use it without a hub via the Shelly Smart Home App. You simply place the dimmer in your distribution box on a DIN rail, you can dim 1 light source with a maximum of 200 Watts. Supported light sources Light bulb Dimmable LED and CFL Dimmable electronic transformers Features Open source ESP32 chip on board Works stand-alone via LAN or WiFi 2.4 Ghz Bluetooth for easy pairing Built-in web server Access Point and Client Mode Supported HTTP and/or UDP Supported mjS scripting 110-240VAC Maximum 200 wattsLeading edge Trailing edge Current measurement Protected against overload Protected against overheating Protected against voltage peaks Free Android or IOS Shelly Cloud App Works with MQTT Easy to install Built-in distribution box, DIN rail Scene activation via App

Product number: SPDM-001PE01EU

€55.90*

FIBARO Dimmer 2 250W

The FIBARO Dimmer 2 is a universal wireless dimmer module with energy consumption measurement. Applicable in 2- and 3-wire installations. The Dimmer 2 supports different types of lighting and dimming techniques. This is automatically detected by an intelligent algorithm. The Dimmer 2 also works stand-alone behind an existing switch. The module can be used in combination with a pulse switch for manual activation of scenes.FeaturesCan be used as stand-alone dimmer without intelligent functionsCan be used in 2-wire and 3-wire installationsAutomatic calibration based on type of lightingWorks with trailing edge and leading edge

Product number: FGD-212 ZW5

€66.00*

Shelly Pro Dimmer 2PM

The Shelly Pro Dimmer 2PM is a DIN rail mountable dimmer. The module supports active energy measurement and is designed for dimming 2 light sources. The smart dimmer works with WiFi, LAN and Bluetooth and is therefore compatible with Homey, Smartthings and Home Assistant, among others. Thanks to the WiFi protocol, you can also use it without a hub via the Shelly Smart Home App. You simply place the dimmer in your distribution box on a DIN rail, you can dim 2 light sources with a maximum of 200 Watts per channel.Supported light sourcesIncandescent lampDimmable LED and CFLDimmable electronic transformersFeatures Open source ESP32 chip on board Works stand-alone via LAN or WiFi 2.4 Ghz Bluetooth for easy pairing Built-in web server Access Point and Client Mode Supported HTTP and/or UDP Supported mjS scripting 110-240VAC Maximum 200 watts per channelLeading edgeTrailing edge Current measurement Protected against overload Protected against overheating Protected against voltage peaks Free Android or IOS Shelly Cloud App Works with MQTT Easy to install Built-in distribution box, DIN rail Scene activation via App

Product number: SPDM-002PE01EU

€64.90*

Shelly Dimmer 2

With this module you can wirelessly switch and dim your lamps or devices on or off via your smartphone! Your physical wall switch will continue to work as usual. Set up some fun scenes (scenarios) in your smart-home system or use the free app. For example, with this module you can automatically turn on your lights when the sun sets. Or dim your lights a bit in the middle of the night. FeaturesOpen sourceWorks stand-alone via WiFi 2.4 GhzBuilt-in web serverAccess Point and Client ModeSupported HTTP and/or UDP110-240VAC;0-220W Halogen with blue neutral wire0-200W LED with blue neutral wireMin. 10W without blue neutral wire or otherwise with Bypass.Protected against overheating and overloadWorks with MQTT< li>Works with Google Home or AlexaEasy to installRecessed, behind (wall) switchWorks with switch, pulse switch, hotel switch< li>Pulse switch for dimmingScene activation via AppESP8266 with 4MB flash/debug chipMax. load to be setNo blue neutral wire required for connectionManual

Product number: S-Dim

€28.90*

FIBARO Home Center 3 Lite

The FIBARO Home Center 3 Lite is the smaller basic version of the most advanced smart home system (Home Center 3). The device is designed on the software used in the Home Center 3. With the HC3L you can manage and automate other Z-Wave devices to control lighting, heating, blinds, climate and alarm solutions. The Home Center 3 Lite is recommended for small installations in apartments and houses (up to 100m2).Suitable for:Up to 40 Z-Wave devices (recommended)1 IP camera40 scenes10 Quick Apps5 PluginsFeaturesWireless communication via Z-Wave 700 technologyEfficient hardware architectureDesigned for small installations in flats and houses up to 100m2Easy and fast installationAdvanced automation via block scenes, LUA, panels and profilesHighest level of data securityCompatible with voice assistants (Google Assistant, Amazon Alexa and Siri shortcuts) Compatible with cloud services like IFTTT, Facebook Messenger and FIBARO Installer AppIntegrate Z-Wave devices and other smart IoT devices via built-in pluginsAdvanced backup and recovery system

Product number: HC3L-001 (1) EU

€142.00*

FIBARO Home Center 3

FIBARO Home Center 3 is the most powerful and advanced smart home hub for monitoring, configuring and controlling the FIBARO system. The Home Center 3 communicates wirelessly via Z-Wave and the local area network (LAN) with other compatible devices. The HC3 includes an advanced recovery and backup system with watchdog function. Automate homes with block scenes, LUA scripts, Quick Apps, panels and profiles.Advanced software combined with high quality components guarantee stability and performance. Thanks to Z-Wave 500 the HC3 has an exceptional number of integrations with hundreds of smart devices from other manufacturers. The solutions with the Home Center 3 are endless.FeaturesUser-friendly and fast interfaceSupport for block and LUA scenesWorks as stand-alone controller, master or slave controllerRemote management via web interface and mobile appsAdvanced recovery and backup system (triple data security)Monitor and control the home with the Home Center AppBuilt-in panels for configuration of Alarm, Climate, Garden and ProfilesCompatible with voice assistants (Google Assistant, Amazon Alexa and Siri shortcuts)Compatible with cloud services like IFTTT, Facebook Messenger and FIBARO Installer AppIntegrate Z-Wave devices and other smart IoT devices via the built-in pluginsMost powerful gateway on the market with 4 x 1.2 GHz processor and 2 GB RAM memory

Product number: FGHC3 EU BLACK

€569.00*

Aeotec MultiSensor 7

Aeotec MultiSensor 7 is a 6-in-1 Z-Wave sensor for detecting motion, temperature, light intensity, humidity, vibration and UV. The sensoris powered by 2x CR123A batteries or a Micro-USB. Optional: amounting bracket for wall mounting is available separately.FeaturesMultifunctional Z-Wave sensorMeasures temperature, humidity, light intensity and UVDetects motion and vibrationMotion detection up to 5mViewing angle of 120 degreesCompatible with popular Z-Wave controllers

Product number: ZWA024

€57.84*