Product information "Shelly Qubino Wave Pro 3"
The Shelly Qubino Wave Pro 3 is a DIN-Rail module with three (3) switching inputs and outputs. This Z-Wave module with 800 series Z-Wave chip makes it possible to switch three (3) different devices such as lighting, fans, infrared panels, heaters, valves and other electrical devices from a switch or distribution box.
It is possible to control the outputs on the module wirelessly via Z -Wave gateway, as well as using a physical (wall) switch connected to the input corresponding to the output on this module.
The maximum load capacity is 16A per relay output. The relay outputs are potential-free, can be switched between voltages from 0 to 240VAC (or 0 to 30 VDC) per module.
Supported load types
Resistive (Ohms) – Incandescent, halogen, heaters
Capacitive – Electronic equipment with capacitors
Inductive (with RC Snubber) – LED lighting, LED drivers, air conditioning and fans
Attention! The switch-on peak of inductive loads such as LED lighting damages the relays. Use the RC Snubber to absorb this switch-on peak.
Features
- Z- Wave800
- 110-240VAC
- Output 3x16A, max 48A total
- Switch connection 3x
- Protected against overload
- Protected against overheating
- Protected against voltage peaks
- Built-in groups/switch cabinet on DIN rail